-
Bought a renewed maschine can’t register
has anyone had this issue I bought a renewed maschine + and it says the item is registered and I can’t register it. Anyone no how long it will take NI to resolve this issue?
-
LineInput Sample Monitor volume low, replays wrong speed and normalize no effect
Hi guys, I just have the MaschinePlus for one week and updated its OS and its firmware. Symptom: connect via Lighting adapter an iPhone6, play sound in iPhone. Opened Sampling. Jacked up the input level in "Channel" to +10dB". Still, monitoring very quiet, nearly not audible. Can record at threshold -55dB (not good …) and…
-
Maschine+ and Traktor Pro 3 Synchronisation
I am attempting to integrate Maschine+ with Traktor (S4MK3) and I'm running into some Issues. I would like the Maschine+ to sync with the master tempo of Traktor, which I currently have working but I am unable to play scenes on the M+. I have it setup currently: Audio from M+ to S4 Deck C Midi: Generic Midi device to M+…
-
External hardware midi sequencer is glitching the M+ out when REC is enabled
Hi everyone, Back again for more of the same. I'm using a Polyend Tracker as the master sequencer for all my gear. I've got everything running well and as it seems it should on the Maschine+ only for one issue. I think the best way to explain this is thru an illustration: I have Group B set to receive MIDI channel 2 and…
-
How to loop sample to infinity without holding the pad
Good evening, I have recently bought the Maschine+ and it works great. I just cannot find one thing, that is important to me. I want to import sample, then press pad with this sample and it should loop to infinity, without holding the pad. When I set the sample as One-shot, it cannot be looped. When ADSR, I have to hold…
-
Maschine + Question
If i go to settings, choose MIDI then it show me the first popup menu and it stays all the time, or if i change parameter in another popup, after this, the first popup menu is opening and never closed. Is this a software fehler OR is a disconnection in the Hardware (for example the data cable, it can be, that one of this…
-
Is it possible to make a pattern less than 1 bar long?
I would like to make patterns that can create polymeters where one track repeats at a differing length from another.
-
How to keep the chord sets visible on the right display of Maschine+ after switching on Note Repeat?
Does anybody know here a way to keep the chord sets visible on the right display of Maschine+ (or possibly Maschine MK3) after switching on Note Repeat/Arp? (In chord mode) When I’m using it it switches to a kind of event view, and I can no longer tell which pad represents which chord set without taking a picture or…
-
Is it possible to record a hybrid set : the dj part from traktor pro 3 and the live part (maschine+)
hi everyone ! I saw that it was possible to do a dj set with traktor pro 3 + controller and a live performance with maschine + (with maschine + plugged to maschine software) So i was wondering if it was possible to record both the dj set and live set in one audio file ? Tell me if I’m not clear :)
-
How to export MIDI of a pattern in stand alone mode?
Hi, I'd like to export the MIDI of the patterns I created. I'm using Maschine+ in standalone mode. I tried the File → Export option, but all I get is the option to export audio. Is it even possible to export MIDI of patterns if standalone mode? If not, anyone know how I can export my patterns as MIDI? Thank you.
-
no more connection to my MiniFreak Synth via Midi (USB)
I have Maschine MK3 and Komplete Kontrol S61 MK2 and an Arturia MiniFreak Synth all connected via Midi/USB to my PC (Surface Studio). Until now, everything worked fine: Midi-Out (Group H, Pad 1, where I have the MiniFreak V loaded) was set to 'MiniFreak' Channel 1, MiniFreak listens on cnannel 1. Audio Out from MiniFreak…
-
Maschine 3 not working with Pro Tools
I have the most recent version of Maschine (3 I suppose?) At any rate, I can not get it to record midi in Pro Tools. I have gone back and deleted the 5 weird plug ins from my Avid Audio folder, no luck. I can hear it as a hardware insert, I can hear it as a plug in. I just can not record midi at all. I can record one track…
-
Maschine does not allow play
When I start Maschine the green "green play" button does not light or is available on the software. Can anyone assist?
-
why are the expansions in my native access not moving to my maschine plus?
why are the expansions in my native access not moving to my maschine plus?
-
Is there anyway to record the MIDI notes from pattern switches?
If i have a number of patterns in one particular group, and I'm switching between patterns to make a more complex loop, is there anyway to capture those MIDI notes either in my DAW (Protools) or possibly record that 'performance' into another pattern?? It would be so hard/complex to program what I can easily accomplish by…
-
Scanning on startup getting stuck on FL Studio vst plugin
Does this happen to anyone else. This has been the case for many updates and releases. Happens with one other plugin but I was wondering if anyone else had this issue with the FL plugin. I have to go into the task manager (W11) and end the scanapp instances, usually multiple times Thanks
-
Playhead on Maschine Mk3 despite using all possible solutions will not Move
as itemised in the discussion title my playhead on maschine mk3 hardware using the Shift+4D Encoder will not move the playhead in the Events Window. This essentially compels me to use the software and i don't want to continue doing this. I've tried a million tutorials, am writing NI if i can get through and of course…
-
Things we wished we had better understood when first using Maschine.
still very much new and learning but … For me, I wish I had seen/understood- in an all caps, blazing, etched into my retinas font- these sentences: EACH PAD CAN HAVE IT'S OWN, INDIVIDUAL AUDIO/MIDI SETTINGS AND ROUTINGS AS CAN EACH GROUP CAN HAVE ITS OWN, INDIVIDUAL AUDIO/MIDI SETTINGS AND ROUTINGS This would have helped…
-
Maschine + Update when i turn it on (Maschineplus)
When i turn my maschine + on, this messages appears but when i do update, it doesn't find the update, any options? cause i can't use my M+…
-
Maschine MKll not responding AS in DEAD
Who is the fxxxxxx dxxxhead in charge of this company!? It is absolute impossible to find a way to get any kind of contact and help from thNI. Does it still exist. I NEED HELP and dont want to spend half my life figuring out wich way some screwed up mind constructed to get there. This was the kind request for assistance.…