Changing the effects on the Filter knobs S8

Options
Snorki
Snorki Member Posts: 10 Member
edited September 2022 in Traktor Software & Hardware

Hi, is there a way to have the four toggles on a remix deck be used for Changing the effects on the Filter knobs?

Tagged:

Answers

  • Uwe303
    Uwe303 Moderator Posts: 3,260 mod
    Options

    Hello,

    and yes, this should be possible

    But you need 5 pads if you want to select all fx directly (there is also a option with inc\dec where you would need only 2 pads)

    1. you create 5 times mixer fx selector, then like shown in the picture
    2. you learn the pads to the 5 created inputs (or 4 if you dont need all fx)
    3. set to value sets the fx, where 0 is select filtr, 1 to 5 are the fx
    4. try this maybe for 2 decks first and if it works and you need it for all 4 channels you have to look for the modifier that sets the functions deck a or c, and implement it here too as modifier
    5. means for 4 decks with all fx you would have to insert 6 times 4 the shown input
  • Isotoxin
    Isotoxin Member Posts: 129 Advisor
    edited September 2022
    Options

    My recommendation - map to use shift + fx filter knob itself to select preferred fx with a filter knob.

  • Snorki
    Snorki Member Posts: 10 Member
    Options

    it works :) thanks

  • Snorki
    Snorki Member Posts: 10 Member
    Options

    I DID it but ask how to do it by pressing the button to activate the effect to light up when active

  • Stevan
    Stevan Traktor Mapping Mod Posts: 1,771 mod
    Options

    You mean to activate when certain effect is selected? Like an indicator for a selected Mixer Effect?

  • Snorki
    Snorki Member Posts: 10 Member
    Options

    yessssssss :)

  • Stevan
    Stevan Traktor Mapping Mod Posts: 1,771 mod
    Options

    You could use dedicated output command. Like Uwe already said, you will need 5 pads/buttons.

    Add Out --> Mixer --> Mixer FX Selector

    Then use the controller range values to display different state in each button.

    Effect 1, min=0, max=0 (basic filter)

    Effect 2, min=1, max=1 (slot 1)

    Effect 3, min=2, max=2 (slot 2)

    Effect 4, min=3, max=3 (slot 3)

    Effect 5, min=4, max=4 (slot 4)

  • Sûlherokhh
    Sûlherokhh Member, Traktor Mapping Mod Posts: 1,949 mod
    Options
  • Snorki
    Snorki Member Posts: 10 Member
    Options

    I use these buttons to activate the effects but I want when I press it to light up to show that the effect is active

  • Snorki
    Snorki Member Posts: 10 Member
    Options

    anybody help me?

  • Uwe303
    Uwe303 Moderator Posts: 3,260 mod
    Options
Back To Top