[v1.6.1] MASCHINE PLUS/MK3/MIKRO MK3 Ableton Live 11+ & 12.1+ MIDI Remote Script

1…1719212223

Comments

  • DominikGX
    DominikGX Member Posts: 25 Member
    https://community.native-instruments.com/discussion/comment/139519#Comment_139519

    It does. But you must select Maschine MK3 EXT MIDI additionally.

  • lovedevil
    lovedevil Member Posts: 4 Member

    I cant seem to get the scripts to recognize midi input and output once copying the folder to User Library in Live 12. Any idea why this might be happening? I've selected Mikro Mk3 Unofficial after copy just for clarifation.

  • DominikGX
    DominikGX Member Posts: 25 Member
    https://community.native-instruments.com/discussion/comment/140738#Comment_140738

    WIndows user? You have to copy it into User Library, typically in the Documents of current user.

  • lovedevil
    lovedevil Member Posts: 4 Member
    https://community.native-instruments.com/discussion/comment/140761#Comment_140761

    thanks that's exactly what I said I did. The problem isnt you it's me though, or rather native instruments. The micro mk3 is actually a brick without purchasing maschine software. Since my hardware code was somehow already registered to another account, the situation seemingly unsolvable due to a proprietary business model that wishes you to own nothing, I took it upon myself to fix the situation using other means.

  • gbrown44
    gbrown44 Member Posts: 11 Member
    edited March 16
    https://community.native-instruments.com/discussion/comment/140776#Comment_140776

    This can happen if you purchase a used model and the previous owner chose not to release the license in-order to keep the software. It can also happen if someone purchased a unit from a store, registered, and then returned the unit.

    I purchased a few used Mikros before and had that issue. I ended up sending a well enough written email to NI and was issued/given a code for 1 unit and since I had an extra Maschine hardware/software license in my account that was unused the facilitated a way for me to use it with the other used Mikro i'd purchased.

    It probably helped that i'd been a registered Maschine user since early on in MK1 - MK3.

  • Elton Memishaj
    Elton Memishaj Member Posts: 151 Advisor

    Hello everyone,


    I'm sorry for my inactivity lately, I've been very busy with work and family.

    Yes, the script works with Live 12.

    I am very excited to check out new features of Live 12 and will come up with more ideas for new features for this script.

    The development of v1.7.0 release has been paused for some time, I will rearrange what features will go in this release and might exclude the Fixed Velocity, as I cannot seem to implement it, despite of various attempts.

    Might as well make an installer for both Windows and MacOS, for an ease of installation, still the MIDI Input/Output need to be manually set in Live's Preferences and Controller Editor to be applied will still be manual.


    I will let everyone know for more news!

  • AdelV
    AdelV Member Posts: 327 Guru
    https://community.native-instruments.com/discussion/comment/141134#Comment_141134

    Thank you for your work and support 👌❤️✌️

  • dok.ryconn
    dok.ryconn Member Posts: 5 Member

    Elton - Thanks for putting in all the work on this script! It is so useful and NI should be paying you a salary because since they completely gave up on controller templates. Sorry if these are reallyy basic questions but I could not find the answer in this thread:


    1. Will there ever be a possibility of making use of the MK3 screens? Even if it were just the Ableton status bar text, this would be so helpful. I think the Maschine Mk2 still holds the crown for the best Ableton controller because of the scale, root note, and octave info displayed on the controller screen with the NI Ableton template.
    2. If it's not possible to code the script to show the Status Bar text, Might it be possible to have the note values change based on the changes the scale, root note, and octave on the right-side screen while in Keyboard mode?

    I just really miss the pad mode navigation functionality of the original NI (official) Ableton Live remote script for the Maschine Mk2 and wish I could see it replicated in someway on the Mk3.

    Thanks again!

  • Elton Memishaj
    Elton Memishaj Member Posts: 151 Advisor
    https://community.native-instruments.com/discussion/comment/141352#Comment_141352

    Hello!


    Thank you for the kind appreciation towards my work!

    Unfortunately, the use of screens needs a complete rewrite of the script, to use new protocols or ways of accessing the MK3 screens.

    The notes already get updated if you change the scale and/or root note in Live, but the screens cannot reflect the new notes. It will stay always the same note as it is shown in the Controller Editor template.

    Great idea, though, I will have to think about if I would start to research more and consider to create a script for MK3 with screens and all the buttons, etc.


    Thanks!

  • Michael Gaidamaka
    Michael Gaidamaka Member Posts: 3 Newcomer

    How does the note repeat function work? Is it quantized or not?
    In my particular case, I prefer unquantized note repeat for finger drumming, as live performance is always slightly off the grid.

    Thanks! : )

  • Kryptologie
    Kryptologie Member Posts: 2 Newcomer

    Hi Elton,

    Ty so mush for script ! But, i have just few limitations for my workflow. I need to assign copy, paste clip function. And, if possible, cut /2 clip length. It's difficult to add this ? I've been looking for a solution for a week

  • Elton Memishaj
    Elton Memishaj Member Posts: 151 Advisor
    https://community.native-instruments.com/discussion/comment/150526#Comment_150526

    Hello,

    I am sorry for my late response,

    The note repeat function is quantized to the selected grid, but can be changed by adjusting/touching the touch strip while the note is being repeat.

    I did not test this before, but maybe it can be unquantized if you disable or turn off the grid in Live (Clip View).

  • Elton Memishaj
    Elton Memishaj Member Posts: 151 Advisor
    https://community.native-instruments.com/discussion/comment/153503#Comment_153503

    Hello!

    The Copy/Paste in this script only works for the selected (or all) notes.

    You can duplicate clips, while being in CLIP mode, hold DUPLICATE and click on the clip pad to duplicate it. You can also duplicate the selected CLIP via DUPLICATE (single click), while in the CLIP mode.

    Currently, the Clip length cannot be adjusted from the controller, as you can only double the selected clip (SHIFT (restart button) + DUPLICATE). It will double the selected clip's length and content.

    This is a good idea to implement a future feature to change the selected clip's length via a button combination + the jog wheel (clockwise/anti-clockwise rotate to increase/decrease the length, respectively).

    I will take note for this idea! Thank you so much!

  • eseketedigo
    eseketedigo Member Posts: 9 Member

    Hello!

    Thanks for your work. I had a problem when i try to expand and collapse, dont work GROUP+1-15

    Ableton 12, Windows 11, Mikro Mk3

  • vagtler
    vagtler Member Posts: 2 Member

    Hi,

    JFYI: seems that the script is not compatible with Ableton Live 12.1 anymore.

Back To Top

Categories