Route Maschine Plus line out -> Scarlett 4i4 Audio Interface -> Monitors & am getting no sound.

sayertindall

Any ideas? I don't want to have to plug and unplug my xlr → 1/4 every time i want to play in standalone mode.. Cannot for the life of me figure it.

Uwe303

Hello,

you open the focusrite control software, then you look for the output, lets say 1-2, nomally it is set to playback 1-2, means 1-2 from daw or any software goes out to 1-2. Now you click on "playback 1-2" and set it to "custom mix" then you can add your physical inputs and the daw inputs, everything you want to route to that output. My picture shows the older version of the mixer software for the 3rd gen, if you have the 4rth gen it is similar - please look in the manual under mixer.

Uwe303

Hello,

you open the focusrite control software, then you look for the output, lets say 1-2, nomally it is set to playback 1-2, means 1-2 from daw or any software goes out to 1-2. Now you click on "playback 1-2" and set it to "custom mix" then you can add your physical inputs and the daw inputs, everything you want to route to that output. My picture shows the older version of the mixer software for the 3rd gen, if you have the 4rth gen it is similar - please look in the manual under mixer.