OBS Streaming - CueButton Headphone Issue

Hi peoples,

i got it ;)

I connect the Behringer UCA222 via USB. Cinch-Output from the S2 to Cinch-Input of this card. Cinch Output from this card to AMP (Monitor switched to headphones). I installed all ASIO Drivers but dont use it already. Traktor works also with WDM Drivers and in OBS i can only use/see these WDM Outputs, no ASIO Source available. On OBS stage you need a outputsource, the Traktor S2 WDM. Now you can stream without the CueHeadphoneSignal ;) I test it yesterday and have no stuttering and no "wrong" headphonesignal.

Thank for all your help, have a good weekend and stay tuned.

ok, long time ago ;)

...and i find a solution. i run only traktor on my laptop with asio drivers and OBS on my PC. The traktor output goes to the line-in of the behringer soundcard. line-out from this, to line-in from PC and this signal can i grab in the obs and all fine. only issue, i have no traktor window on stage in obs, but its ok for me.

thx for all your help, stay healthy and friendly

All comments

Hello,

https://support.native-instruments.com/hc/en-us/articles/360006980357-How-to-Stream-Your-TRAKTOR-Performance-to-YouTube-Live-or-Twitch

Setup B could be an option for you

Uwe

Hi Uwe,

thanks for your fast response. The S2MK3 has no RCA Inputs, that is the problem.

Maybe i should switch to the S3 Kontroller?

Check in the obs audio panel it might be using both your cue out and main out. If it’s using both you can mute the cue.

Hi Wiley,

thx for your tipp. there is no option in obs audio panel to mute or split the signal from traktor. it's awesome, when i record my set with the internal mix recorder from traktor, there is no "CueButtonHeadphone" Signal, everything is fine. Only in stream you can here it, makes no sense. I have tried Virtual Audio Cable, like the "sunflower solution" on Mac ;) And it "works", the sound is disappeared. But the whole system, Dell XPS15 is stuttering. No fun. Any other ideas?

wish a good start for monday morning ;)

https://youtu.be/TnJvQaFWSK4

Maybe his solution works for you. If you have an onboard soundcard you can use the line in and record from there, then you can use asio for traktor and will have better performance.

Uwe

Hello,

if you have an onboard soundcard you can use it for method one from that site i linked, you also could buy a cheap behringer and use it as input in OBS. Unfortunately if you use desktop audio, i think you use it, it does not divide the channels.

Uwe

Obs works different on everybody's system and depends on version #, OS, Asio, ect.

It works best if you have a dedicated computer just for handling Obs and another computer for your audio. Obs is ok but there are other alternatives like streaming directly from your iPhone (no android solutions yet) or even stream from your GoPro. Even these solutions are analogous to having 2 computers.

Example of streaming iPad audio and video directly from a GoPro through the iPhone app (iPad = 1 computer and iPhone = second computer)

And another Example with the iPad sending Traktor dj2 audio to my iPhone and the iPhone sending the audio and video wirelessly to Obs on my laptop which has another camera attached to it.

See here for the setup pics #4

I don't know if windows have analogous software that Macs have to do these things though. Getting something like an Atem mini pro, which simplified everything for me, is the easiest one computer $olution now.

Hi peoples,

i got it ;)

Thank for all your help, have a good weekend and stay tuned.

Happy to read this, but i would use asio with traktor and of course wdm for the software you record from the behringer. The routing and everything stays the same.

Uwe

OK,

i'm back again ;) Because on longterm you have some little clicks and cuts sometimes and the sound feels not right. And yes Uwe, i tried to use ASIO for Traktor and you need to install a extra asio driver for the mk3. When i use this driver, the soundquality is much better. I have also installed the obs-ASIO driver, but i dont know how i can use ASIO with OBS?

I make some screenshots, because i will find a solution with asio drivers. At first the audio setup from traktor.

In OBS i can only use the Monitor or Master WDM Driver, can't find any ASIO source

The same in the source on stage, OT i know ;) And the ASIO Panel, i have no clue what to do 😬

I tried some different setups, but its more try and error i think, i'm not a specialist ;)

Maybe anybody can help?

Good night to all

https://community.native-instruments.com/discussion/comment/2164#Comment_2164

I think the Asio panel has merged audio in/and outs.

I gave you this advice because I'm on a Mac.

https://community.native-instruments.com/discussion/comment/2124#Comment_2124

The analog of this is the asio panel on windows. Try revisiting just the s2 and obs setup and see if you can disable cue via the asio panel.

Hello,

it's normal that you can't use asio with 2 different devices, there are only a few devices that can that. So you used asio with your traktor S2, then the cable to the behringer to audacity and it crackles?

Uwe