Help! Maschine routing EVERYTHING to both main and cue

Zaiquiri
Zaiquiri Member Posts: 3 Newcomer
edited October 2024 in Maschine

All groups are sending to Master.

Master outs are set to Ext. 1.

Cue outs are set to Ext 2.

Audio prefs:

Out 1 L/R is set to Out 1/2.

Out 2 L/R is set to Out 3/4.

Master is out being sent to channels 1/2/3/4 on my MOTU M4.

Screenshot 2024-07-06 at 1.25.47 PM.png Screenshot 2024-07-06 at 1.24.44 PM.png Screenshot 2024-07-06 at 1.32.42 PM.png DSC00001.JPG

Best Answer

  • Uwe303
    Uwe303 Moderator Posts: 4,815 mod
    Answer ✓

    Hello,

    have you tried to create a new project with just 2 groups and does it then also happen. I only could recreate that with sends set to cue, cause if you use the cue button the signal then goes only through the cue channel.

Answers

  • Uwe303
    Uwe303 Moderator Posts: 4,815 mod
    Answer ✓

    Hello,

    have you tried to create a new project with just 2 groups and does it then also happen. I only could recreate that with sends set to cue, cause if you use the cue button the signal then goes only through the cue channel.

  • Zaiquiri
    Zaiquiri Member Posts: 3 Newcomer

    Actually, when I create a new project with two groups as suggested, it's working as it should. So is this project just screwed up somehow?

  • Uwe303
    Uwe303 Moderator Posts: 4,815 mod

    Have you checked all the sends, maybe first on group level then on pad/sound level?

This discussion has been closed.
Back To Top

Categories