-
Can Reaktor or Kontakt run on an Ipad
A friend uses an Ipad in his band. He says there are a lot of samples out there that are pretty good. It has no midi input but is usb compliant and has a latency of about 3ms. He also says the android things have an unusable latency, like 30ms but not on Mac's Ipad. Just a guess but there are no drivers to load which may…
-
How to feed a Sine Bank Oscillator module with a Frequency Spectrum List With Partials
Hallo Reaktor users and programers. Thank you for your help. I am not very good programer but I am very happy working with Reaktor. I am trying to build a synth (with Sine Bank oscillator) that reads the spectral analysis from a given sound, or that you can feed with a text list with the spectral analysis information (…
-
Do IC Sends auto filter duplicates?
Title is the question... here is the situation. I've got a button set to trigger mode sending out a value of 1 everytime it is pressed, I have this one trigger set to trigger events in multiple locations, there were a lot of wires going all over the place, so I cleaned them up by using some IC sends. Now the trigger…
-
Custom GUI Skinning
I would like to add a very simple GUI skinned stacked macro selector that I made in Adobe Illustrator, and I think the multi picture might be the best option for it. It seems very daunting, and the image properties calls for a bitmap "that contains a number of pictures can be loaded. I have a very simple skin for my first…
-
Sampler with Randomize for sample selector.
Hey NI people! How can i build a sampler and make a randomize button to select loaded samples (sample selector) with no pitch change and no stretching?
-
SilverbirdLive vs LimeLite?
These beatbox / groovemaker ensembles have received a lot of love over the years. They appear to have many similarities. I'd welcome comparisons, strengths & weaknesses, and knowing which you prefer and why. Are there other ensembles we should add to the discussion? -d. vyd
-
Ideas for updating SilverbirdLive?
Hi everyone, I've been enjoying playing with SilverbirdLive. I notice that it uses less than 8% of my CPU when running all effects on all channels. Sometimes though, the sound seems muddy. This may be caused by the combination of samples and effects I happen to be using creating overlapping frequencies. But, I was…
-
Oscillator Pitch Input - Frequency to Note
Hello all, I'm a bit confused here. I have a simple Sine Osc that I'm wanting to control with exact frequencies. For example, I want the osc to output 200hz so with a fader/knob I dial in a value of 200. However the Pitch input for the osc says it is a logarithmic control for the frequency where 0 equals c2 or a frequency…
-
What do i send to Pitch for a standalone audio (ladder) filter?
I need to build a simple standalone Ladder Filter/LFO combo, because my DAW doesn't have one.This is for filtering audio tracks. What info do i send to the Pitch input of the Ladder Filter? Greets, Bolle
-
Different soundbanks for a sampler?
I'm still working on my first sampler/sample player and the most things are working fine so far.. Now, i thought it would be great to have more then 128 samples in my project, is there a way to change the samplebanks in the player itself??? Frank
-
Has anyone figured out a way to do BPM/Tempo detection of loops in Reaktor?
Title asks the question... I'm working on a beat slicer looper type system where I need to know the BPM of the original sample so I can use that to calculate some ratios that relate to playback speed and time. I don't know of anyway to make reaktor scan a sample on import and do tempo detection on the loop. I looked inside…
-
Thanks for the help with the FM12 project guys.
This was a two year long project. I couldn't have done it without the forum. Going to put it in the users library soon but wanted to ask for suggestions first. Basically it's the 50 year old FM synth with many improvements. I primarily use it to add missing sympathetic resonance to some sampled pianos when the sustain…
-
Copy paste macro
So I've got three multi-displays to use that get sent to my sine bank, an additive synth, and when I draw on them, they sound as they are supposed to. Are there any resources that teach about manipulating multi-displays? I would like to be able to copy/paste between multi-displays so I don't have to draw on each of them.…
-
Something is screwy with the library's shelving filter
Here's a file showing the frequency response of two filter types. The top is a cascaded 2 pole filter and the bottom is the libraries shelving filter. If you switch between lp and hp it's pretty obvious the slope is starting way to early. I'm assuming the Fc should be down about 3 or so db, but his looks way off. Am I…
-
Reaktor primary and core building private lessons
Hi :) Anyone who is interested in giving private lessons about building in primary and core?
-
Is there any way to contact Efflam Le Bivic here...
I tried to search him in the user directory but his name does not come up, so I don't think he has an account in the forum. I have some questions about his folds block and I wanted to talk to him about it, I know he is an NI employee and I think he used to be on the old forum but I can't find him on the new one here. Is…
-
Tempo sync a clock in core
I have this counter which counts from 0 to 1, it has a speed knob to change how long it takes to get to 1, which ranges from values 0 - 5. I would like to replace this knob with a 1/4 tempo-synced speed, what do I need to change?
-
Is there a module that does the opposite of a selector?
This macro is used to draw values on a table to make shapes that look like saws/sines/square etc. When you press the saw button, it draws a saw. The problem is I have the shape freq slider connected to every shape type, but I want it to only connect to the place in which the button was last placed. e.g. If I clicked the…
-
How can I do auto-portamento à la TB-303?
Hello! I'm building a replica of my Analogic TT-303 (a very accurate TB-303 clone) inside Reaktor, I've already built 5 or 6 custom synths from the ground up so I'm confident with most stuff but can't seem to crack the 'slide' portamento that the 303 does. For people who don't know: the 303 slide is much different to…
-
Randomizing parameters not working correctly!
Hello all, for my little 4 layer sampler project, i had the idea to build in a randomize button to choose different settings like samplestart, wavefile, tuning and much more. Of course, i randomize the filter. Everything is working except the filter for example. I have different filter like lowpass, hipass, bandpass,…