S4MK3 & S3: Performance MOD (qml coding)

1…1213151718…33

Comments

  • Sûlherokhh
    Sûlherokhh Member, Traktor Mapping Mod Posts: 2,818 mod
    https://community.native-instruments.com/discussion/comment/149271#Comment_149271
    https://community.native-instruments.com/discussion/comment/149804#Comment_149804

    WiP Update:

    • Changes above in the quotes, plus… :
    • Phase meter, bigger BPM display, loop display toggle integration for remix decks.
    S4MK3_TP3.11.1_PerformanceMod_11e_WiP.zip

  • djvic91
    djvic91 Member Posts: 87 Helper

    you are correct, I didn’t specify that the phase meter was popping up when you press the cue button or the play button on the non-master deck. Sorry about that and not putting that in the comments.

  • Sûlherokhh
    Sûlherokhh Member, Traktor Mapping Mod Posts: 2,818 mod

    So, if you don't find any more things to improve on the current WiP, i am going to put up version 12 soon.

    • I've improved the pop-up a bit (no more pop-up when starting the deck, unless it's not the master deck).
    • I also added the turning jogwheel led to cueing.
    • Playing around with SHIFT+MixerFX buttons (1,2,3,4) to set the pop-up duration to 1 to 4 seconds.

    What do you guys think of Cue and Play LED blinkers in the manner of Pioneer CDJ's? I would place a toggle for this feature on SHIFT+MixerFX (Filter).

    🦋

  • Sûlherokhh
    Sûlherokhh Member, Traktor Mapping Mod Posts: 2,818 mod

    Update WiP:

    • Phase-Meter pop-up conditions for slave decks improvements.
    • Pop-Up duration (for all pop-ups) can be manually selected from 1 to 4 seconds using SHIFT+MixerFX buttons (1,2,3,4).
    • Cueing will now also make jogwheel LED turn.

    Enjoy!

    S4MK3_TP3.11.1_PerformanceMod_11f_WiP.zip

    🦋

  • Sûlherokhh
    Sûlherokhh Member, Traktor Mapping Mod Posts: 2,818 mod
    edited April 29

    Update WiP:

    • SHIFT+MixerFX (Filter): Toggles CDJ-style Cue & Play button LED blinkers. Cueing will now also make jogwheel LED turn.
    • SHIFT+MoveEncoderPush: Triggers Re-Loop. It's mechanically Cue Play (CUP) with an added Loop Active trigger if the targeted active cue is a loop cue. Behaviour depends on your CUP settings (Preferences➔Transport➔Cue Play (CUP Mode))
    S4MK3_TP3.11.1_PerformanceMod_11h_WiP.zip

    GIve me some feedback if this is something you like or need and if it works.

    Enjoy! 🦋

    Edit: Cue button colours are sometimes a bit off. Still working on it.

  • pixel
    pixel Member Posts: 232 Advisor

    You never cease to amaze me.🙂

    I hope that you also get energy compensation for your great project every now and then, from the community and native-instruments😀

  • djvic91
    djvic91 Member Posts: 87 Helper

    looking forward to trying out after work late this afternoon.

  • pixel
    pixel Member Posts: 232 Advisor

    Not that the S3 users think that nothing is happening anymore, I'm in the process of implementing the FX feature😋. Sûlherokhh still has a great loop function for the S3, the next update will be great😎

    VID_20240429_172613 (2).zip

  • djvic91
    djvic91 Member Posts: 87 Helper

    @pixel i have to applaud you for all the work you do on the S3! either controller is getting great updates! thanks to the both of you. thank you guys Sûlherokhh and pixel

  • pixel
    pixel Member Posts: 232 Advisor

    The new FX function is great, I have new things to discover🤣

    VID_20240429_215429 (2).zip

  • djvic91
    djvic91 Member Posts: 87 Helper

    tested and approve. you are correct, my right deck changes color on the cue button but if i use my left shift button and if i use my right shift button it changes my left cue color . for now just select the deck, change the color forward or backwards once and return it back and the color will match. if you switch it on and of again it will change again. I'm sure you'll fix it at your convenience

  • djvic91
    djvic91 Member Posts: 87 Helper

    ok just found out something else, what ever side shift you use when its done and the play button is blinking press the opposite shift button just press it once only the shift and it will give you the correct color

  • djvic91
    djvic91 Member Posts: 87 Helper

    • SHIFT+MoveEncoderPush: Triggers Re-Loop. It's mechanically Cue Play (CUP) with an added Loop Active trigger if the targeted active cue is a loop cue. Behaviour depends on your CUP settings (Preferences➔Transport➔Cue Play (CUP Mode))

    went to my settings and selected instant because it works faster. different people different preferences but that's how i chose to use it. works good no issues.

  • Sûlherokhh
    Sûlherokhh Member, Traktor Mapping Mod Posts: 2,818 mod
    edited April 30
    https://community.native-instruments.com/discussion/comment/150455#Comment_150455

    Instant would be my default, so the jump doesn't hiccup.

    https://community.native-instruments.com/discussion/comment/150451#Comment_150451
    https://community.native-instruments.com/discussion/comment/150452#Comment_150452

    Update WiP:

    • Master Deck selection when engaging Auto Master Mode (via HOLD Master) has been finetuned.
    • CDJ-style Cue button LED blinker is now in WarmYellow (for the CDJ colour coding). If this option is not active, Cue button LED has your selected deck colour.
    • LED colour and brightness hiccups when changing blink setting, using shift or changing deck has now been fixed. Boy, that was a complicated mess. 🙃

    I really, really like this one. I hope you do too. Enjoy

    S4MK3_TP3.11.1_PerformanceMod_11i_WiP.zip

    🦋

    Edit: If nobody finds any more bugs, i will release this as version 12 soon.

  • djvic91
    djvic91 Member Posts: 87 Helper

    will try out tomorrow afternoon. Had to do something today

Back To Top

Categories