S4 Mk 2 - Mapping - Mixer Fx on

Buh287
Buh287 Member Posts: 2 Newcomer
edited February 27 in Mapping Traktor

Hey People,

i mapped my Cue Button too a Mixer Fx on Button with the Controller Manager. It worked but if turn off the Mixer Fx it automatically switch fx on by moving the Knop. Anybody got a solution for that?


Tagged:

Best Answer

  • Sûlherokhh
    Sûlherokhh Member, Traktor Mapping Mod Posts: 1,661 mod
    Answer ✓

    That's the auto on/off function of the S4Mk2 firmware. When Traktor recognizes that the device is connected, any movement off the middle value of MixerFX/Filter will toggle it ON. Moving it to the middle indent (+/- 0%) will toggle it OFF.

    As long as you are using the S4Mk2 you have to get used to it. It's probably best if you don't bother with the manual toggle.

    S4Mk3 doesn't have this, i am happy to say.

Answers

  • Sûlherokhh
    Sûlherokhh Member, Traktor Mapping Mod Posts: 1,661 mod
    Answer ✓

    That's the auto on/off function of the S4Mk2 firmware. When Traktor recognizes that the device is connected, any movement off the middle value of MixerFX/Filter will toggle it ON. Moving it to the middle indent (+/- 0%) will toggle it OFF.

    As long as you are using the S4Mk2 you have to get used to it. It's probably best if you don't bother with the manual toggle.

    S4Mk3 doesn't have this, i am happy to say.

  • Buh287
    Buh287 Member Posts: 2 Newcomer

    So there is no chance. But anyways thanks Buddy

Back To Top