BUG: Fresh installation of Maschine 2 Factory Library missing files
A fresh installation of Maschine 2 Factory Library via Native Access is missing these 10 presets for Drum Synths which were included in previous versions:
- Breaker Dnb
- Breaker Dub
- Breaker Fat
- Breaker Rim
- Breaker Tight
- Crash Alpha
- Crash Bell
- Crash Box
- Crash Gate
- Crash Rider
Is there any explanation for this?
This doesn't look like a bug to me; the definition of a bug is that it can be reproduced. Well, if I check my setup then I can still find these presets:
So, as for an explanation... could be anything: are you sure you're looking at the right section? Did you change anything in the mean time or is your main library located on an external storage perhaps?0
Thank you for confirming that these presets should be available!
Did you do a fresh install with the current version within the last two weeks?
I tried several installations from scratch and made a diff to my old Library on a different disk.
Result is always the same (so far).
Also, you‘re on Win, I’m on Mac.
(BTW, please don’t try to educate me on what a bug is and what not, I have plenty of experience with software as a user, as a developer and as a tester.)0
I've renamed my lib folder temporarily and did a fresh install and those presets are there, I also did a
diff -rfcheck and it's all good here. Try again, maybe there was an issue and it has been fixed?1
Perhaps you are looking at the Instrument Tab and not the Sounds tab? There are two sets of Drumsynth Presets.1
FYI, the diff output of the current compare:
mac:oli$ diff -r Maschine\ 2\ Library/ Maschine\ 2\ Factory\ Library/ Only in Maschine 2 Factory Library/Documentation/License Agreement: ThirdPartyContent.rtf Only in Maschine 2 Factory Library/Drumsynth Presets: Breaker Dnb.mxsnd Only in Maschine 2 Factory Library/Drumsynth Presets: Breaker Dub.mxsnd Only in Maschine 2 Factory Library/Drumsynth Presets: Breaker Fat.mxsnd Only in Maschine 2 Factory Library/Drumsynth Presets: Breaker Rim.mxsnd Only in Maschine 2 Factory Library/Drumsynth Presets: Breaker Tight.mxsnd Only in Maschine 2 Factory Library/Drumsynth Presets: Crash Alpha.mxsnd Only in Maschine 2 Factory Library/Drumsynth Presets: Crash Bell.mxsnd Only in Maschine 2 Factory Library/Drumsynth Presets: Crash Box.mxsnd Only in Maschine 2 Factory Library/Drumsynth Presets: Crash Gate.mxsnd Only in Maschine 2 Factory Library/Drumsynth Presets: Crash Rider.mxsnd
Interesting is that the ThirdPartyContent.rtf is also missing ( I had forgotten about that one).
Now going to try a fresh install...0
New installation, exact same result as above.0
Oops, I forgot I'm ahead due to an NA beta but I tried again with the current version, same result.
mac:oli$ diff -r Maschine\ 2\ Library/ Maschine\ 2\ Factory\ Library/
How come you have the same path there twice? It looks like you're comparing a folder with itself.
Your results seem odd, I get a bunch of matches for hidden .DS_Store files for example.
[email protected] ~ % diff -r /Volumes/SSD/NativeInstruments/Maschine\ 2\ Library /Volumes/SSD/NativeInstruments/_Maschine\ 2\ Library Binary files /Volumes/SSD/NativeInstruments/Maschine 2 Library/.DS_Store and /Volumes/SSD/NativeInstruments/_Maschine 2 Library/.DS_Store differ Only in /Volumes/SSD/NativeInstruments/_Maschine 2 Library/External Instruments: .DS_Store Only in /Volumes/SSD/NativeInstruments/_Maschine 2 Library/FX: .DS_Store Only in /Volumes/SSD/NativeInstruments/_Maschine 2 Library/Groups: .DS_Store Binary files /Volumes/SSD/NativeInstruments/Maschine 2 Library/Samples/.DS_Store and /Volumes/SSD/NativeInstruments/_Maschine 2 Library/Samples/.DS_Store differ Binary files /Volumes/SSD/NativeInstruments/Maschine 2 Library/Samples/Instruments/.DS_Store and /Volumes/SSD/NativeInstruments/_Maschine 2 Library/Samples/Instruments/.DS_Store differ Binary files /Volumes/SSD/NativeInstruments/Maschine 2 Library/Samples/Loops/.DS_Store and /Volumes/SSD/NativeInstruments/_Maschine 2 Library/Samples/Loops/.DS_Store differ Binary files /Volumes/SSD/NativeInstruments/Maschine 2 Library/Sounds/.DS_Store and /Volumes/SSD/NativeInstruments/_Maschine 2 Library/Sounds/.DS_Store differ
Maybe it's because you're in Mojave and theres a specific bug related to it? I guess you have to contact support.0
Thanks for checking.
- I don’t have the same path twice. I compare „Maschine 2 Library“ with „Maschine 2 Factory Library“. The reason for this is explained in my bug report for NA in another thread (which should be moved from the Komplete Kontrol forum to the Native Access forum).
- I removed all irrelevant results of hidden .DS_Store files from my diff output.
I really have a hard time imagining how tge macOS version should have any impact on whether these files are installed or not, but it is a difference. Another aspect could be my registrations.
Seems like I have to file a bug report.
Forum Feature Request: Allow (Mods) to create tickets directly from forum threads.0
So, I just thought of another thing: how are you using Maschine? As a VST or stand-alone?
See, it's my experience so far that when you change something more drastic to your library then firing up Maschine in stand-alone mode can often help to force a rescan. Sometimes the VST doesn't seem to fully refresh and then removed contents still appears (obviously new stuff won't appear).
Could this also apply to your situation perhaps?0
@ShelLuser : Ising it in both ways.
However, as already mentioned, I’m not talking about what appears in the Maschine browser, but about files on disk installed by Native Access.
But this gave me an idea: Maybe those files are actually installed in a new location and the old Library contains both locations while the new one only contains the new location.
- 12.1K All Categories
- 21 Welcome
- 552 Hangout
- 67 NI News
- 267 Tech Talks
- 1.2K Native Access
- 5.7K Komplete
- 733 Komplete General
- 1.3K Komplete Kontrol
- 2.1K Kontakt
- 565 Reaktor
- 182 Battery 4
- 313 Guitar Rig & FX
- 220 Massive X & Synths
- 261 Other Software & Hardware
- 2.6K Maschine
- 24 Sampling Room
- 3.1K Traktor
- 2.8K Traktor Software & Hardware
- Check out everything you can do
- Create an account
- See member benefits
- Answer questions
- Ask the community
- See product news
- Connect with creators