About your ideas for Maschine 3
Comments
-
They don't talk specifically about external hardware; but this is your starting point:
You're simply going to setup the audio page in settings to have some I/O pointing at your hardware. Pick an empty pad to treat as a "return". The input should be the output from your hardware. Use one of the outputs to go into the input of your hardware.
Be careful if you have anything that adds a even a tiny bit of latency. Not a big deal if sending an entire track out. It becomes quite a big deal if trying to do parallel processing or even just trying to process a single "track" (sound, group, whatever).
1 -
I'm actually going through this now.
…and I noticed "locate product content" after doing it manually for A LOT of them. lol.
(that's the bottom left of the Native Access 2 screen)
For some reason it's not finding my expansions; but I'm in the middle of copying from my old drive to a new drive. Maybe it they just haven't completed. Will test shortly
0 -
Have you checked out Maschine Auto Tagger? It’s a 3rd party app that’s like $18 and it automatically tags huge folders of samples. I use it for tagging all my sample collections to use on my M+. It has an AI feature that does a pretty good job of predicting tag categories. Sometimes it won’t correctly label something as a loop so I usually sort by sample duration and manually fix those as needed.
3 -
A few ideas that I would like to see:
- A note repeat mode - Select a pad to enter into note repeat mode, each pad will trigger the selected sample with note repeat locked with different note division. For example, pad 1 original sample no repeat, pad 2 locked to 1/4 repeat, pad 3 locked to 1/18 repeat, pad 4 locked to 1/1/16 and so on. Include triplet divisions as well spread across all pads. Allow for the user to set up the divisions they want each pad to trigger. This would make it much quicker to create intricate patterns a la Illmind's Battery 3 workflow.
2. Convert midi patterns to 1/2 speed or 2x speed. This would make it easy to play a pattern created at 80bpm at 160bpm or vice versa.
3. In standalone, allow an option setting to play patterns at there original tempo when a tempo is specified in the pattens name. This would be great when auditioning expansion patterns
I didn't read all 12 of the pages so, I apologize for any repeats.
2 -
Maschine user since day one v1 (currently M+) and after like 12 years of posting for some sort of tempo/time signature change within projects, just want to say thanks for finally including this (in my opinion) basic functionality. I’m happy I now can at least do this per scenes as opposed to have to be slaved to an actual sequencer/daw to do this essential function for my live performance work. Now I feel I can completely ditch the laptop live when this makes it to the upcoming M+ update.
That said…I’m mostly concerned with the M+ updates continue to mirror the software features as much as possible.
Some features I’d like to see-
-also include time signature changes to per-scene tempo option M+/Software
-record tempo modulation
-Tagging within M+ standalone
-simple midi cc assignment for all knobs and faders with external midi controllers on M+. For instance hold shift+touch/turn knob brings up map to midi note or cc and wiggle knob on controller and done- like on most current Instrument apps and VSTs.
-Visual feedback for plugins on M+- ie gain reduction on a compressor, output level, RTA for eq, etc.
-allow 3rd party (and NI!) VSTs. Just like any computer system, I think it should be up to the user to determine if the cpu load, compatibility, reliability, etc. is acceptable. Don't know what the install process would look like but obviously would love the option.
-Guitar Rig for M+ (even a stripped down version if necessary)-tuner plugin for M+ would be especially useful and maybe a new M+ plugin every once in a blue moon would be nice (if 3rd party VSTs are off the table)
-Some streamlined process converting user Reaktor Ensembles to work in M+ (I’ve done a bunch and it’s a pain- if it works at all…I think Reaktor in M+ is a seriously overlooked hidden gem of M+.
-Would also be nice to have some options of the artwork when saving Reaktor ensembles on M+ like synth, effect, utility, etc- or custom jpg artwork. Done this (YouTube) on the software for 3rd party vsts. Not really a fan of the yellow default Reaktor synth pic it defaults to for everything.-Allow paid 3rd party Reaktor ensembles to be used in M+ (or just allow all Reaktor ensembles would be great) understand the potential cpu overloads, but like with 3rd party VSTs should be up to customer discretion.
-Ability to chose mono/stereo for sampler and channels in general (currently use stereo/mono Reaktor tool to workaround)-Ability to assign mono outputs or stereo pairs
-M+ standalone midi mode - shift+MIDI puts M+ in a fully standalone midi controller mode like with Controller Editor connected to computer for controlling hardware synths etc. no computer. Or ability to connect to computer with Controller Editor and make presets that can be stored on M+ internally and used standalone.
-Please don’t abandon Maschine Jam support on M+ moving forward!
M+ with Jam is great.9 -
If there was support for midi-only plugins (especially midi-only reaktor patches for m+ standalone), then everything from note-repeat to the wildest arpeggiators could be achieved by using midi plugins, everything on a per-pad level.
What would be cool an top is a function to render the output of a midi effect directly to events. So we could choose if we want to be able to adjust a recorded pattern by changing e.g. note repeat parameters afterwards (currently not possible), or to edit the resulting note events inside the editor (like with current internal note repeat / arp).
4 -
- Time Stretching
- Drum Machines(kick,clap etc)
- better jammability for live performances
- step based parameter locks
1 -
Drum Machines (called Drum Synths) and step based parameter locks are already available.
4 -
1. Synced Pattern Change (!)
2. Improve SAMPLER LFO and MOD:
- Easy Selecteable destinations (i.e. Shift + Knob = Changes destination)
- New possbible destinations: Volume, Decay, Sample Start, Loop start/end, etc.
- Increase rate range (for AM)2 -
But like many of M+ features its half baked:
1 -
Same problem here (i assume it appears to all).
It is a big problem for users like me who create tons of shelf-made material (samples etc).
Look here, some of the work i have done on Maschine 2, with me as vendor on the top, then material from other sources, all tagged and most of them with custom images:
Here is how they look on Maschine 3… awful… all the work is gone!
I have tried re-creation, double and triple folders in NI resources, re-scans…. nothing changes.
Product, Vendor, Author, Type etc. are correct, the info still exists inside the files:
Please fix this, or let us know how we can fix it. I think it's a small issue than can be fixed easily. 🙏0 -
I managed to fix this by taking my komplete.db3 file in the maschine 2 appdata folder (windows) and pasting it into maschine 3
1 -
If we got Massive New Default Sound with ability to change Wave Tables and Algorithm with encoders on Maschine 3.0 then it would be great to get more control over FM8& Massive together for Standalone Mode.
4 -
Lock States on linear Time Line in Standalone Mode is Amazing, it available in Controller MK3 mode too. You play them in keyboard mode, touch strip and placing them or recording.
Pro- Amazing Authentic Music
Con- you can Record stems in real time or record Master. It's working for me for more than 5 years.
0
Categories
- All Categories
- 19 Welcome
- 1.4K Hangout
- 60 NI News
- 724 Tech Talks
- 3.8K Native Access
- 15.6K Komplete
- 1.9K Komplete General
- 4.1K Komplete Kontrol
- 5.4K Kontakt
- 1.5K Reaktor
- 361 Battery 4
- 805 Guitar Rig & FX
- 410 Massive X & Synths
- 1.2K Other Software & Hardware
- 5.4K Maschine
- 6.9K Traktor
- 6.9K Traktor Software & Hardware
- Check out everything you can do
- Create an account
- See member benefits
- Answer questions
- Ask the community
- See product news
- Connect with creators