-
Maschine Plus stuck at start up screen after firmware update.
just upgraded to a Maschine+ so I could finally work in true standalone mode. After successfully updating the firmware to 1.6.1, my unit is now completely stuck in an infinite startup loop. This issue started on Friday, and despite submitting two support tickets, I’ve been left with zero solutions and now have to wait the…
-
mic on Maschine
can I loan my microphone in different pads with different effects
-
Projects from Maschine 2 to Maschine 3
Hi! I have 2 questions. :1.Will the projects from Machine 2 open/work if I switch to Machine 3 ?2. I prescribe the automation of performances fx., then I delete it and with a new take recording, the old automation is triggered. Although I deleted it both on the controller and in the software. what is the right thing to do?…
-
How much time takes Maschine central to be installed on Maschine plus?
Hi i want to know how much time takes Maschine central to be installed in Maschine plus I have 12.5 gb of free space in the sd card so it takes too long
-
Export Pattern Audio only exports 1st instrument in group
Ever since the most recent update, when I choose Pattern and click the export icon in the right corner to export the pattern's audio from all of my instruments, I only get audio from the 1st instrument in the group. Is there a fix for this? To get the audio from all of the instruments I have click the instruments icon and…
-
Getting third party multi-sampled instruments into the Maschine sample zones
Hi, It seems like it should be possible but I can’t figure out how. Is there any way to take a multi-sampled instrument that contains wav’s all named with velocity and note information, etc, and have it open up into the Maschine sampler with all the notes correctly populating into the correct sample zone note slots? I…
-
Deselecting All Sections
I am trying to deselect all sections in Song View (so that Follow mode will work). It's easy to do in the software by mouse-clicking in the background of the timeline panel but I can't seem to find a way to do it from the MK3 hardware? Any ideas?
-
How to Update to Version 3.3.1
How can i Update Maschine+ to 3.3.1? Native Access dont have a new Update. Over Wifi and Update the Screen says "Your-Maschine-is-Up-to-Date". I have now Software Version 2.19.. on M+ Firmware 0.19… on M+ Desktop Version: Maschine 2 thanks for help
-
Maschine Plus Update 2.0.0.0 zeigt Kontakt nicht mehr unter Instrumenten an
Vor dem Update wurde mir Kontakt unter Instrumenten angezeigt sowohl bei der Factory als auch bei der User Library. Nach dem neuen Update von Maschine Plus sehe ich Kontakt nicht mehr unter meinen (Factory Library) Instrumenten wobei ich jedoch nur unter meinem (User Library) darauf zugreifen kann. Hat jemand hier das…
-
Ableton Live 12.1 Controller Remote Scripts update
We need new controller Scripts for Ableton Live 12.1 for Maschine Studio, Jam, Mk2, Mikro Mk2!!!!! All controllers. Would be great if NI could update their scripts and even add some more screen integration. I think that would sell much more devices if the Ableton live integration was deeper on the KK keyboards similar the…
-
Maschine Plus Storage Mode Problem
Hello, My Maschine Plus has an issue. I’m trying to use it in storage mode and it’s impossible to copy files from the computer to Maschine Plus SD Card, or simply open Maschine Plus SD. In earlier weeks it didn’t have this issue. It’s very hard for the computer to load the SD card fully and after 5 minutes when it is…
-
Order still in review and nobody from support is answering
My order for maschine 3 is still under review. It is "fantastic" that I paid for a product and did not receive it yet. First time ever that this happened to me. I sent 2 emails, talked with the support bot multiple times to try and fix it and NO ONE will answer my request for a thing that i paid. Can anyone help me with…
-
Maschine 3 Startup
My Maschine 3 was operating just fine last night, this it would not open. I have done uninstalled and reinstalled, I've checked all my plugin pathways and content paths twice. Has anyone seen or heard of this? when maschine 3 starts to load theres a little dialogue in the maschine startup window that says "waiting for…
-
help needed with mk3 maschine not connecting to app
I had tried that to already, thanx what I have found out now after week 2 of this headache, is that because I have a couple different computers, 3 desktops, 1 mac 2 windows, and 2 laptops, 1 windows on mac, after plugging the mk3 into all, its not working on none of my computers, and it worked on all them, so that NKDamon…
-
Maschine 3 Crashes when Quitting - Non Fatal
Does anyone else's Maschine 3 annoyingly crash EVERYTIME you quit the application? Obviously, it's non-destructive happening only after I quit the app. So I never lose any work. But it's a near 100% crash rate at closing as long as I've had the software. Maybe once or twice has it's closed with no issue. Maschine 2 NEVER…
-
Maschine+ Just purchased to find it’s got obsolete software
So after just dropping £1000 for the MAs+ to find that NI have no intention of updating the unit so it will remain with over 4 years old dated software, how can this be allowed to still be sold. It’s like buying a new Laptop to find it has Windows XP on it. I would have gone with Akai Mpc had it made clear this was an…
-
Whats new with NI Accessibility Helper 2.0.1 - For Maschine
What’s New in the Accessibility Helper for Maschine We’ve made some important improvements to the Accessibility Helper's functionality with Maschine, released alongside Maschine 3.3 desktop software and the new Accessibility helper will also support the upcoming Kontrol S-Series MK3 keyboard. Here’s a quick guide to…
-
Quintuplet option in grid
Is there a way of getting quintuplet rhythms in the grid? I see there is option for triplets and simple time. Thanks in advance
-
need of help, HD crashed
I am so in need of help, my main hd crashed and I had to replace it and after loading up 75% of what I had backed up I loaded NI up, I have the mk3 and it said something about NTKDaemon not installing, not knowing wdf is was I proceeded on, not everythings loaded up but my mk3 won't connect, I thought it was the usb,…
-
Maschine 3.0 user samples libraries thumbnails do not show up.
If anyone has any information about this, please tell me. Is this a bug or does the new version use thumbnails in a different way? now all my user libraries are in the "other" section. In the second version, thumbnails work for me. Windows 11
