-
Core Implementation of Impulse Generator
I want to implement a simple impulse generator within CoreMacro. It will output a signal at level 1 for just one sample when it receives a gate input. I am imagining the Core version of the Primary Impulse module, but I’m struggling with how to design it. I would greatly appreciate any guidance you could provide. I’ve…
-
FX chain
Hello… I am trying to replicate the functionally (not sound) of an old synth from the 90's in REAKTOR. It's effects were separated into 3 busses. A layer could either be routed to BUS1, BUS2, or BUS3. If the layer was routed to BUS 1, then there would be mix amounts as to how much of BUS2 and BUS 3 you wanted. If the layer…
-
Kind of fun, flashing lights to let you know when something is muted
There's 4 lights in this one but you can use more or less by duplicating the flashing buttons. They receive controller code 32.
-
Popping sounds when retriggering the primary sampler
I'm experimenting with primary samplers for the first time and am encountering short DC offsets that make popping sounds when retriggering a sample in progress. I've made the circuit as simple as possible. It's just a sample player triggered by a pushbutton: I made a sound file where I retrigger it several times before the…
-
Building a drop-down menu (need help).
I'm building a drop-down menu for an upcoming project. It's working great as it is now, but it misses one important feature: i want the drop-down to collapse when clicking outside of the menu's boundaries. So basically anywhere else in the GUI, by way of a Mouse Area covering the width and height of the GUI and layered at…
-
Mixing midi input with GUI mouse control.
Hi all, I'm trying to control a virtual mod wheel with both midi input and mouse control. In and of itself it's easy. Just merge the two. But in case of a knob or mod wheel, midi control only really works if the virtual 'fader' on the GUI is set to zero. That way the output of the fader doesn't get merged with the incoming…
-
Can you animate the background of a Reaktor ensamble?
I would Like to have an animation as the background of the synth I am building in Primary. Is this possible? How? I would also like to change the background as i turn a knob. Is this possible?
-
Why Not Able To Load Audio Samples Into Whoosh?
The title says it all haha I don't see an "Edit" button on Whoosh/Reaktor that I see all youtubers using. Do we need the full paid version of Reaktor 6 to do this? I just have the free one.
-
is there a way of switching modules on and off with a button?
i can find anything online about this really. i want to turn an lfo and 2 adsr's on and off, visually by pressing a switch. im building an s950 sampler, which has started to look good.
-
Has anyone here really studied the internal workings of Molekular?
I'm looking at the internal routing system in molecular and it's kinda confusing. Molekular has a very flexible internal routing system where you can choose from multiple configurations and you can also place each of the 4 FX into any slot within the routing configuration. It's the most flexible routing I've ever seen in…
-
Can Someone Create These Random Effect ?
I have had Reaktor for years but could never figure how to make these unique effects . I have a Yamaha A5000 Sampler that has 3 effects of which I have never seen in any VST, DX plugin or in any other hardware unit, and I'm requesting if someone can make them. The A5000 has a tempo based random delay, tempo based random…
-
How to Dig8 implements expression operations?
Mr. colB, can you explain how your Dig8 implements expression operations?
-
Anybody fancy building a multi-band dynamic-delay FX unit?
I scribbled a design for a multi-band dynamic-delay unit years ago - found the original post-it note recently and thought, I want it but I'm not smart enough to build it. I built a little test version using VST's on Reaper; routing an audio signal into several tracks, filtering each track with a plugin, inserting a…
-
Reaktor building, bipolar/unipolar LFOs
Hi there, i am trying to create a switch to make the LFO bipolar/unipolar. i have checked about this topic online but i could not find anything that helped, maybe because is very specific to my synth. I'll show what is my situation: I have this LFO sending with "IC send" in to a output matrix macro(Next) the "IC receiver"…
-
About modul HW Control in reaktor
I have read the info about node HW Control . it saw that i can refer about the documentation for see the Massage Type. What is it?? Where i can found it?? thank yuo duk
-
Groovebox to SFZ sampler and back?
Hi everyone, I'm intrigued by the SFZ sample instrument format, which—as just a simple text file—can be generated programmatically without needing to manual drag and drop samples onto the Reaktor GUI. I also like how grooveboxes incorporate sequencing, sample playback, and effects into a single convenient interface. I was…
-
How to gate an audio signal in Core?
Hi Reaktor Builders, I have successfully figured out how to gate an audio signal after it leaves the core cell and before it goes to the output (to the sound card). But I cannot find an example or anything in the Core Manuals that describes how to gate an audio signal inside a core cell. I want to be able to use an ADSR…
-
How to add looping to a core envelope?
I've got an AHDSR envelope in core, it's build on the standard core envelope framework, I can't figure out how to add looping to it? I want to make it so that in loop mode the sustain and release are ignored and it will just process through the attack, hold, decay stage and then loop through itself again. How could I do…
-
audio crackle when reading from an audio table. What am I doing wrong?
Hi! It's been a long time since I did anything in Reaktor (besides building Racks). I am looking to create a simple rewind plugin. Basic operation: audio is recorded into an audio table. Settings in two screenshots attached. whenever the 'reverse' button is pressed (which comes in at the REV input in my screenshot) the…
-
Reaktor on iPad?
Are there any plans to make a Reaktor-like product for iPads? I'd like to run one of my ensembles on an iPad, so I checked out AudioKit to assess how much work it would be to port it. Yikes, it's complicated! And for experienced programmers only. I've certainly been spoiled by the ease of Core.