Is it possible to have multiple outputs through Komplete Kontrol plugin?
I am quite literally just trying to sidechain my kick inside of Komplete Kontrol. When I make a new audio track in Ableton I see "Out 2-Komplete Kontrol" but I just cannot find within Komplete Kontrol how to route different parts of my drums through multiple audio outputs.
Best Answer
-
Can't speak for KK V3 but seems confusion is afoot as to what KK can actually do and what you are asking (tho it is clear what you want to do…)
Unless KK V3 has changed/dropped/ruined another feature, Multi-Channel outputs are a thing in KK V2 at the very least and do work as you would expect, that is for a Drum plugin for instance, you can select the drum elements to channels and then these appear on the outputs from Komplete Kontrol that you can send to different channels in your DAW. I do this already (for years) with plugins loaded within KK such as EZDrummer, Battery, Omnisphere to name a few and have generated NKS where the plugin is already configured with multi-out for some plugins such as Addictive Drums
Example, here is a multi-channel setup for Omnisphere using KK V2. Komplete Kontrol should simply offer 16 channels to the DAW (regardless of what plugin is loaded, these are always listed as available outputs) and if you choose in your plugin to send something to channel 2, it will appear on the output channel 2 of the plugin.
You have to set the audio channels to monitor the INput and set the audio from for KK, then select the channel.
Done this for years and if this isn't possible in KK V3 (which I would think it is), that is yet another point i'd make as to how unsuitable KK V3 was (and still is) for release…
This is what you should see if you select the channel source for an audio channel as one of your KK plugin instances as the source:
1
Answers
-
Komplete Kontrol doesn't support multiple outputs. Which instrument are you using inside KK? If it's Kontakt you could drop it directly onto the track and use the multiple outs from that.
0 -
Actually KK does support multiple outputs, you can see them clearly here loaded in Freestyle
However they only work with Kontakt multis - you can't (yet?) load more than one plugin and use them multi timbrally (longstanding FR)
1 -
OK, Maybe I'll just shut up 🤣🤣
0 -
That is such a design flaw, I use Komplete Kontrol so I can use my keyboard with all of the preset knobs and macros why isn't this possible? I use a lot of drums in Komplete Kontrol.
0 -
It is because it can only host a single instrument plugin (even though later fx were added they are very much an afterthought and don't really do much still in KK)
To be honest it is possible it could also work with some multi timbral single instruments, I have just only see it work with Kontakt multis and that is the only use case NI seem to have envisaged for it so far. But maybe someone should try it? I guess it might work if it is a plugin that has its own built in mixer like Kontakt has (Omnisphere comes to mind)
0 -
So like in my situation I'm using a drum machine called Electro by Teletone Audio, every drum has it's own output options but none of them seem to go out to a different audio track like I'm looking for
0 -
I don't know that plugin but there is some discussion here of a similar scenario with Battery
0 -
Can't speak for KK V3 but seems confusion is afoot as to what KK can actually do and what you are asking (tho it is clear what you want to do…)
Unless KK V3 has changed/dropped/ruined another feature, Multi-Channel outputs are a thing in KK V2 at the very least and do work as you would expect, that is for a Drum plugin for instance, you can select the drum elements to channels and then these appear on the outputs from Komplete Kontrol that you can send to different channels in your DAW. I do this already (for years) with plugins loaded within KK such as EZDrummer, Battery, Omnisphere to name a few and have generated NKS where the plugin is already configured with multi-out for some plugins such as Addictive Drums
Example, here is a multi-channel setup for Omnisphere using KK V2. Komplete Kontrol should simply offer 16 channels to the DAW (regardless of what plugin is loaded, these are always listed as available outputs) and if you choose in your plugin to send something to channel 2, it will appear on the output channel 2 of the plugin.
You have to set the audio channels to monitor the INput and set the audio from for KK, then select the channel.
Done this for years and if this isn't possible in KK V3 (which I would think it is), that is yet another point i'd make as to how unsuitable KK V3 was (and still is) for release…
This is what you should see if you select the channel source for an audio channel as one of your KK plugin instances as the source:
1 -
I think it is - just a feature I am aware of but never use - thanks
I thought it would work with Omnisphere at least
0 -
KK 3.3 has 16 stereo out.
0
Categories
- All Categories
- 18 Welcome
- 1.7K Hangout
- 67 NI News
- 895 Tech Talks
- 4.6K Native Access
- 17.8K Komplete
- 2.2K Komplete General
- 4.8K Komplete Kontrol
- 6.3K Kontakt
- 1.1K Reaktor
- 407 Battery 4
- 923 Guitar Rig & FX
- 467 Massive X & Synths
- 1.5K Other Software & Hardware
- 6.4K Maschine
- 8.2K Traktor
- 8.2K Traktor Software & Hardware
- Check out everything you can do
- Create an account
- See member benefits
- Answer questions
- Ask the community
- See product news
- Connect with creators