How can I set up Maschine to learn the controls for Parameter Pages the same as in Komplete Kontrol?

mtamayo
mtamayo Member Posts: 39 Member
edited October 22 in Maschine

How can I set up Maschine to learn the controls for Parameter Pages the same as in Komplete Kontrol?

In Komplete Kontrol, there is an option available like the attached screenshot, that once you map an external MIDI controller (a controller other than Native Instruments) to the 8 knobs, it allows those same 8 mapped parameters to be mapped across all the parameter pages when you navigate through the different pages.

In Maschine, I've only been able to see that you can do individual MIDI Learn assignments via each individual knob, and not to where you only assign 8 parameters and then it automaps to all pages (like in Komplete Kontrol).

How can I make this same assignment in Maschine? My use case is that I'm using a Maschine Mikro MK2 (or this could also be the case even with a Mikro MK3 controller), and I'd like to have a third party MIDI controller with knobs to assign to the parameter pages without having to assign each one by one and having to use up several MIDI CCs.

Untitled Image


Screenshot 2023-07-16 at 1.23.45 PM.png


Tagged:

Best Answer

  • D-One
    D-One Moderator Posts: 3,575 mod
    edited July 2023 Answer ✓

    KK's is more "open" than Maschine, probably because it was designed to be used in DAW's while Maschine was initially just a standalone app adapted to be a plugin later.

    The procedure @Sunborn described is to have fixed mappings for external Automation/Control, it's not for having 8 knobs that adapt to whatever parameter Page you are in. Basically, any MIDI Controller can be a KK controller but Maschine requires a Maschine controller so it's a more "closed" ecosystem.

    In short to have parameters pages you need to use a Maschine controller.

Answers

  • Sunborn
    Sunborn NKS User Library Mod Posts: 3,058 mod
    edited July 2023
    https://community.native-instruments.com/discussion/15206/how-can-i-set-up-maschine-to-learn-the-controls-for-parameter-pages-the-same-as-in-komplete-kontrol

    I have never actually done that before because i don't need it, but i like to experiment, so here it is what i found. However the whole process should be confirmed (and maybe corrected) by an experienced Maschine users such as @D-One

    So, here we go:

    Step 1 - Go to the marked areas --> Input and select your external midi instrument. Do this for the Output too (though it might be not really necessary)

    Clipboard00.jpg


    Step 2 - Then go in the marked areas of the next image (Macro section) and select MIDI.

    Clipboard01.jpg


    Step 3 - Use Add (+) to add more knobs & sources.

    Clipboard02.jpg


    Step 4 - After you add everything you need, go to "Automation" and use the Midi Learn function.

    Clipboard03.jpg


    Step 5 - After assign everything, save it, though i am not quiet sure as what... probably as a Template Project that you can load it as your base, every time Maschine starts.

    I hope that this works! :-)

  • mtamayo
    mtamayo Member Posts: 39 Member

    @Sunborn thank you for your comment and for looking into it. However what you described does not automap to all pages. From you example you didn’t actually load any instrument to test it out, but if you had you’d see that it doesn’t control anything since you didn’t map to any a parameters. If you try it out in Komplete Kontrol it’d maybe clarify what I was referring to. Thanks!

  • D-One
    D-One Moderator Posts: 3,575 mod
    edited July 2023 Answer ✓

    KK's is more "open" than Maschine, probably because it was designed to be used in DAW's while Maschine was initially just a standalone app adapted to be a plugin later.

    The procedure @Sunborn described is to have fixed mappings for external Automation/Control, it's not for having 8 knobs that adapt to whatever parameter Page you are in. Basically, any MIDI Controller can be a KK controller but Maschine requires a Maschine controller so it's a more "closed" ecosystem.

    In short to have parameters pages you need to use a Maschine controller.

  • mtamayo
    mtamayo Member Posts: 39 Member

    @D-One Darn, that's a real bummer. Would be so useful if they activated this in Maschine as well. Where does one submit feature requests?

  • D-One
    D-One Moderator Posts: 3,575 mod
    https://community.native-instruments.com/discussion/comment/84873#Comment_84873

    Yeah.

    You can create a thread here in the forum and tag it as a "feature request". Manage your expectations tho, attending feature requests is not a common thing to say the least.

  • macchinista
    macchinista Member Posts: 50 Advisor
    https://community.native-instruments.com/discussion/comment/84873#Comment_84873

    You mean that black hole where all users' dreams go to die? LoL

    No seriously, if you are satisfied with plugin control only, your best bet is to purchase a KK MIDI controller, for example an M32 keyboard. You'll have control of all plugins (including the internal ones), + effects. But you won't be able to control sampling parameters, macros, and a bunch of other things in the Maschine software.

  • D-One
    D-One Moderator Posts: 3,575 mod
    https://community.native-instruments.com/discussion/comment/84963#Comment_84963

    Yeah, I tried to say it in the most positive way I could, a hard task. 😂

    Oh yeah, I forgot to say that, an M32 is a decent alternative.

This discussion has been closed.
Back To Top

Categories