-
Ending software support for some earlier generations of Maschine
We want to let you know that Native Instruments will soon be ending software support for Maschine MK1, Maschine MK2, Maschine Mikro MK1, and Maschine Mikro MK2. (Maschine Jam, Studio, Mikro MK3, MK3 and Plus are still supported). As is often the case with older hardware, we are at a stage with these Maschine products where…
-
How Do You Turn Down “Pre hear” on M+
when I’m browsing sounds whether stock or user the sounds are very loud! I know we have and option to turn it on/off but I’d just like to be able to turn it down lol We can also adjust the level of the metronome in general settings.. but not “prehear”
-
Anybody bought second hand units and received user and password?
Hi! I'm thinking about purchasing a second hand Maschine Mikro Mk3. My friends have Maschine Mk3 with the v2 of the software, and I would like to have this for now (I know I can purchase the rest of the samples and instruments apart to get the same with Mikro than with the normal version). However, I'm sure that most of…
-
Getting the Maschine 3 software recognized?
Was instructed to purchase new software to support my MK3, after purchasing the Maschine software does not appear onto my MK3 screen. Prior to using this software it was on screen. Do I have to load the unit if it is already on my computer hard drive and Maschine software available??
-
the challenges of sunlight on your maschine devices.....
some here on the NI forums may have considered taking there midi gear outside, along with a set of speakers etc and blast their neighbours with the cacophony of noise we tend to create… one of the overlooked aspects is the sunlight and how it can affect your visual feedback of your maschine device… albeit the LED feedback…
-
Is it possible to set the button backlight to always on?
Does anyone know if it’s possible to set the backlights on the buttons to always on (or brighter)? I can’t find anything in the settings. I have the Vapor Grey M+ which has white buttons and it’s really hard to see the text on them (also white) when not lit. The text on the pads is also off white and pretty much illegible.…
-
Any future plans to support all Komplete content on Maschine+ ?
Hello, I have Komplete 14 (Standard), and am deciding between MPC One+ and Maschine+. A deal maker would be, if there are any at least rumors that all Komplete content will be supported in the future on Maschine+, not just the limited subset, which is available currently. I would like to be able to use all Kontakt…
-
Maschine software display
How come i cannot fully adjust the vertical scrolling divider between the pattern view and the piano roll. I want to be able to fully adjust to see only the pattern/scene view of my tracks fully. Especially when i have more then 8 tracks i cannot view all the patterns at once when arranging. Also would like to only view…
-
LCD screen issue
A new issue has just started with my Maschine MK2, the LCD screens are lighting up but no text is showing up. I haven't done any SW updates / OS updates. the issue started out of nowhere. The screens light up but no text. I read a similar thread on here and went through all the suggestions but no luck. Please help?
-
How to send MIDI from MK3's external port while in VST mode
I want to use the MK3 and the Maschine 2 software as a VST inside of Ableton Live 12 to act essentially as a generic midi keyboard since the pad responsiveness in controller mode is garbage. I don't have any need to control Live with the MK3, I just want to use it to trigger midi notes for virtual and hardware synths I…
-
Maschine Plus stuck during the live show
This week i played live with M+, only wav audio stems and only internal audio effects, without any vsts, but anyway right in the middle M+ just freeze. Before the live, during soundcheck i was showing M+ to friends its capabilities, and loading FM8 and massive on the second group, but obiviosly i deleted all that unwanted…
-
Just purchased Mikro Mk3 but native access only offering maschine 2
The subject says it all. i say a few months back there was finally new maschine 3 software. I was a first edition maschine MK1 buyer back in the day, I liked it a lot for a while, but by time I also purchased maschine 2 software I felt like the old hardware was not well integrated, and the install of the software was not…
-
Maschine plus and external Midi
maschine plus slows external midi device down when keys are played. I connect with SP404 MK2. I tried midi cable and usb connections and both have the same unwanted result. Is there a way to fix this?
-
CustomMaschineMK3 - An open source Ableton MIDI Remote Script for Maschine MK3
Hi everyone. This is quick introduction of my custom MIDI Remote Script. Motivation Of course you know, We already have MIDI Remote Script for Maschine MK3. I couldn't satisfied with these because of lack of features or experience of use. Then I decided making better one from scratch. Current status Script development is…
-
Feature Requests Regarding Automation and Macros in Maschine 3
Dear Native Instruments Support Team, I hope this message finds you well. I would like to inquire about potential updates to Maschine 3 regarding automation and macros. Specifically: 1. Automation Curves Are there any plans to implement automation curves, such as drawing lines between points, adjusting curve shapes,…
-
Way can't I see Machine SW in Native Access after adding a serial number?
Hi. I bought a Machine Micro MK3 controller that was shown as B-Stock on Reverb. I created an account at native instruments.com, downloaded Native Access for Mac silicon, added my serial number and see it in my account properly. In the Native access library I only see the Kontact/Reaktor Player apps and Controller Editor…
-
Maschine Plus wont update (Update loop)
Hello, i tried to update maschine+ to the newest update. It updated and started, then i tried to load in a instrument while downloading the new fx and then it shut down. Now everytime i try to start maschine+ in standalone modus m+ tells me "There is an update", i can update, shutdown or restart maschine, when i press…
-
Maschine+ Power Bank guide
Hi. Power bank info is scattered around a lot so consolidating all info in one thread might help new M+ users. I'll only cover the PD Option so this guide doesn't get huge, other options are in Post #2. This is not an official NI guide, just my findings and recommendations. If there are any mistakes or suggestions let me…
-
Lost Hardware Serial
Hello, I bought a sencond hand Maschine MK3 without serial, i only knows device id. Support cant reachable 3 days ago. How can i get my hardware serial from device id? Support can help?
-
Machine Plus stuck after update
Hi, Just received a wireless update to Maschine Plus firmware. Updated. But unfortunately I’ve been seeing a “Maschine+ is restating” logo for about an hour. I think it’s a bad idea to plug it out or manually turn it off after updating. But what else should I do?
-
Maschine Software Will Not Show Up In Native Access
Hello Native Instruments! I'm looking for some help with my new Maschine Mikro MK3. I just received my new gear today and al registration of the Maschine seemed to work fine in Native Access, except the Maschine software. It wont show up in the NOT INSTALLED part of Native Access. I've tried uninstalling/reinstalling…