-
Welcome back to your "Building With Reaktor" area
Hey everybody, This is your new place to discuss Reaktor building, as previously available here: https://www.native-instruments.com/forum/forums/building-with-reaktor.68/ We made sure to keep the more advanced area for both Reaktor and Kontakt available in our new space. With your help, we will do our best to make some of…
-
How to make a shepard/risset tone with the sine bank module?
I am trying to create a shepard/risset tone generator using the sine bank module, I have tried several different methods and none of them have provided useful results. I want to have a saw/square wave consisting of 16 harmonic partials rising or falling over time. Ideally there would be 8 layers to make this sound smooth…
-
FX chain
Hello… I am trying to replicate the functionally (not sound) of an old synth from the 90's in REAKTOR. It's effects were separated into 3 busses. A layer could either be routed to BUS1, BUS2, or BUS3. If the layer was routed to BUS 1, then there would be mix amounts as to how much of BUS2 and BUS 3 you wanted. If the layer…
-
Creating wind instrument breath noise samples via FFT
I'd like to synthesize short samples (1 to 4 seconds) of specially filtered noise. I'll then use them in a wavetable-based Reaktor ensemble to mimic breath noise. Such noise is basically a comb filter with peaks at the note frequency and its harmonics. But the peaks of the harmonics and the valleys between them are quite…
-
Beginner Friendly: Using NI Reaktor Blocks as an infinitely creative audio effect
While the idea of using the Reaktor may seem too complicated to many at first, it's actually not that scary and is definitely worth it because you can get some really unique effects. As with many things, it is convenient to start with something simple that quickly gives tangible results. So, you can use Reaktor as an…
-
GUI design: adventures in Blender.
Hi everyone! I've started experimenting with Blender. I'm trying to rebuild a 2D design i made into 3D. The process is already well underway because i waited for the new forum to launch before starting a thread. The "original": Some working shots of the 3D version (work in progress, obviously): The idea is to, when…
-
Kind of fun, flashing lights to let you know when something is muted
There's 4 lights in this one but you can use more or less by duplicating the flashing buttons. They receive controller code 32.
-
Popping sounds when retriggering the primary sampler
I'm experimenting with primary samplers for the first time and am encountering short DC offsets that make popping sounds when retriggering a sample in progress. I've made the circuit as simple as possible. It's just a sample player triggered by a pushbutton: I made a sound file where I retrigger it several times before the…
-
Building a drop-down menu (need help).
I'm building a drop-down menu for an upcoming project. It's working great as it is now, but it misses one important feature: i want the drop-down to collapse when clicking outside of the menu's boundaries. So basically anywhere else in the GUI, by way of a Mouse Area covering the width and height of the GUI and layered at…
-
R5 library ladder filter (look at this crazy thing)
as a hands on learner in pursuit of figuring out how stuff, works one great method is to look at older stuff. looking at this older version of the core ladder filter is pleasantly baking my noodle in this regard first thing that jumped out was it seems to be a 4 pole with 3x oversampling, not 3 pole with 4x as the macro…
-
Mixing midi input with GUI mouse control.
Hi all, I'm trying to control a virtual mod wheel with both midi input and mouse control. In and of itself it's easy. Just merge the two. But in case of a knob or mod wheel, midi control only really works if the virtual 'fader' on the GUI is set to zero. That way the output of the fader doesn't get merged with the incoming…
-
Can you animate the background of a Reaktor ensamble?
I would Like to have an animation as the background of the synth I am building in Primary. Is this possible? How? I would also like to change the background as i turn a knob. Is this possible?
-
Why Not Able To Load Audio Samples Into Whoosh?
The title says it all haha I don't see an "Edit" button on Whoosh/Reaktor that I see all youtubers using. Do we need the full paid version of Reaktor 6 to do this? I just have the free one.
-
is there a way of switching modules on and off with a button?
i can find anything online about this really. i want to turn an lfo and 2 adsr's on and off, visually by pressing a switch. im building an s950 sampler, which has started to look good.
-
Has anyone here really studied the internal workings of Molekular?
I'm looking at the internal routing system in molecular and it's kinda confusing. Molekular has a very flexible internal routing system where you can choose from multiple configurations and you can also place each of the 4 FX into any slot within the routing configuration. It's the most flexible routing I've ever seen in…
-
Can Someone Create These Random Effect ?
I have had Reaktor for years but could never figure how to make these unique effects . I have a Yamaha A5000 Sampler that has 3 effects of which I have never seen in any VST, DX plugin or in any other hardware unit, and I'm requesting if someone can make them. The A5000 has a tempo based random delay, tempo based random…
-
How to Dig8 implements expression operations?
Mr. colB, can you explain how your Dig8 implements expression operations?
-
Trying to build an per harmonic partial ADSR envelope...
I've been working on an additive synth for quite some time and one of the major hurdles is creating a per harmonic envelope generator. How would you go about creatind a per harmonic envelope with up to 512 harmonic envelope layers where each harmonic fades in and out according to it's own adsr modulator? Does anyone have…
-
Anybody fancy building a multi-band dynamic-delay FX unit?
I scribbled a design for a multi-band dynamic-delay unit years ago - found the original post-it note recently and thought, I want it but I'm not smart enough to build it. I built a little test version using VST's on Reaper; routing an audio signal into several tracks, filtering each track with a plugin, inserting a…
-
Reaktor building, bipolar/unipolar LFOs
Hi there, i am trying to create a switch to make the LFO bipolar/unipolar. i have checked about this topic online but i could not find anything that helped, maybe because is very specific to my synth. I'll show what is my situation: I have this LFO sending with "IC send" in to a output matrix macro(Next) the "IC receiver"…
-
About modul HW Control in reaktor
I have read the info about node HW Control . it saw that i can refer about the documentation for see the Massage Type. What is it?? Where i can found it?? thank yuo duk