Expression pedal with Komplete kontrol A49
Hello, Is there any way to use an expression pedal with Komplete kontrol A49? Please Help.
Best Answers
-
We also a little Knowledge Base article here:
How to Configure Sustain / Expression Pedals on KOMPLETE KONTROL Keyboards
0 -
can you be more descriptive when you say the "Signal Fluctuates"? Do you mean it is not sending a smooth signal (signal is jumpy)?
Can you record some automation in your DAW that shows the "fluctuations" and post a screenshot? Did you connect the pedal when the KB was powered on? if so, try removing the pedal, Power down the KB (unplug the USB), plug the pedal back in and then power up the KB (Plug the USB back in).
1 -
The KB detects the pedal when it is powered up and "decides" what type of pedal and how it should configure it. Glad its all sorted!!!
1
Answers
-
In the Midi assignment editor you change the pedal "Mode" to "Continuous", "Type" to "Ctrl Change" and controller # to 11. Info on the Assignments for Continuous Pedals can be found in the Manual Page 69. Info on the "Midi Assignment Editor" starts on page 63
1 -
We also a little Knowledge Base article here:
How to Configure Sustain / Expression Pedals on KOMPLETE KONTROL Keyboards
0 -
Thank you. But I have a problem. I am using compatible listed m-audio ex-p expression pedal, sustain works but when I assign the midi value for CC11 or CC7 and use the pedal, signal fluctuates. Could you please help on this. Does A series keyboard support expression pedal?
0 -
Did you run the Calibration process?
0 -
@officialsumitpathak Yes, A series support expression pedal. As Ed said, try the calibration. You can also check the MIDI activity of the pedal, with no other active music software as explained here: How to Monitor the Input of a MIDI Controller
If values still fluctuate, you should try the pedal on another keyboard to see if it's coming from the pedal or from the keyboard.
0 -
Thank you.
0 -
@Blindeddie Yes it asks to push the pedal all the way down and up. Nothing works, I also replaced the pedal from the shop. Tried invert swap t/r still nothing.
0 -
can you be more descriptive when you say the "Signal Fluctuates"? Do you mean it is not sending a smooth signal (signal is jumpy)?
Can you record some automation in your DAW that shows the "fluctuations" and post a screenshot? Did you connect the pedal when the KB was powered on? if so, try removing the pedal, Power down the KB (unplug the USB), plug the pedal back in and then power up the KB (Plug the USB back in).
1 -
Oh thanks unplugging the usb worked. That was simple. Yes it was not sending a smooth signal.
1 -
The KB detects the pedal when it is powered up and "decides" what type of pedal and how it should configure it. Glad its all sorted!!!
1
Categories
- 10.7K All Categories
- 20 Welcome
- 444 Hangout
- 58 NI News
- 207 Tech Talks
- 1.1K Native Access
- 4.9K Komplete
- 619 Komplete General
- 1.1K Komplete Kontrol
- 1.8K Kontakt
- 486 Reaktor
- 154 Battery 4
- 268 Guitar Rig & FX
- 202 Massive X & Synths
- 212 Other Software & Hardware
- 2.3K Maschine
- 14 Sampling Room
- 2.6K Traktor
- 2.4K Traktor Software & Hardware
- Check out everything you can do
- Create an account
- See member benefits
- Answer questions
- Ask the community
- See product news
- Connect with creators