-
I'm having an issue with the table framework (Video).
Here is an example of the issue. the table framwork is seemingly not loading new samples as fast as it should if the project is on the larger side of things. Has anyone ever had any issues with this before? Is there a way to manually work around this issue? Thanks.
-
Auto resize Reaktor ensemble to screen resolution
Hello 🙂 Is there a way to auto resize a Reaktor ensemble according to screen resolution? There are many ensembles (usually user-made ones) that are huge and while this is great on a desktop's big screen, it is a total mess of frustrating on a laptop. I couldn't find any solution online, so i ask here. Thanks in advance for…
-
Battling Cpu another scenario
After going crazy figuring this out I thought I'd pass it on. This module attaches to an XR gate the can shut down and envelope generator when it's output is 60 db down. The objective was to shut the envelope generator down when the release phase reached -60 db. Regardless of whether the input midi gate was on or off. As…
-
FFT Phase Vocoder crackling
Hey guys, Trying to morph two sounds by taking the FFT amplitudes of one and combining it with the Phases of another. I'm using the FFT Macros by Robin Davies and am using the phase vocoder within the EzFFT as a reference. The sound is there, however, there are very distinct crackles everywhere. Second half is what it…
-
Tell me about Reaktor Legacy modes.
Hi! I assume that Reaktor (4/5) Legacy modes exist because some Reaktor protocols and/or Primary modules have undergone changes since the olden days. If i would, hypothetically, want to incorporate something old and dusty that was built in R4 into an R6 project (with all the modern stuff), how would i get rid of Reaktor…
-
Oversampling a Channel Strip - questions about OS methods, placements and signal paths
Im building a channel strip and exploring oversampling for the EQ portion. Ive seen the best results so far using the Hermite 2x macros and the "cubic ILO" macros. They both seem to cut a certain amount of aliasing out in their own right (bear in mind im driving the hell out everything with FM and obscene amounts of gain…
-
Battling CPU
It seems the latch might be your best friend in turning off a module. As shown below I installed latches on all inputs except the reset. The clock for the module is turned of externally but without the front latches a lot of things were still active. It seems the latch cannot send out an event with it's clock stopped. So…
-
Why does the "SWITCH" retrigger gate inputs on envelope generators.
Any time the switch is used I get a blast of any notes that have been previously played and the keys have been released. I have 5 switches and regardless of which one is used this always happens. Any suggestions?
-
Whats the difference between linear and cubic interpolation?
I understand linear interpolation, it's basically just crossfading values in a set timing, but what is cubic interpolation and how does it differ? I've never gotten a good explanation of cubic interpolation, so please, take me to school on this subject.
-
8 step analog trigger sequencer, inspired by Doepfer A-155
I wanted to drop this here in case anyone has comments or suggestions for improvement for my entry A-155 Trigger Sequencer | Entry | Reaktor User Library (native-instruments.com). I will post description below. One question I have out of the gate is about interpolation. The bottom row sequences Audio inputs and can…
-
Orchestra of Noize
This one is Beethoven approved... Shosti aswell
-
This is sweet, found a way to reduce cpu when the envelope generator stops.
I took a look into and envelope generator "ahdsr" hoping to find a way to detect the end of the envelope and discovered the init. As soon as the release stage is finished the init changes states. Here's a way to tap it and shut off external oscillators etc. when the envelope is over. This is inside the env generator.…
-
Default output dB -2?
Hi, not sure about default Reaktor dB output amount. Here's a very basic ens, outputting 1.0: somethings like -2db? Which kind of default is that? Or i am missing somethings and there is some kind of attenuator somewhere? I'd like to put "0db", for fancy measurements. Thanks for your helps.
-
Audio Table doesn't play
Hi all, i'm trying (with any gate-on event) to play my "draw" custom audio table, this way: While I can clearly see the Ramp osc "playing", Audio Table is fixed at sample 0 (output the sample at that index). Where am I wrong? CV scaling? Thanks for any helps
-
2D panner
I've been doing some spatialization for video lately, so I decided it was a good moment to make a binaural(ish) panner. It doesn't try too hard to be realistic, but it's flexible enough to do silly things like this: That's meters. Look Andrew, I still hate the empire! (?)