Read our community note - here.
More information on future updates M+
Comments
-
do you have the Komplete audio 6 mk2? Is it still worth buying? I have the old traktor audio 10. Been working perfectly all these years but now that I have several standalone instruments I have loads of projects scattered around on different units. Would you recommend the audio 6 mk2 as an interface to capture all my stuff from to Logic?
0 -
I would only recommend Komplete Audio 6 MKII to Maschine+ users. Its not a bad interface for the price, but there is so much choice now.. For me, its benefits over the competition kind of end at the official driver support for M+ standalone
0 -
but how is it recording other hardware into a daw on the audio 6? My audio 10 is still great, but can’t hook up other gear to it.
0 -
No idea, I only use it with my M+. Should work fine I suppose?
Why cant you hook other gear to your Audio 10? Just use rca - 1/4" adaptors
0 -
I’ve tried using the ”in” on my audio 10 and failed. Is it possible to use it to connect and record for example my mc101? Rca-jack cable.
0 -
So now this topic is about the use of the Audio 6…?
When it comes to using an external audio interface with the M+, one should take into consideration that it can only use 1 interface. Being it the internal one - or - an external one. Taking that limitation into account I personally find the Audio 6 to limited, because it effectively adds just 1 extra stereo output.
Same goes for the AUDIO4C, but its headphones output can also be used. It also has one extra trick up its sleeve and that’s the second USB-C port, which is also 15W powered. So it can also route audio and midi from the M+ to an iPad or laptop. It also offers extra midi in / out and a midi hub, all to be controlled by Auracle X software.
And then we’re back to what this topic is all about… the long awaited update to the M+ core software, with the improved kernel and class compliancy. After that we have to test and see what interfaces are stable.
0 -
Connect your audio 10 to your computer.
Open Traktor Audio 10 Control Panel.
Click on channel setup.Click unlock
Click on startup.
Make sure Direct Through is not selected on all 4 channels.
Make sure Input Sens is set to Line on all 4 channels.
Click lock
Disconnect the audio 10 from your computer.Connect to your Maschine+.
I can confirm that the audio 10 works with all 10 inputs, outputs, and midi with the Maschine+2 -
thank you! I will try as soon as I can! I’ll message you instead so I don’t pull the discussion again to a different topic.
0 -
Unless Audio4C is a Native Instruments product, it will not have a driver in M+, unlike the Kontrol Audio 6, Therefore, it will have to rely on the USB Class compliant mode, and its performance will be inferior even if it offers more channels.
1 -
Whatever… won’t buy an old model interface for just one extra pair of outputs.
0 -
It's totally your choice.
0 -
Still waiting for M 3.0 in M+ ;)
2 -
Still waiting for the latest version 2, too.
And there’s even a fresh ‘2025 and still waiting’ topic:
In the meantime NI did another internal ‘team shuffle’, so I guess they’re really busy realigning internal before external communications.
Hopefully ‘improving update strategies’ is also part of the alignment process.
2 -
Nothing going on, nothing going on
I've got a whole lot of nothing
Nothing going on
Nothing going on, nothing going on
I've got a whole lot of nothing
Nothing going on- Clawfinger
6 -
HAHAHA, that was funny!
0
Categories
- All Categories
- 19 Welcome
- 1.6K Hangout
- 66 NI News
- 843 Tech Talks
- 4.3K Native Access
- 17.3K Komplete
- 2.1K Komplete General
- 4.5K Komplete Kontrol
- 6K Kontakt
- 1.6K Reaktor
- 394 Battery 4
- 882 Guitar Rig & FX
- 447 Massive X & Synths
- 1.4K Other Software & Hardware
- 6.1K Maschine
- 7.7K Traktor
- 7.7K Traktor Software & Hardware
- Check out everything you can do
- Create an account
- See member benefits
- Answer questions
- Ask the community
- See product news
- Connect with creators