How do i get sound from my Maschine Mikro?

2»

Answers

  • Uwe303
    Uwe303 Moderator Posts: 4,214 mod

    You can use those outputs but they are not affected by the mix and volume knob on the front of the audio interface. If you have a stereo with it's own volume knob it's fine. But if you use active monitors you should use the main out, them you can use the volume knob on the behringer to control the volume. So the RCA outputs 1-2 directly output 1-2.set in the software.

  • Mark Oxley
    Mark Oxley Member Posts: 359 Pro
    edited July 2024

    If you're using the A or B RCA outs make sure the A/B monitor button on the front panel is selected to the appropriate output you're using.

  • MMM
    MMM Member Posts: 15 Member

    have done all suggestions still no sound!! WTH😡

  • MMM
    MMM Member Posts: 15 Member
    Answer ✓

    OK. now i have sound through headphones, but still not the speakers. WTH I'm definitely never going to forget this one when it gets figured out.

  • Uwe303
    Uwe303 Moderator Posts: 4,214 mod
    edited July 2024

    If you hear something through headphones what is the switch set to A or B (1-2 or 3-4). Maybe you describe the exact setup you have in detail with all connectors and where exactly you have connected everything. And are you sure that your monitors or your stereo work with that cable on that input?

  • Mark Oxley
    Mark Oxley Member Posts: 359 Pro

    Please confirm which outputs you're using on the audio interface and what those outputs are connected too?

  • MMM
    MMM Member Posts: 15 Member

    HOly Moly So sorry guys was mis reading the description of in and out puts. Total moron geeze louis. Thanks for reaching out everybody.

  • Uwe303
    Uwe303 Moderator Posts: 4,214 mod

    No problem things like that happen, most important is that it works now and you can have fun.

This discussion has been closed.
Back To Top