Mikro 1

Mackky45
Mackky45 Member Posts: 6 Newcomer
in Maschine

Hi having trouble getting the controller to boot.

Ithe original owner of the mikro

Updated driver check

Updated control editor

Plug via USB 3.0

Won't boot?

What am I doing wrong, hope someone can help. Never had this trouble before

Do I need to register it first before it recognizes my hardware to be able to boot what have I missed.

Everything is download now I've nothing left to download now. I'm very confused 🤔

Answers

  • PK The DJ
    PK The DJ Member Posts: 1,914 Expert

    Are you trying to use it with Maschine 3?

  • Mackky45
    Mackky45 Member Posts: 6 Newcomer

    No bud

    Mk 1 software with mk 1 hardware mikro

    Once I've installed the correct software driver.

    It doesn't pin the machine mikro symbol

    Like usual that's the odd thing it installs but no boot symbol to open program. Very strange.

    Windows 10 I 7 dell 7520.

    The only thing I haven't done is register the serial number. But I can't understand why that would effect the install then giving me access to boot the actual program I'm well confused 🤔 😕.

    Thanks for ur reply

  • Mackky45
    Mackky45 Member Posts: 6 Newcomer
    Screenshot_20241129-153024.png

    Im not getting the software after installing.

    I.e see pic. Really strange mate

  • Mackky45
    Mackky45 Member Posts: 6 Newcomer
    Screenshot_20241129-153311.png

    U know after Installing I should see the logo double click then boom open software but it's not on the computer anywhere like set up has failed but.. it say installing etc then complete.

    Lol 😂 wats happening hope that is a good explanation.

  • PK The DJ
    PK The DJ Member Posts: 1,914 Expert
    edited November 29

    I don't think you can install or register Maschine 1 any more due to it being a dinosaur. You have to register Maschine software now via Native Access, so you'll need Maschine 2 software.

    The Mikro Mk1 won't work with Maschine 3.

  • Mackky45
    Mackky45 Member Posts: 6 Newcomer

    Right so first delete previous installs of mk 1 setup off my computer

    1.register my serial via native access.( I've downloaded access already) But not the serial

    2 install mk2 software drivers?

    3. Install the mk 2 software controller

    Many many thanks for ur time bud really appreciate. Dying to lay some beats ATM been 6 years of no laptop, finally got the money to purchase a laptop . So greatly appreciated ur response. Can u just confirm my 1/2/3 steps are correct.

  • Mackky45
    Mackky45 Member Posts: 6 Newcomer

    So download and installed mk2 software it acknowledged the serial and also registered the serial on access.

    But still it won't complete the install and pin the upload machine icon for me to boot the program.

    I think it's the USB 3.0 as it's states it on FAQ on native. All mine are powered 3.0

    Igunna try it on a old desktop see if it sorts out cus I'm run out of options now..

    It must be the interference with 3.0/2.0

Back To Top

Categories