-
Who else would like to have more pickup choices for sample rates.
Assume all ensembles use 192k sample rate. It seems ideal to select divided down sample rates for different modules. In reality nothing really has to run at 192k, it's only a starting point for a master clock and clock dividers provided to us in the pickup menu. Have to admit it beats having to divide down a bunch of…
-
Reaktor 6 Primary Video Tutorials
Hi all, I'm sharing some videos I made for my classes for getting started in Reaktor 6 Primary, in case some folks here might find them useful: Just a warning, since I made these for my teaching, they might be a little pedantic for some since I spend a bunch of time on theory, but hopefully they can be of help for folks…
-
Building a multipoint mouse control?
I'm looking to build a multipoint mouse control, as in left click and drag on the left side to set a range start, left click and drag on the right side to set a range end and left click and drag in the middle to shift the whole range forward or backward. I've never made one of these before and I was hoping you guys would…
-
Just passing on a tip for newbies like myself with Reaktor 6 and Reaktor 5 manuals.
Last year I started with Reaktor 6 and was informed by others in the forum that Reaktor five's manual was better in some aspects with explanations. This is true, I went searching for an explanation on "to and from voice" in version six and found little, only short info about the individual modules; however version 5 was…
-
How to build a self gating randomizer?
I need to build a self gating randomizer? Here is an example of what I need. The randomizer is being driven by an iterator The randomizer outputs a 2, then it waits for 2 steps from the iterator before it outputs it's next value. I need to do some kind of compare between the iterator and itself + the random value so I can…
-
Time based effects with Sine bank + Iterator setup
Hey there guys! I have this setup for a sine bank with 512 partials. I would like to now make the pitch of all even harmonics move back and forth ever so slightly, they could be modulated by a sine wave. I don't know how to do this at the moment, as the iterator only updates each partial once per note press, but for what I…
-
How is it possible for a core cell to not work properly with audio and event inputs.
As shown above the Inv input on the bottom works perfectly as an audio input but erratic at best as an event input. There is a panel on/off button attached to it. It toggles between 0 or 1 and yes it's set to toggle mode. All other inputs work as expected. Being a simple button its almost like it doesn't always create an…
-
Can you use EzFFT to edit the pitch of sounds?
Hey there, I noticed that a lot of the EzFFT modules have outputs for Phase and Amplitude, however, there is no pitch outputs. Is there a way to edit the pitch of each harmonic within a sound using EzFFT or the other FFT macros from Robin Davies? Maybe my understanding of FFT is wrong and it's not possible at all? Not sure…
-
Anti-Aliasing Strategies For A Phase Distortion Oscillator
I'm building a phase distortion oscillator and as one might expect from that technique, aliasing is a major issue. I'd like to hear some opinions on the best way to approach limiting aliasing in such a dynamic and challenging situation. A PD oscillator can create a huge amount of energy above nyquist very easily, and as…
-
Can a core array contain polyphonic data?
Can a core array contain polyphonic data? I want to know if an array in core can load different data on a per voice basis. I'm working on an experimental modulation concept and I want to load up an array that will have a different set of values on a per voice basis. Can core array's do this?
-
Anyone know how to make the Atmos/360 encoder
I would imagine it's like a manikin microphone where capsules are mounted in the ears. I have done that before and it does sound pretty natural when you play it back thru headphones. I'm sure we could emulate it with filters and time delays but there might be an easier way. If anyone has any suggestion that would be nice,…
-
Can anyone suggest a fix for the panel LIST module?
Notice the output value is 0 but it should be 1. Any ideas why. Next I switch to a different entry, open the gui lock button then close it , turn off edit , turn on edit, then I get a 1 as shown. On occasion the list does not function at all, in order to change an entry I have to turn on edit, open and close the lock…
-
How do I round to the nearest value in a list?
I think I'm the first person to ever ask a question on the new forum haha. Basically, I want to have some sort of list, maybe stored in an array or table, with a bunch of numbers between 1 and 127 which represent a scale e.g. Cmajor (so, therefore, it will have some gaps in the list of numbers like 1, 2, 4, 5, 8, 9 etc).…
-
learn blocks via the new classics of modular
This is a continuation of a thread from the old forum: https://www.native-instruments.com/forum/threads/learn-blocks-via-the-new-classics-of-modular.463567/