Supreme Edition MOD

Hi Aleix. Happy to say my old ThinkPad is running again. No trouble with the S4 screens anymore (apart from extremely jumpy waveform progress.

I repaired the problem with the pad modes not switching decks when using the deck buttons. My solution looks like this:

"\qml\CSI\S4MK3\S4MK3Side.qml"

   // Wire { from: "%surface%.deck"; to: "deckButton" }
   // ButtonScriptAdapter {
       // name: "deckButton"
       // brightness: bright
       // color: LED.legacy(focusedDeckId)
       // onPress: {
           // if (shift && screenView.value == ScreenView.deck) screenView.value = ScreenView.fxSettings
           // else if (screenView.value == ScreenView.fxSettings) screenView.value == ScreenView.deck
           // else topDeckFocused.value = !topDeckFocused.value
       // }
   // }
   Wire { from: "%surface%.top_deck"; to: "deckButtonTop" }
   ButtonScriptAdapter {
       name: "deckButtonTop"
       brightness: bright
       color: LED.legacy(focusedDeckId)
       onPress: {
           if (shift && screenView.value == ScreenView.deck) screenView.value = ScreenView.fxSettings
           else if (screenView.value == ScreenView.fxSettings) screenView.value == ScreenView.deck
           else topDeckFocused.value = true
       }
   }
   Wire { from: "%surface%.bottom_deck"; to: "deckButtonBottom" }
   ButtonScriptAdapter {
       name: "deckButtonBottom"
       brightness: bright
       color: LED.legacy(focusedDeckId)
       onPress: {
           if (shift && screenView.value == ScreenView.deck) screenView.value = ScreenView.fxSettings
           else if (screenView.value == ScreenView.fxSettings) screenView.value == ScreenView.deck
           else topDeckFocused.value = false
       }
   }

This doesn't solve the missing LEDs, just the switching.

I've been preparing to present my SupremeModCustomEdit in another thread this weekend. It will be an Add-On to one of your recent versions (which will be needed as foundation). Hopefully i will have some (moving) pictures for documentation as well.

I just caught a small typo that stalled out the REMIX button LED for STEM decks on the S5.

\CSI\S5\S5PadsModeButtons.qml (line 94)

           // Wire { from: "%surface%.remix"; to: SetPropertyAdapter { path: activePadsMode.path; value: PadsMode.stems; color: LED.legacy(side.deckId) } enabled: hasStemProperties }
           Wire { from: "%surface%.remix"; to: SetPropertyAdapter { path: activePadsMode.path; value: PadsMode.stems; color: LED.legacy(deckId) } enabled: hasStemProperties }

Edit: and another one, that kept the bottom display from displaying properly.

\qml\Screens\Shared\Overlays\BottomControls.qml

   // else if (isTraktorS5 && (state == "SLOT 1" || state == "SLOT 2" || state == "SLOT 3" || state == "SLOT 4") && deckType.value == DeckType.Stems ) {
   else if (isTraktorS5 && (state == "SLOT 1" || state == "SLOT 2" || state == "SLOT 3" || state == "SLOT 4") && deckType.value == DeckType.Stem ) {
       switch (column) {
           case 0:
               return "VOLUME";
           case 1:
               return "FILTER";
           case 2:
               return "FX SEND";
       }
   }

There is still an error with the screen buttons 4 & 8 to switch the loop knob controls from filter to FX Dry/Wet. No matter the value, turning the knob always adjusts the slot filter. There is also an error in that you can go right offscreen (using screen button 8) to a value that stem decks don't have (presumably the max value isn't 2 but instead 4 like a remix deck. I'll tell you when i have fixed it.

You can try to change this yourself.

Open this file: "...\Native Instruments\Traktor Pro 3\Resources64\qml\CSI\Common\MK3Controllers\BrowserModule.qml"

In line 15 change this:

       Wire { from: "%surface%.browse.mode"; to: "browser.full_screen" }

to this:

       Wire { from: "%surface%.browse.view"; to: "browser.full_screen" }

If you do, tell us what happened.

Edit: @Aleix Jiménez : The BrowseEncoder of the Mk3 controllers is not touch sensitive, only the Move/Loop encoders are.