Skip to content

    • s3 jogwheel behaviour?

    Member Posts: 32 Member
    in Traktor Software & Hardware

    Hi team my discussion got closed but I reset the device and this behaviour still persists. I may have accidentally pressed a combination to disable the jog wheels but I am certainly trying hard to re enable them. Let me know what to do- I tried holding down the job wheel and switching the decks but no change.

    thanks

    Welcome!

    It looks like you're new here. Sign in or register to get started.
    LOGIN / REGISTER

    Comments

    • Member, Traktor Mapping Mod Posts: 3,222 mod

      Tap (not hold) 'jog' button.

    • Member Posts: 32 Member

      Hey team - tapping the jog buttons - they light up blue when controlling the main deck - has no effect whatsoever..

    • Member, Traktor Mapping Mod Posts: 3,222 mod

      They should light up red when deactivating the platter touch, until you switch decks.

    • Member Posts: 32 Member

      nah just show blue when you click them, but regardless it does not effect the Jog wheel operation

    • Member, Traktor Mapping Mod Posts: 3,222 mod

      On both sides? Press it on the other side and check if a) it lights up red when active and b) pause on platter touch works or not.

    • Member Posts: 32 Member

      no the same behaviour on both sides - the unit was working as expected but now the jogs seem stuck on pitchbend.

    • Member Posts: 41 Helper

      Does the traktor midi indicator flash when you touch jog's metall top surface in vinyl mode?

    • Member Posts: 32 Member

      Yeh the midi lights up - the platter is pitch bending the track instead of scratching it when it's playing. When the track is not playing it works completely as you would expect scratching as normal

    • Member, Traktor Mapping Mod Posts: 3,222 mod
      https://community.native-instruments.com/discussion/comment/195206#Comment_195206

      If you want to test the platter surface, you have to be careful not to turn the platter. Otherwise traktor receives the turning signal and flashes in the top bar anyway. It sounds, like the touch function is broken. When paused, just turning (without touching the top) will scratch, so it works even if touch doesn't work.

    • Member Posts: 32 Member

      ok I will look closer and let you know

    • Member Posts: 32 Member

      so this is how it is - I just fired it up and got it all connected to try to check and now its working perfectly again?? Im not complaining but I would like to know what's going on! Thanks all and have a great day

    • Member Posts: 32 Member

      Worked it out! When you change the sound card while a track is running it gets locked!! (there is a yellow message for a moment)- you need to stop the track, change deck type and back again and back in business!

    Welcome!

    It looks like you're new here. Sign in or register to get started.
    LOGIN / REGISTER
    Back To Top

    Welcome!

    It looks like you're new here. Sign in or register to get started.
    LOGIN / REGISTER

    Quick Links

    Categories