-
LED Modifiers problem on Xone K2
I encountered with layers overlapping problem, which describing in words is a long and complicated way, so for clarity in a short video I tried to explain on my clumsy English what the problem is. In addition to it, I tried delete Mod3 and duplicating all the necessary led outs (Beat phases, Cell states) and put modifier…
-
X1MK3 - Swap the complete behaviour of the Loop Encoders
I want to swap the entire functionality of the Loop Encoders on the X1 MK3. The Standard functionality is: Turn the Loop Encoders → The Loop length changes Push Shift and turn Loop Encoders → Scroll thru the Track (Beatjump,Move) So i want this to be completely swapped. Problem after the switch is that when i turn the Loop…
-
F1 led output (fundamental settings)
Hi, So im about to map a F1 controller to accompany my Xone K2. Im pretty much in the beginning and so far I have mapped 2 different reverbs to pads number 1 and 5 and they work great. Next I want to add color leds to highlight their on/off status but how do I do it? I have succesfully added led colors to my K2 by 'add…
-
Is there a limit to how many tsi mapping files/commands can be used for a controller?
I'm currently mapping the rane a trak, and have manged to use all available modifiers for a single deck side (deck A) with about ~3500 lines I still have quite a bit more to add that I'm putting in another file plus also more tsi files for removing bugs/ QoL features so I'm looking at most 7 mapping files x2 for deck a and…
-
Map an Encoder on X1 MK3 as a "Button"
Hey Guys. I want to Map one of the Encoders on the X1 MK3 to my needs. But when i want to select "Button" in TYPE OF CONTROLLER Section, its not allowing me to do so, i can only set it to "Encoder". On every other Midi Controller i can Map an Encoder as a BUTTON. Only on the NI X1 Controllers u cant. This is pretty…
-
possible to have X fader track start feature or midi map?
Im transitioning form Djay pro to Traktor pro 4 and Its been a learning curve. In some ways I prefer Djay pro for its IOS similiar usability simplicity. I have gotten used to also using the crossfader to mix in track, so as I hit the crossfader the track starts playing. I have an S2 MK3 is this doable>
-
Does anyone create small custom mods?
I've been wanting a small custom mod for my Traktor s4 mk3 with stems. Ive reached out to traktor mappings but i never get a response, does anyone here create mappings?
-
Guide for Xone 96 DVS Mapping, turning the input select will change the traktor deck type..
Hoi, I made a super quick video where I explain that you can change the "deck control" (internal / scratch) via an external mixer. Just create a new midi mapping where you select the Xone as in an out port, add "Scratch Control On", with "Interaction Mode" set to "Direct" and assign a deck. And of course press learn and…
-
Numark N4 for Traktor Pro 4
Where can I find mapping for my Numark N4 to use for Traktor Pro 4?
-
i did a functional midi mapping for djm s7, but have a issue with the AUTO BPM fx
when i play a track that for example: runs on 145 bpm my mixer internal effects wont sync correctly, in less words i cant use auto bpm in my mixer because the numbers are different and the effect dismatch. I dont know how i can fix this little issue. I put the video of the issue on Gdrive then u can see the issue…
-
bpm adjust vs bpm nudge
I'm confused as to what does what Bpm nudge seems to affect the bpm read out on the advanced tab under grid whilst bpm adjust affects the tempo in the browser tempo column but does not affect the actual track grid tempo, even when the track is reloaded The manual only states what bpm adjust does but seems to more closely…
-
stem generation
have enough memory (32). Have installed Traktor 4. right click prompts me to generate stems. Nothing happens. Please advise. Is there a setting change needed to view?
-
Mapping mix knob to sample knob
I’m sure this is pretty basic, but I’m stuck. My mix knob on my tractor S2 mk3 seems like it’s losing contact with the board underneath because it only works if I press the knob down a little bit. I’m hoping I can just reap this to the knob right above it and also disable the mix knob. Sample knob never gets used. I’ve…
-
Kontrol S4 volume
When I adjust the volume on Deck A, Deck C volume also adjusts, at a slower rate. How do I remedy this?
-
DDJ-SX2 Mapping Traktor Pro 4 mapping
good evening everyone i need your help is there anyone using DDJ-SX2 with Traktor Pro 4 and if so what mapping are they using
-
mini Launchpad midi map to Pattern player
Since i'm using all 4 FX banks Traktor no longer shows the drum patterns in the interface. So I wanted to make a visualization of the active patterns using a launchpad controlled via midi. However when trying to set this up i've come across some issues So far i got the active step to show up on the first 2 rows of the…
-
fx knob wiring (qml coding)
Any ideas what's wrong with this: Wire { from: "%surface_prefix%.fx.knobs.1" to: EncoderScriptAdapter { onTurn: { ... } } } Am I using the right knob names/events?
-
How can I enable the Shift Page functionality on my Kontrol F1 using Rebekah's custom mapping
Hi everyone, I’m having trouble setting up my Traktor Kontrol F1 using Rebekah’s custom mapping, and I’d appreciate your advice. Here’s what’s happening: I successfully imported the Rebekah Traktor Mapping.tsi and Rebekah Effect Settings.tsi files into Traktor. The Basic Page of the mapping works fine, and all controls…
-
NUMARK NSF4X Traktor Mapping (user made/barebones)
Hello everyone, I wanted to share what I've created and been using for my NS4FX controller. I remember posting for help a while ago about trying to see if someone could help with one but I couldn't really find any. Please see my file and if anyone can make it even better, much would be really appreciated for us NUMARK…
-
Remapping Play button on Kontrol X1 MK2
I'm trying to set up a hotcue mode on my X1 Mk2 similar to my old X1 Mk1. I've set up a modifier to control the mode and set the Play button to select/store hot cue 8 when the modifier is active and this should override the factory mapping. THe hot cue function works fine but it doesnt overide the Play/Pause toggle! Ive…