-
Does anyone know how to make Reaktor blocks polyphonic?
I’ve been learning how to build synths using the blocks in Reaktor, but I wasn’t able to figure out how to make a synth, built with blocks, polyphonic. Is it possible to do this?
-
NAN with Multiple Envelope Follower in Single Core Macro
Hey everyone, I am trying to build an external audio effects processor and running into some mystery problems. I'm using a couple of Envelope Followers within a core macro that are part of a multi-stage audio process wherein the signal gets analyzed by EF #1, gets modified based on EF output, then proceeds to EF #2 which…
-
Anyone good with math?
I wanted to make a lookup table for each of the below log and exp modules in excel. Sometimes the read only lookup tables end up in the local cache in the computer and might be faster and use less cpu. I forgot the math. I'd also like to make a table for the log used for a db conversion.
-
A Smoother with separate times for up and down?
I seem to remember someone had made a smoother with independent smoothing times for ascending and descending smoothing operations. I know about ZGabr's CSO smoother where you can set it to smooth ascending only or descending only, but that's not the one that I'm thinking of, this one had full bi polar smoothing at all time…
-
Reaktor OSC out , n0 activity in meter
The OSC indicator does never light up when I connect a note pitch to the osc out Ip adress is correctly set i the preferences The only activity I get on the meter is when pressing the test button
-
Best way to add reverse function to Beat Loop module
Hi folks. I've been working on a loop player based on the Beat Loop module. It does most of what I need it to do, but I'd like to add a reverse button to it, and I'm wondering how best to achieve this. I tried adding one I found on a tutorial, and put it before the Beat Loop's output, but the trouble with that is that I…
-
Using the mouse area and the multidisplay port to control different parameters on Reaktor
Hi! I write here because i would like to use the mouse area and the multidisplay port to control different parameters. I explain it better... the Reaktor primary manual explains how to build a sequencer and an additive synth with this two modules to control respectively the steps and the partials.. i want to use the X…
-
Reaktor CPU Issue
Greetings, My current ensemble has a lot of CPU overload when in 88200Hz or higher sample rate. Can someone test on there computer if it’s fast enough how much cpu on my windows computer (10 version) I would need to run this ensemble with three multi-timbrals included. Can this ensemble run as multi-timbral with high 96Khz…
-
Reverb Sync Rates
Is there a way to make the Reverb ensemble in Reaktor clock to Tempo Based Sync Rates (etc 1/4, 1/8 time) like the Diffusion Mode in Replika Delay in Native Instruments. Any assistance would be most appreciated.
-
Organ building
One thing that makes a difference in tone bar organs is the need to emulate a rotating tone bar. This means you have to fade in the continuous tones when a key is pressed. Therefore the tone generator should be a 1 voice instrument. Although you can have 60 or so oscillators running constantly in phase, it can be done with…
-
Yamaha CS-80 emulation
I am just wondering if anyone has made further progress on some of the unique qualities of the CS-80 / CS-60. There is one ensemble in the user library, but the CEES80 is over two decades old.
-
How to : display internal connection status in panel view?
Hi everyone, I'm messing around with something and i need some help or advice to achieve a visual thing. I'm looking for a way to display the active/inactive status of an internal connection on the panel view. As in: a lamp or image that pops up when such and such connection is made / is active. Not a measurement /…
-
How to force button to send PC message?
I've made little ensemble for Program Change messages automation control. I can't force button to send message when it depressed with mouse, but when I use it with assigned OCS control - all works fine. This is base structure of the ensemble, "List" is used for choosing of desired PC number. I tried to replace "Add" module…
-
Reaktor 6; Internal connections (ic send/receive); Where have the breadcrumbs gone?
Reaktor5 showed you how to find your way from IC Send to IC Receive with a series of "breadcrumbs" - Macro names - in the properties/Connect panel. In Reaktor6 these have disappeared! I can't navigate around the ensemble anymore. Help - please!
-
Fixed velocity for a synth
Hey folks, I have a basic subtractive synth. Env->Osc->Filter->Out. I was wondering if it's possible to have a fixed velocity setting? What would code look like for that? Been looking all over for this but haven't had any luck. Thanks!
-
Sync With Wavetables
This is a very intense question. Does any one know how to add Sync Function to the Sampler in REAKTOR…for Wavetables; the Sampler only does FM. Any help would be most appreciated.
-
Where can I find a block like the one circled?
Hello everyone, I'm looking for the blocks with 7 input (min) / 1 output as in the attached capture.
-
Arpeggiator Hold
Does anyone know how to add a Hold Function for Sequencer to repeat endlessly in the ensemble attached below? Or better yet; having the Sequencer trigger notes by Pitch and Gate Out instead of using just the VCA. Any help would be most appreciated. Any programmer who can add Hold Function to Sequencer, whilst keeping the…
-
Wavetable package
I think I finished my little work on wavetables, started here. Some days ago David uploaded an ILO version -I like it more, mainly because it uses one thing for what I'm using two, so the result is more uniform. I still uploaded it because I also like it, mainly because I think it's neat. It ended up being much simpler…
-
How to create a constant volume crossfade?
I've tried the standard crossfade as well as the parabolic crossfade, and they are both giving me a noticeable volume dip in the center at 50/50. Whats the best way to create a constant volume crossfader for mixing 2 signale where the center 50/50 point will maintain both signals full volume?
