-
Reaktor Sampler and Soundfonts
My first rookie question… In the longterm I'm building a monster do-it-all synth for myself and Reaktor Might do it. One of the key requirements is to select from the available samplemaps. Firstly, can the Sampler load in maps at 'runtime' or are they embedded into your finished instrument. And secondly, I have lot of…
-
[Bug Report] Reaktor controls "set to default": Value does not change in the plugin host
Problem: When you map a Reaktor knob or fader to a control in a host program like Ableton 12 or Maschine 3.0, both control move in tandem. When you move the knob in Reaktor, the value changes in the host, and when you move the control in the host, it changes in Reaktor. So far so good. When you double click the control in…
-
Event rate , input at audio rate is possible
This is something that has always bothered me about primary event rate See this , the osc takes pitch modulation fom another osc and since the modulatin is going into the event input , the audio from the modulator needs to be converted to events When using the standard ae module , the event rate is determined in the…
-
Krypt: Fix the reverb tail?
I'm sure a few years ago I found somewhere some intructions on how to fix the fix the reverb tail in Krypt. Can't seem to find it now. Anyone? Or did I imagine this?
-
User bank missing from Photone... sometimes!
When I open photone, I see ONLY my own bank under EMBEDDED. But then as soon as I click EDIT, in order to save a change or new preset, my bank disappears, and I see some factory banks show up instead. Now, my bank still shows up in the top header, but I can't save anything to it…. Thoughts???
-
Reaktor has only few synths and no paths
hi, I’ve bought komplete keyboard, and Reaktor is with it, but , I only have a few synths and no paths, do I need to buy the paths ? I’ve seen it’s £189 but I’ve also seen it’s free? Thanks
-
Value gets stuck in the Core Macro
i'm still gaining experience with the core level and am stuck at what is probably a fundamental point again :-/. i'm using the AHDSR envelope from the library and trying to use different settings for "max AHD" e.g. "max R". there's a controller with the values 1-4 for this. this value is multiplied by 5000 within the…
-
Main difference between .ens and .nksr?
Hi, I´m building some Blocks Synths and am having a hard time understanding when to use an Ensemble and an .nksr. I learned, when saving as an Ensemble, one could save Snapshots within the Ensemble. But with a .nksr (whatever that means) one can switch between a wireless and a wired view in the Blocks - but with…
-
How to get the SteamPipe2 Arpeggiator to start on bottom note when ascending
It seems the arpeggiator can sometimes start on the top note or bottom note randomly - theres no rhyme or reason to which note it starts on How can i guarantee it starts on the bass note each time or have some more control? Currently sounds like this https://soundcloud.com/krisjwilliams/the-last-sect-6b-flute-1648b
-
Reaktor 6 presets defaulting
I looked to see if I could find this anywhere, but no one seems to have this problem. Problem: Whenever I try to use a Reaktor instrument in Reaper, I load the preset I want, but during playback it changes the preset to one I don't want. For example, I want to use the 'Pinto' preset on Mikro Prism, but it always changes to…
-
Resonant body, poly or mono?
I am making a basic karplus strong instrument . Three delay lines for the strings ( poly ) and 6 parallel comb filters for the resonant body . I am deciding if the resoant body should be set to poly or rather mono as an effect . Mono Or poly ?
-
Is there a way for one midi patch to recall 2 chosen patches in a 2 instrument ensemble.
I have two instruments in one ensemble, actually one is the instrument and the other is an effect. As it stands I can only select the same snap on both from a midi patch select. Is there a way to save combinations of the 2 so I can as an example recall patch 1 on the instrument and say patch 10 on the other. Or perhaps…
-
on the origin of non-defeatable surprise GUI parameter automation
this is something that will happen sometimes when using in a daw (reaper) host, some "reset" message gets sent when stopping playback it will set some parameter to a defined value that cannot be changed, now that parameter is possessed to always move back to that spot, doesn't matter what settings you try to turn off on…
-
Do i need to purchase reaktor 6 to use monark
I purchased monark recently but now it says in reaktor that my trial has expired, any solutions?
-
SKREWELL - Hardware synth equivalent ideas? What is the structure of Skrewell?
So I’m super crazy about Skrewell, and I would really like to recreate the sound it makes in hardware, probably with modular. I feel like there is a LOT of feedback mixed with delay, and possibly some sort of… folding(?) going on. But I can’t really put my finger on it, and I have no idea who Lazyfish is, or how to get…
-
Primary sequencer with duration
I keep running into this same problem and have never been able to solve it correctly. What is the proper way of using the built-in primary (not core) multiplex 16-step sequencer with variable step duration? I'm using song position —> modulo --> step position and then sending the output value back to modulo. That doesn't…
-
There are no blocks or ensembles in my newly downloaded Reaktor 6
Evening all. I had Reaktor 5 many years ago but as it was a legacy I removed it (and the Komplete Start) from my Mac. But in a moment of madness tonight I decided to upgrade to 6. Bought it. It appeared in my Native Access and downloaded and it opens and when I click on the start screen to play the ensembles it says…
-
Reaktor 6 Crashes Upon Launch After Reinstalling?
Would anyone here be willing to help me please? I'm not sure what to do. Any ideas or suggestions would be greatly appreciated. About a week ago, I accidentally uninstalled Reaktor 6 in Windows, in the uninstall a program settings, which was a big mistake. I own Kontact Komplete 13 and later bought Komplete 14 Standard so…
-
Core duplicate filter events
The core duplicate filter module (from reaktor 5 core ) filters out events with the same value as the previous one , only letting value through which differs from the previous So when feeding it a square, the ouptut shoud be a spike when going from high to low , no ? But the result remains a square
-
Polyplex Output Routing
Hi, I realize this is a slightly older, but just wondering, is anyone aware of a way to route FX channels in Polyplex? I am able to see routing for individual one shots.
