Kontakt broke today.

michaelbadal
michaelbadal Member Posts: 5 Newcomer
edited October 2024 in Kontakt

Hey guys,

I woke up today to get back to work after a restful weekend only to find that all of my Kontakt libraries look broken and unusable. Prior to this issue, I hadn't done any new updates, installed new software, or moved any files around. So you can imagine my confusion. I went into NI Access 2 and saw there was a Kontakt 7 update and the update did not fix the problem.

Screen Shot 2024-01-15 at 8.44.53 AM.png Screen Shot 2024-01-15 at 8.44.19 AM.png Screen Shot 2024-01-15 at 8.43.53 AM.png


So then I decided to see if the problem persists in Kontakt 6 and 5 (which I still have on my machine) and the problem existed there as well.

Any ideas on what could be happening?

-- Michael

Comments

  • Monochrome
    Monochrome Member Posts: 1,407 Expert
    edited January 2024

    This can happen when the audio engine isn't running.

    Check its status by clicking the cog/gear icon in order to open Kontakt's Options window. Under "Audio", it should say "Running" under "Status". Also, make sure that a Core Audio driver is selected.

  • michaelbadal
    michaelbadal Member Posts: 5 Newcomer

    When I click the cog/gear icon, nothing happens. So I went to File -> Options and there isn't an Audio section in there. I've also tried doing the "!" icon and reloading the instrument and nothing happens.

    I'm trying to find out how to get the status of the audio engine. That will at least check one thing off the list.

  • michaelbadal
    michaelbadal Member Posts: 5 Newcomer

    I fixed it. :(

    My previous client sent me a project in 44.1khz which forced me to set my word clocks to that obviously.

    And then when I went to start a new project (which defaulted to 48khz) and my word clocks were still set to 44.1, it broke Kontakt.

    I shut down Logic, set my clock to 48, opened it again, and everything is back and working.

This discussion has been closed.
Back To Top

Categories