Skip to content
    • Please note that we've been made aware of a scam involving someone impersonating Native Instruments.
    Read our community note - here.

    I would like to setup a pedal for the MK 3 Keyboard for sostenuto

    Member Posts: 4 Newcomer
    in Komplete Kontrol

    Hi,

    I´m new with the Kontrol S88 MK3. I would like to add a second pedal with the cc midi-controller 65 (Sostenuto). But somehow it doesn`t work. Can anybody help me, to make the right settings in the Keyboard? thanks

    Welcome!

    It looks like you're new here. Sign in or register to get started.
    LOGIN / REGISTER

    Best Answer

    • Member Posts: 4 Newcomer
      edited 1:58PM Answer ✓

      Dear Uwe303,
      Thank you very much for your help. Everything is working. However, I had to set the correct CC Controller 66 (not 65). Now everything is ok. Thank you very much for your help.
      Yours sincerely
      Squeezeboxt

    Answers

    • Moderator Posts: 4,471 mod

      Hello,

      what have you tried so far, normally you set it up like the sustain pedal you just set cc65. What model do you use and what settings have you made? Have you tried a midi monitor to see if cc65 is working?

    • Member Posts: 4 Newcomer

      Yes and my pedal works as sustain pedal on the sustain port perfectly. The question here is the sustain pedal has on page 2 CC64 0 -127 and on page 3 CC 65 0-127.

      but when i try to set up on output 3 from the keyboard the sostenuto CC 65 0-127 on page 2 what do I have to set up on page 3 (cc65 0-127 doesn`t work)?

    • Moderator Posts: 4,471 mod
      edited March 31

      On page 3 setup something unused like midi cc14,15 on both third pages (from both pedals), for the ring. If I'm later back home I can try. And I guess your pedals are both the same, switch type pedals.

    • Member Posts: 4 Newcomer

      yeah your are right. I‘m using switch pedals for sustain and hopefully for sostenuto.

    • Moderator Posts: 4,471 mod

      Then just set tip up like you have said, and ring to cc14/15 (unused), and it should work. What exact model(s) do you use?

    • Member Posts: 4 Newcomer
      edited 1:58PM Answer ✓

      Dear Uwe303,
      Thank you very much for your help. Everything is working. However, I had to set the correct CC Controller 66 (not 65). Now everything is ok. Thank you very much for your help.
      Yours sincerely
      Squeezeboxt

    • Moderator Posts: 4,471 mod

      Yes of course 65 is portamento - that I didn't see that - but good that you found out and that everything is working now

    Welcome!

    It looks like you're new here. Sign in or register to get started.
    LOGIN / REGISTER
    Back To Top

    Welcome!

    It looks like you're new here. Sign in or register to get started.
    LOGIN / REGISTER

    Quick Links

    Categories