Supreme Edition MOD

It can't do anything on touch, the browse knob is not touch sensitive.

Did you change "%surface%.browse.mode" into "%surface%.browse.view" to have the VIEW button toggle browser mode?

As far as i can see, S3 & S4 are both WiP, too much so for club work, so far.

Open this file: "...\Native Instruments\Traktor Pro 3\Resources64\qml\CSI\S3\S3Side.qml"

line 113 looks like this:

   function deck(id) {
       switch (id) {
           case 1: return deckA
           case 2: return deckB
           case 3: return deckC
           case 4: return deckD
       }
   }

copy and paste this code right beneath it:

   Wire { from: "%surface%.top_deck"; to: SetPropertyAdapter { path: propertiesPath + ".top_deck_focus"; value: true; color: topDeckId == 1 ? deckA.deckLEDColor : deckB.deckLEDColor } }
   Wire { from: "%surface%.bottom_deck"; to: SetPropertyAdapter { path: propertiesPath + ".top_deck_focus"; value: false; color: bottomDeckId == 3 ? deckC.deckLEDColor : deckD.deckLEDColor } }

The end result will then look like this:

   function deck(id) {
       switch (id) {
           case 1: return deckA
           case 2: return deckB
           case 3: return deckC
           case 4: return deckD
       }
   }

   Wire { from: "%surface%.top_deck"; to: SetPropertyAdapter { path: propertiesPath + ".top_deck_focus"; value: true; color: topDeckId == 1 ? deckA.deckLEDColor : deckB.deckLEDColor } }
   Wire { from: "%surface%.bottom_deck"; to: SetPropertyAdapter { path: propertiesPath + ".top_deck_focus"; value: false; color: bottomDeckId == 3 ? deckC.deckLEDColor : deckD.deckLEDColor } }

It worked with the S4MK3. I hope this will work with the S3 as well.

What happens with STEM or SHIFT+STEM?

The S3 BrowseEncoder is not yet fully developed, but the one from the S2 looks good. You could try to use it. I can't test it but this is how i would do it.

Open the file "...\Native Instruments\Traktor Pro 3\Resources64\qml\CSI\S3\S3Deck.qml" (always use a good editor like notepad++ for this)

In my SupremeMod version it looks like this in line 167:

   BrowserModule {
       name: "browse"
       surface: deck.surface
       deckId: deck.deckId
   }

/*
   S3BrowseEncoder {
       name: "browse"
       active: deck.active
       deckId: deck.deckId
       surface: deck.surface
   }
*/

S3BrowseEncoder is inside /* */ and so inactive (as a comment)

Turn it into this:

/*
   BrowserModule {
       name: "browse"
       surface: deck.surface
       deckId: deck.deckId
   }
*/

   S2MK3BrowseEncoder {
       name: "browse"
       active: deck.active
       deckId: deck.deckId
       surface: deck.surface
   }

When this is done, holding SAMPLE and turning the BrowseKnob should now change the Capture_Source. Check, if any of the Browse section's buttons now do what they are supposed to do.

Too bad, i suppose we should be patient for Aleix to give it a once over then.

SupremeModEdit uploaded:

Discussion Link