-
How to ungroup Faders in Mix-View?
I have the following issue: In some of my groups I’m not able to move the faders in Mix-View independent from each other. For example when I want to move the fader for S1 also the faders of S2 to S16 are moving as if they are grouped. Does anyone know how to ungroup them? Thanks in advance. Paul
-
Maschine+. Battles lost with the microSD.
Hi everyone. Last March I purchased Maschine+ and immediately ran into a problem. When selecting available libraries, a list of 18 instruments or expansions or whatever appears, namely: Aquarius Earth, Bachyard Jams, Chromatic Fire, Deep Matter, Kontakt 8 Player, Kontakt Factory Selection 2, Lilac Glare, Maschine Central,…
-
Maschine software without hardware?
Hi, while this has been asked before I am finding no answers within a year and have been unreliably told NI options have changed and I need to make sure I get the correct current option. I have Komplete 26 Standard with its many Maschine expansions. If inexpensive, I'm interested in buying Maschine 3 software if NOT…
-
MIDI from Maschine + into Logic Pro recording issue
I bought the Maschine + a year ago and had a few head-achy weeks grappling with how it works - I am a Logic Pro user of over 20 years and I was told by a sales rep the Maschine system would be easy for me - it wasn't - my conclusion was it was overly complicated and illogical - so I put it to one side. Recently I installed…
-
Difference in standard between AD and DA converters on Maschine Plus.
I transferred digitally, nine sine waves from a computer to Maschine Plus: 20, 50, 100, 500, 1000, 5000, 10000, 15000, 20000 Hz. I played these through the output and recorded them into Izotope RX 7 via an Antelope interface. The recorded sine waves were identical to the original sine waves. However recording the same sine…
-
Maschine Mikro MK3 - screen not working
Hello, I recently bought a used Maschine Mikro MK3, the seller is a friend of mine and I even used that specific Maschine in the past, so I knew it worked. Since he didn't used it in months I bought it, he made the license transfer and everything, I downloaded all the software and firmware updates and everything works just…
-
Project and Group management on the M+
Does anyone have any tips or best practices for managing Projects and Groups within the Maschine+ standalone? Specifically, can you tag different groups/projects or save them in subfolders on the SD card? For projects, it's a pain to scroll through the full list of projects without any other information (e.g. create date,…
-
how to get daw to recognize drum pad instead of keyboard pad
is there an xml drum map that your daw can load? my midi track is only taking in the keyboard mode of my mikro maschine. do i need to take a class on the control editor? i’ve been fiddling to no avail. i can make a drum map in my DAW but don’t know how assign the buttons to it. i have a soft synth that notices the mikro…
-
Machine capture individual group midi to ableton sequencer
Hi Folks, as the title suggests, i am looking to integrate Maschine in to Ableton so i can capture individual Maschine groups to their own midi tracks in Ableton. i am also a long time cubase user, and have that set up following Jef Gibons excellent tutorials on how to do that in cubase. i am hoping to achieve much the…
-
Who you gonna call? Ghostbusters! (Maschine MK3 ghost knobs Fix)
I bought my Maschine MK3 when it first came out, and for years I couldn't solve the infamous "ghost knobs" issue... random parameter changes, settings moving on their own, and occasionally pads lighting up for no apparent reason. Online, and even here, a lot of people suggest checking your USB cables, power supply, or the…
-
Corrupted library path
Hi , had recently started my M3 SW and had a problem to load a group kit cause it couldn´t find the samples . So i rescaned my whole library , stayed same. So i tought ok just 1 Kit but then whole expansions got other paths in the missing library path … I allready reinstalled a few expansions but the issue stayed the same…
-
Maschine+ does not properly "save with samples"
I'm using the hardware M+ standalone. I have had issues since upgrading to Version 3, and now I cannot 'save with samples' properly. I usually save projects, with samples - and then load the SD card into my computer to make backups of my projects, however I was working on a project the past two days, and when I looked at…
-
File Name Bug
I’ve noticed a bug when saving projects in Maschine. Every time I save a new version of a project that’s already been saved, the file name ends up stacking extra extensions. For example, my current project file is named: beat v7.mxprj.mxprj.mxprj.mxprj.mxprj.mxprj.mxprj instead of just beat v7.mxprj. On a related note, it…
-
Maschine 3 interface is too dark and hard to read
Hi, I recently upgraded to Maschine 3 and I find the new interface much harder to read than Maschine 2. The overall design is extremely dark, with too much black and not enough contrast in some areas. After a while, it becomes visually tiring and uncomfortable to use, especially during longer sessions. Maschine 2 had a…
-
REQ: Piano roll feature in Maschine 3
Hello, Just want to ask if in future update you could add a piano roll feature like FL studio where you can see each midi layer on top of each other for different tracks or if not then be able to colour specific midi in the track, I like to see what the song sounds like all in one octave so begin able to put all midi in…
-
Playing Maschine kit with MIDI like it was a VST (latency)
I have serious latency when I try to play along to tracks with drum kits in Maschine software using the controller. This latency is irregardless of audio interface settings; when I use a different drum VST and MIDI mode, I get very little latency. So, how can I load the kit in Maschine and achieve actual low latency on…
-
Need assistance setting up Maschina 2
Hello, I recently purchased a second hand Maschina MK3 from guitar center. It. did not come with a license transfer. I have already had Komplete 12 for some time now. I hav tried downlaoding the software for maschina 2 but, it only gives me the demo option. When I click "buy" it takes me to purchase Maschina 3. Can anyone…
-
Maschine Mikro mk3 Arpeggiator Octaves
I recently upgraded from my Mikro Mk2 to a Mikro Mk3 and, for the life of me, cannot figure out how to add octaves in the arpeggiator section. Does anyone know how to access this feature? Thanks.
-
8 weeks+ & no reply for approved RMA - Maschine MK3 repair escalation
Hi Native Instruments team, I’m posting here because my Maschine MK3 hardware repair / warranty service case has been open for a very long time and I still do not have a clear repair status, replacement decision, return tracking number, or estimated return date. This is not an order issue. This is an existing hardware…
-
How can I activate my Maschine Mikro MK3?
I need Native Access to authorize my new device. I'm not the original owner, so my serial number was previously registered. Please help somebody?
