-
Supported Cables & Ports
The usb-c cable that comes in the box with the Komplete Kontrol Mk3 is too short for my studio set up. I have a 16 ft usb-c/thunderbolt cable that I can cleanly route behind my equipment out of the way of my mic stand. Unfortunately it will power my keyboard but it will not connect. (Yes I am using the host port and not…
-
Kontrol S61 MK3 Not turning on
Kontrol S61 MK3 is not turning on since this morning. I was using it attached to computer directly. I then plugged it to outlet too but still it isn't turning on.
-
Feature Request - Komplete Kontrol Keyboard
Feature request for the next Komplete Kontrol MK4 (or future models): it would be great to have the sliders positioned on the top section of the keyboard, like many other MIDI controllers. This would not only improve ergonomics and workflow, especially during live performances or detailed editing, but also significantly…
-
Komplete m32 is no longer recognized by my DAW
Cubase suddenly no longer recognizes my Komplete 32 keyboard. The trigger was opening Kontakt 8 in standalone mode and configuring my keyboard on Port A. Since my Komplete 32 no longer works on Cubase, I have to reconfigure everything via the midi remote, I don’t understand.
-
Where is NRPN?
Seriously, why is there still no NRPN on this $850 midi controller? Not only is that standard these days, I have 20 year old m audio controllers that can do this. Even older NI units do this. Why is this being left out? Tons of synths and other midi devices need it to be controlled. If you have banks of presets, you most…
-
Control S-88 MK3 disconnects from Logic when pressing DAW button (firmware 2.0.4)
Hi — I need some help with a connectivity issue after recent updates. Setup Logic Pro 11.2.2 macOS on Mac Studio (14.7) Komplete Kontrol / Komplete Kontrol Control S-88 MK3 on firmware 2.0.4 Hardware Connection Service 2.0.6 Problem Since updating both the Hardware Connection Service and the Control S-88 firmware, whenever…
-
Kontrol S49 MKIII stuck in Default MIDI Template
Forgive me but I'm pretty new to NI. I updated the firmware to the latest one and I double checked it updated okay but now I'm stuck on it saying Default MIDI Template. What do I do? Am I doing something wrong?
-
Send events to Kontrol from GigPerformer to Load Templates
In gig performer I can send cc events, program/bank changes, is there any way of triggering the kontrol keyboard to load on board templates I've created. I.e I switch rackspace on gig performer, and it trigger Kontrol to load a specific template. Apparently this was possible for the MKII keyboard
-
Do 3rd party NKS keyboards map correctly to NI Instrument controls if using Mackie HUI in a DAW
I want to buy a Novation Launchkey 37 (best size and functionality for my setup) but I am using Presonus Studio One which does not have a dedicated script for connecting this keyboard which means I would have to use the generic Mackie HUI protocol. Does anyone know whether the knobs on the keyboard will still map to the…
-
Keyboard mapping issue
I have the KOMPLETE KONTROL M32, and I would like to know if I can modify the keyboard mapping to trigger instrument effects originally assigned to keys outside the range of my 32 available keys on the controller. Thank you!
-
Can't (Kan't) see Kontakt Expansions In Komplete Kontrol
Hi everyone, Now, I've been making music with computers for decades, but I'm fairly new to Native instruments. Purchased Complete15 a little while ago and I'm really struggling to get to grips with finding content. At the moment I'm loading everything through Komplete Kontrol. I want to use this so I can utilise my S-88…
-
How to connect kontrol s61 to mac
I purchased a KONTROL S61, I'm trying to install the midi keyboard with my mac. The Kontrol MK5 Update is giving a error message. Help
-
Why Is My Controller Not Detected?
I've had my Komplete Kontrol M32 for about 2 years now, and it worked completely fine until I connected another MIDI keyboard (a roland eo-760 with midi to usb cable) when the screen didn't turn on anymore, driver installers don't recognise it, my computer doesn't recognise it's connected, Driver Services are running, i've…
-
Keyboard not turning o
49 key. No
-
Modwheel makes clicky sound S49 mk3
I recently bought a new S49 mk3. I really love it so far and it works 100%. However I noticed that when moving the modwheel up and down, I can hear a tiny clicky sound that is barely audible. I was just wondering if this is normal behaviour and if some sort of switch is being triggered. Thanks for your help!
-
Komplete Kontrol S88 Mk3 unable to update and unusable
My keyboard is unable to be updated. When I unzip the updater file and run the application, the keyboard tries to restart but INSTANTLY shows "Looks like something went wrong" and "Please re-run the update on your computer". Of course, I've tried it multiple times already. I restarted my keyboard, my PC, un-plugged and…
-
Failed Install of Products in Native Access
I just purchased an S88 MK3 and the Komplete 15 Ultimate bundle. Native Access fails to install certain Products, with the error citing disk access. I have confirmed that the Daemon, all agents, and apps have full disk access. The suggested workaround to install on the internal SSD and then move to the external caused an…
-
No sound
hi s61 is registering in logic but i get no sound . Playback works though and clicking notes in piano roll What is wrong? Thanks
-
Komplete Kontrol S61 MK3 Kontakt & Komplete Kontrol Issues
Hi, just out of the blue: Both Kontakt and Komplete Kontrol software link to my keyboard does not work any more. When either programm open no info does come up on the display. Strangely though: Both in Bitwig and Ableton the display features can be used. Set-up: Windows 11 NI: Both softwares are updated Firmware: 2.04 (can…
-
Konplete Kontrol Template - Pitch Bend / Sustain Pedal MIDI Channel
I asked this question a couple of years ago, and I've found a number of posts from users with the same questions; I'm wondering if there has been an update? Is the Sustain Pedal and Pitch Bend MIDI Channel still set globally for "all" templates? It really is causing me real problems, it seems like it would be such and easy…
