Alicia's Pedal
Answers
-
So here's what I did.
After a fresh DL of "Noire" exhibited the same problem, I felt compelled to try another controller. I hadn't done this yet due to the fact that sustain was working on all non-piano sounds in standalone mode, and on every sound in host mode.
Regardless, I connected a USB controller and plugged into it the sustain pedal I had been using. For this particular M-Audio controller, the polarity of my pedal was reversed, but I was getting sustain!
I then connected a different pedal with a polarity switch and everything was good. Then...
I removed the M-Audio controller and returned to my formerly problematic Roland controller. Everything that had been dysfunctional was now working.
Don't know what to say about all of this, but for the moment, the gremlins are gone.
1 -
@Michael Groarke Thanks for the feedback! I must say I have no idea how this happened...Glad you experimented a little and managed to find the solution.
0
Categories
- All Categories
- 19 Welcome
- 1.4K Hangout
- 60 NI News
- 735 Tech Talks
- 3.9K Native Access
- 15.9K Komplete
- 1.9K Komplete General
- 4.1K Komplete Kontrol
- 5.5K Kontakt
- 1.5K Reaktor
- 364 Battery 4
- 817 Guitar Rig & FX
- 416 Massive X & Synths
- 1.2K Other Software & Hardware
- 5.5K Maschine
- 7K Traktor
- 7K Traktor Software & Hardware
- Check out everything you can do
- Create an account
- See member benefits
- Answer questions
- Ask the community
- See product news
- Connect with creators