Help calibrating timecode vinyl on technic 1210 and djm mixer

lord-carlos

Choose either absolute or relative mode:

chazcc22

hi Lord Carlos, the songs playing and pausing on traktor now however all I can hear is a whizzing sound of the timecoded vinyl

Uwe303

You have to look into the djm manual, normally you find a dvs setup example, where the TT are routed to traktor (that seems to work) and the audio of traktor get routed back to the corresponding channels via USB too. So on the mixer channels you set USB as input, and within traktor you set external mixing mode - but like I said please have a look into the manual for all the details e.g. driver settings. The djm has a audio setup where you have to set phono from mixer to USB and USB audio from traktor to the mixer channels. Unfortunately I can't find an example right now for this pioneer djm setup.

Uwe303

https://www.pioneerdj.com/-/media/pioneerdj/software-info/mixer/djm-v10/djmixer-traktor_connection_guide_en.pdf/

Have a look here

chazcc22

I’ve done that and I can play and pause the song but I can’t hear it? It’s just a high pitch whizzing sound so presuming that’s what the traktor timecode vinyl sounds like?

lord-carlos

DJM is set to USB on those channels?

Uwe303

Have you looked I to the manual I have linked here, it's directly from pioneer, it's just for traktor 3 but it's all the same except for the wizard. You definitely need to set the pioneer settings right in that tool and the inputs to USB.