Update firmware A25

Nico
Nico Member Posts: 9 Member
edited October 22 in Other Software & Hardware

When can we expect an update firmware for the A25 keyboard so all buttons can be used in all DAW's? I only can use a few buttons so until I will not consider to buy a larger keyboard.

Answers

  • Uwe303
    Uwe303 Moderator Posts: 4,019 mod

    Hello,

    I think it's not a firmware issue it's an issue of the DAW integration I guess for your DAW there is no specific one so you use the mackie protocol? What DAW do you use?

  • Nico
    Nico Member Posts: 9 Member

    Thanks for your reply. I use Cakewalk by Bandlab as my DAW. I tried the mackie protocol but it didn't work also.

  • Uwe303
    Uwe303 Moderator Posts: 4,019 mod

    what did not work exactly, had you set it up correctly (daw port in and out set for a mackie device)

  • Nico
    Nico Member Posts: 9 Member
    afbeelding.png

    Thank you for the reply.

    I cannot ad the A25 keyboard to the output port. It is not available and stays 'None'. do you know how this comes?

    Best regards

    Nico

  • Uwe303
    Uwe303 Moderator Posts: 4,019 mod

    Can you check under the midi devices tab if both DAW ports are there, maybe something went wrong and the bomes midi driver native uses, is not installed correctly. If you are a windows user check under device manager if a bomes device is there, I had once that problem with my a49 and I installed the bomes midi driver from here: https://www.bome.com/products/bmidi

  • Nico
    Nico Member Posts: 9 Member

    do you know how this comes?

    afbeelding.png

    I have not yet installed Bome, but maybe the above is the problem.

    Best regards

    and thank you very much for your help

    Nico

  • Nico
    Nico Member Posts: 9 Member

    Means: not enough memory

    but my pc has 64 bit processor and 16gb ram

    all other programs work perfect

  • Uwe303
    Uwe303 Moderator Posts: 4,019 mod
    edited June 21

    can you make a picture without that window in front, here is an answer maybe this helps, second post:

    https://community.native-instruments.com/discussion/4378/missing-komplete-kontrol-daw-1-driver

  • Uwe303
    Uwe303 Moderator Posts: 4,019 mod
    edited June 21

    Ohh and it can also be the case, that you have another program open in background using those midi devices so cakewalk can´t use them, that´s why you get this window

    https://discuss.cakewalk.com/index.php?/topic/55300-midi-device-failure-the-following-midi-ports-could-not-be-enabled-solved/

  • Nico
    Nico Member Posts: 9 Member

    Strange? There is no other Midi device connected to my pc. Can it be something else?

  • Uwe303
    Uwe303 Moderator Posts: 4,019 mod
    edited June 23

    no it means that a program is using the other midi devices as far as i understand it, please also ask in the cakewalk forum it could be an issue on cakewalks side

This discussion has been closed.
Back To Top

Categories