About your ideas for Maschine 3

1…89111314

Comments

  • Gray Sun
    Gray Sun Member Posts: 3 Member
    edited November 18

    Maschine 3 bug: The pin plugin feature that keeps a plugin open on the screen stops working once you minimize or close the plugin window. After reopening the plugin window, if you pin the plugin and then select another sound, group, or channel, or click outside of the plugin window, the plugin window closes.

  • AlphaCentori
    AlphaCentori Member Posts: 17 Member

    custom chord and more chord sets is what i want the most.

  • AlphaCentori
    AlphaCentori Member Posts: 17 Member

    plugin latency compensation also

  • DJZube
    DJZube Member Posts: 2 Member

    Much improved DAW integration for Ableton. Using them together is rather painful and has been for Maschine's lifetime. I often want to just use Maschine as a drum rack. And you can manually set that up, but it's still under-featured and not great to use consistently.

    Ability to have a drum rack that controls Maschine, supports routing, etc.
    Or a custom Ableton device that controls Maschine.
    Let me control/sequence it from Ableton, use the Push, etc.
    Browse/select sounds/kits from Ableton, bonus to drop samples from Ableton into Maschine for use on a pad.
    Use the "scroll grid" on the Ableton drum rack to move between Maschine banks (A-H)
    Ability to drive the drum rack from Maschine while in this mode (Maschine's pads are superior to those on the Push)
    Better default routing for audio for each channel coming from Maschine without having to set it up all the time.

  • Black Octopus
    Black Octopus Member Posts: 3 Member
    image.png

    Please add start / end / position / length settings for audio clips + ability to quantize audio.

  • Staykool
    Staykool Member Posts: 78 Helper
    edited November 18

    HI NI Team. Love the New Maschine 3 but there was a bug on one of my computers that require that I have to reinstall all 2.5 TB on content to a new hard drive.

    Please make it easier to reinstall content ALL AT ONCE when moving to a new drive.

    There is no way to get the individual items out of repair to install without clicking on every darn expansion one by one.

    PLEASE consider an unistall of all products. Now its taking me 2 days to reinstall everything when everything has been working perfectly for many years. Please review screenshot to see my pain.

    Thx

    Screenshot 2024-11-17 at 4.13.14 PM.png

  • Lowkus
    Lowkus Member Posts: 34 Helper
    edited November 18

    Still waiting for selection resizing to be added. Frankly, this should be added to Maschine v2 as well for those of us still running Mk1 and Mk2 hardware.

    image.png

    And here is some pseudo code to implement it (dragging from the rightmost item of the selected notes)…

    // Store the initial position for each note

    long initLeft = SelectedNotes[0].StartPosition;

    long initRight = SelectedNotes[SelectedNotes.size() - 1].StartPosition;

    long newRight = SelectedNotes[SelectedNotes.size() - 1].DragPosition; // The new position based on dragging

    // Calculate the width of the selection

    long existingWidth = initRight - initLeft;

    // Calculate the new width based on the cursor position (dragging from the right)

    long newWidth = newRight - initLeft;

    // Calculate the ratio of change in width (less than 1 for compression or greater than 1 for expansion)

    double ratioChg = static_cast<double>(newWidth) / existingWidth;

    // Loop through the selected notes to adjust their start position

    for (int i = 0; i < SelectedNotes.size(); ++i) { // Adjust the position based on compression/stretching

    SelectedNotes[i].StartPosition = initLeft + static_cast<long>((SelectedNotes[i].StartPosition - initLeft) * ratioChg);

    }

  • Rilkecat
    Rilkecat Member Posts: 56 Helper
    edited November 18

    Synced Pattern Change ! (as simple as that)

  • Bubson
    Bubson Member Posts: 2 Member

    I would like to see the click and hold to export button to have more functionality, as someone that always uses the machine plugin to then bounce out to the DAW most of the time. I find myself having to solo all of the separate parts just to bounce them out onto their own channels. Id like to be able to maybe shift click and hold to have the button bounce all used channels in all scenes as a batch in one drag to the DAW. Would improve workflow nicely.

  • Crackpot Castle
    Crackpot Castle Member Posts: 6 Member

    Hi, more midi channels please!

    Each group should have 16 dedicated midi channels. I use Maschine with Protools and it could potentially replace a scoring software such as Vienna ensemble Pro. The fact that all the major orchestral libraries are supported by NKS, and the Kontakt leadership in VSTs should logically take advantage of NI owns Maschine’s software architecture.

    I made several ochestral templates using maschine, and it is so convenient to be able to manipulate the parameters of every instruments via the MK3 or the KK2.

    It’s just a non-sens that it’s capped at 16 channels, so you have to load a new Maschine instance for every 16 channels.

    Also KK3 SUPPORT!!!!!!!

  • caDJun
    caDJun Member Posts: 2 Newcomer
    https://community.native-instruments.com/discussion/comment/189199#Comment_189199

    I love the Digitone. I had the OG and I just got the new one. It's great as a hardware piece of kit. However, I find FM8 to be way more comprehensive. The sound design on Digitone is smoother for people unfamiliar with FM synthesis though it is limited. FM8 is by far way deeper of a synth. Does it have the Elektron sequencer? No and that is a lot of the power of Elektron gear. But from a sound design aspect, FM8 is absolutely top notch. Is there something specific you're looking for that the FM8 doesn't offer?

  • janpeeters
    janpeeters Member Posts: 23 Member

    More Arp modes would be great. Especially random (long overdue). Or maybe even custom user patterns :-)

  • tempsperdu
    tempsperdu Member Posts: 425 Pro

    Sort out the beyond atrocious scanning that affects Maschine, NA2, Kontakt 7, Battery and Komplete Kontrol.

    Maschine like most other programmes used to do an initial scan and then only when a plugin was either introduced or updated do any further scanning, although it's always had a bug whereby others especially iZotope were rescanned at start up that NI seemingly decline to fix. Why does it now scan everything VST3 at startup to the detriment of users with a large amount of plugins, especially those that the scanning process has extreme difficulty with?.

    Give users the ability to adjust the new GUI for those that find it causing fatigue.

    Finally, make Automation usable and editable. Having an automation that exists more or less in name only and that is so firmly rooted in the 90s is insane for a company whose tag line is *cough*'The Future of Sound'

    Give users the option to have the legacy duplication option that got destroyed without thinking that it also destroyed very quick workflows that some users had been happily utilising for years.

    The current GUI, even with its debatable 'new clothes' is also like something from the 90s in its architecture which could benefit from being rethought with a focus on readability usability and adaptability. Not being able to view Ideas view and Arranger at the same time isn't exactly helpful.

  • Blasterbasterd
    Blasterbasterd Member Posts: 4 Member

    Please update the Sampler. We are begging for key detection ( you already have the code for this in your DJ software) as well as pitch change and not just tune.And better time stretching algorithms.

  • Tigersharc
    Tigersharc Member Posts: 73 Helper

    I'm not sure if this could be done on Maschine 2, but I would like to have the ability to route external hardware such as compressors and channels strips with Maschine. If this is possible already can someone point me to the page in the user manual. But essentially I would like to run hardware gear with Maschine 2/3

Back To Top

Categories