From SD cards to hard drive

MistaMike
MistaMike Member Posts: 1 Newcomer
edited October 2024 in Maschine
I have a problem, I installed everything on the SD card that is attached to the maschine+, after installing all shots, groups, loops etc. it turned out that I no longer had room for SD cards. I bought an external hard drive and wanted to start working on 1 TB. the problem is that machine+ wants SD cards all the time because all the groups, loops, shots etc. were installed there. what should I do to bypass the SD card so that everything works on a 1TB permanent disk? I will add that I tried to copy the SD card to the hard drive but it didn't help

Comments

  • tetsuneko
    tetsuneko Member Posts: 807 Expert

    I'm afraid you need to use the SD card. Some functions of M+ require the use of the card (which has hidden partition/files/folders or whatever).

    I dont know how to sort out your problem. I personally use only a couple expansions so plenty of space on my SD card

  • ozon
    ozon Member Posts: 1,911 Expert

    All NI content must be installled on the SD card through the install process. There’s no other way.

    Get a good quality full size SD card. 512 GB should be sufficient for everything. My 256 GB has about 100 GB left and carries all M+ content, all Expansions included with KUCE 14 and a couple of GB custom samples.

This discussion has been closed.
Back To Top

Categories