z1 mk2 not working with traktor 4, any tips?

2»

Answers

  • Victorcosta
    Victorcosta Member Posts: 7 Newcomer
    edited January 26

    yes, updated. 0.2.9

  • Sunborn
    Sunborn NKS User Library Mod Posts: 3,638 mod
    https://community.native-instruments.com/discussion/comment/206661#Comment_206661

    This is the firmware, i was actually talking about the driver (the last of the 3 links)

  • Victorcosta
    Victorcosta Member Posts: 7 Newcomer
    edited January 26

    I have a kettle, I downloaded it but I don’t know how to install it, is it really needed for ios

  • Victorcosta
    Victorcosta Member Posts: 7 Newcomer 
    I'm writing from a translator, so there may be mistakes
  • Victorcosta
    Victorcosta Member Posts: 7 Newcomer

    you definitely need to download traktor via native access and there will be happiness

  • ch4rl33
    ch4rl33 Member Posts: 1 Newcomer

    Any actual manufacturer fixes or updates? Just got a Z1 Mk2 and have a similar problem with Traktor Pro 4. Seems kinda dumb considering this piece of hardware is made to work with this software and the issue persists yet. I did what someone else suggested, and it worked:

    • open up Traktor Pro 3
    • set “Audio Device” to Traktor Z1 MK2 ASIO Driver (ASIO)
    • close Traktor Pro 3
    • open Traktor Pro 4 and device settings automatically import and immediately work

    The other Z1 WASAPI devices also worked but did not have Headphones L/R and Main L/R outputs available to select in “Output Routing” tab, only Speakers L/R. Interestingly, if you don’t open Traktor Pro 3 and go straight to 4 and try to select the same “Audio Device” as above, it doesn’t recognize it and shows a red banner at the bottom telling you to connect an audio device.

  • Carsten1972
    Carsten1972 Member Posts: 2 Newcomer
    Screenshot 2025-05-06 223808.png

    i can`t change anything in the output routing and i cant use traktor.

  • Carsten1972
    Carsten1972 Member Posts: 2 Newcomer

    the only thing that works is the Realtek Audio but its not going in the mixer only on my laptop.

  • lord-carlos
    lord-carlos Member Posts: 4,088 Expert
    https://community.native-instruments.com/discussion/comment/225075#Comment_225075

    Seems like that is still the wasapi driver, just with asio in the name. Odd. Do you have another drive with Z1 mk2 (asio) that you can select?

  • BJQ1972
    BJQ1972 Member Posts: 173 Advisor
    https://community.native-instruments.com/discussion/comment/225076#Comment_225076

    The driver you have selected isn't correct. Have you installed the correct ASIO driver from the Downloads page on the NI website?

  • Sunborn
    Sunborn NKS User Library Mod Posts: 3,638 mod
    https://community.native-instruments.com/discussion/comment/225075#Comment_225075

    As already mentioned above, you are using the wrong driver.

    This is the one you need:

    εικόνα.png

    The ASIO setup is already in your system, at:

    C:\Program Files\Native Instruments\Traktor Pro 4\Drivers

    Just run the setup from there, no need to download again from NI.

Back To Top

Categories