-
Template for Logic?
I'm thinking about making the switch from Ableton to Logic but I use my Maschine Mikro MK2 as my midi controller in Ableton. Are there any templates available for logic?
-
Maschine 3 licence transfer (2025)
I'm running Komplete 12 Ultimate in 2025. I'm trying to sell my Maschine 3 hardware. KOMPLETE 12 SELECT for HW is "NOT TRANSFERABLE". because it's been replaced by other stuff. So do I just transfer the MASCHINE MK3 HW by itself or is there something else the buyer will need to get it working?
-
Accessibility Audio turned on?
every knob now has accessibility audio enabled and I don’t know how to turn it off. The manual shows using a separate desktop app to enable it, but that app isn’t running. This is happening both in Maschine desktop and Maschine VST. https://youtube.com/shorts/5xyqycSlWRk?si=ZGAflYRCKOMZSXUT
-
In need of Maschine 2 software license
Hey guys, I have just bought a maschine mk II in a great shape. Unfortunately the owner told me that he is not able to transfer the license to me. So, since Maschine 2 software is now deprecated and cannot be purchased from the NI website, I was wondering if anyone is willing to sell the license to me. I am also open to…
-
maschine mikro mk3 - playback, patterns, waveforms
a couple of questions…. if i have multiple patterns in a group, can i play them back concurrently? Also, is there a way of seeing the waveforms of all the patterns from different groups together during playback, as in a DAW? Aaand, if i have the maschine routed into Reaper, can I play a pattern in the maschine software and…
-
Any new Maschine hardware coming this year?
Sorry if this is off topic, but I'm curious if there might be new Maschine hardware coming? Seems quite awhile since a new unit has been seen. Peace.
-
How to stop Maschine3 software from sending the scene to the hardware while I audition
Hello, First post here. Forgive me if I am posting in the wrong section. I must be missing something here as Maschine 2 (Software) does not do this. I have installed Maschine 3 software. When I select groups and click on a kit to hear the audition, Maschine 3 immediately loads the scene and sends to the hardware and…
-
Hear the sound of the Browser
Hello, When I search sound in the browser and I want add it in my project, I turn the knob 8 to choose one but I can't hear the sound I choose…it is the first time I have this problem. Thanks for a answer Gilles RM
-
Disable clips
In song mode I would like to right click on this clip and disable it so it doesn't play back, just like I can with patterns in ideas mode. Am I correct in thinking this facility is not available in the latest version of Maschine? Only options I've got now is to move the clip somewhere else or delete it. Or perhaps move it…
-
License transfer and komplet select
Hi everyone, I recently transferred my maschine MK3 to his new owner. When i bought it it cames with komplete select 14. I thought komplete select would be transfered to… and it doesn't… is there a way to transfer it ? Thanks ! Fred
-
Maschine Plus update
I read that a promised update for the Maschine+ was expected in June. Does anyone have any more information about this?
-
Use expressive hardware (Touché or microfreak) in the Maschine+
It would be nice to have the press sensitive pad of the microfreak or the expressive e Touché, to link it to the 8 macro nobs of the Maschine plus. Or at least, map the mod strip for one a macro. Of use the aftertouch of the drum pads.
-
Nagivation to Pitch/ Envelope and Reverse
Hello Experts! I've been trying to follow the video tutorial for the MK3 and can't display the same settings to show Pitch/ Gate | Tune | Start | Reserve | Type. Under Sound, it instead shows Playback | Mode | Tune | Pitchbend on left screen and Audio Engine Source and Length on right screen. I've looked at the manual and…
-
Worn sticker/serial number replacement?
I have a Maschine Mikro Mk3 that has the sticker with the serial number/hardware ID mostly worn off. Is there a way for me to get a reprint of the sticker from NI or get the serial number through software? Lucky for me I took a photo of it that's mostly there but now it's much harder to read.
-
Piano Roll
Hi People, I was looking for the "Ableton midi note stretch", it means, if you write notes you can expand or reduce over the clip. Is it Maschine developed to do this? https://www.youtube.com/shorts/qpO3YpsFq4s
-
[FIXED] Maschine 3.1 - Full screen broken with DPI scaling
Full screen mode is broken in Maschine 3.1 when Windows has DPI scaling on. Size of the displayed Maschine is inversely proportional to the scaling: 200% DPI scaling = Maschine taking 1/2 screen width and height, 300% scaling = 1/3 etc. Tested in Win11 24H2 26100.3476 EDIT: This is fixed in 3.2
-
Is it possible to import Maschine 2 library to Maschine 3?
I have a lot of expansionsnd such in Maschine 2. In my Maschine 3 software there is nothing except one sound. Can I add my library to the new Maschine software?
-
How to access all Projects on the Maschine+ SD Card
I transferred the project from Maschine 2 to the sd card in Maschine plus. But standalone M+ doesn't see it. The project is working with sd, it opens in software
-
MacOS & ios users with maschine... YAM display... "yet another monitor" display
Maschine users who run their maschine application on macOS… might find the Yam display/air very useful you can run your MACOS computer completely headless, quite simple to setup… with ipad's or even an iphone if you wanted to… but it has some usefulness when using maschine or DAW's in general, given the touch aspect is…
-
Performance issues with Maschine+ and a small 3d-party library + questions
Hello, I just received a brand new Maschine+ and tried to play a 3d-party Kontakt library, but having issues with high CPU usage (70+ %) and audio drop-outs even at low polyphony - 2-3 notes played together. At higher polyphony it might clog the CPU totally. The library in question is "Deepflight 2" - sampled best Roland…
