Skip to content

    • Connect Mc707 to Maschine+ via MIDI cable

    Member Posts: 34 Member
    in Maschine

    Hello, I'm having problems connecting my Maschine+ to the Roland MC707 using a midi cable. I don't want to use a USB cable because of midi clock sync problems. I'm still fairly new to this and I just can't get the two devices to communicate with each other using a normal midi cable. Can you help me? What exactly do I have to set on both devices? The mc707 is immediately displayed in the midi settings using a USB. Not using a midi cable, for example. It would be great if you could help me. Many thanks. Alexander

    Welcome!

    It looks like you're new here. Sign in or register to get started.
    LOGIN / REGISTER

    Comments

    • Member Posts: 384 Guru
      edited November 2024
      https://community.native-instruments.com/discussion/38795/connect-mc707-to-maschine-via-midi-cable

      Try to change MIDI SYNC in MC 707 from AUTO to MIDI

      In 707 you have 4 sync options

      1. MIDI
      2. USB (you have probably this or AUTO setuped already that's why USB cable is working)
      3. AUTO
      4. INT (internal - no external sync enable)

      You need to change it to MIDI.

      This is link how to do it:

      https://cdn.competec.ch/documents2/8/3/3/199083338/199083338.pdf

      page 54:

      Zrzut ekranu 2024-11-19 132416.png

      💪

    • Member Posts: 2,369 Expert

      Note: Traditional MIDI connections (5 pin DIN cable) won't show you the names of connected devices. There's no communication like that. It will only show the in/out ports.

    • Member Posts: 825 Expert

      MIDI 2.0 will show device names even via DIN MIDI cables, unless I'm mistaken.. However, most if not all hardware out currently only supports MIDI 1.0

    • Member Posts: 34 Member

      Thank you! I will try this.

    • Member Posts: 34 Member

      Thanks for the help! It works really well, apart from a small amount of latency, which I then try to compensate for using a clock offset. So far, however, only in one direction. The MC 707 as a slave. However, based on my previous configuration with the Minilogue XD, for example, I would like to run the Maschine+ as a slave. Unfortunately, that hasn't worked yet. Since I only want to synchronize, I don't need to set a MIDI channel or anything like that, do I? It would be great if you could send me a few more tips. Thank you very much!

    • Member Posts: 34 Member

      OK, I think I've got it now. However, I've noticed that the machine's CPU is really busy. I get a crackling sound every now and then. And the bpm display flickers like crazy. Is that normal?

    Welcome!

    It looks like you're new here. Sign in or register to get started.
    LOGIN / REGISTER
    Back To Top

    Welcome!

    It looks like you're new here. Sign in or register to get started.
    LOGIN / REGISTER

    Quick Links

    Categories