Will be OK to use charger listed below for Kontrol S88 mk3 ?
USB C , Anker Nano II 30W Fast Charger Adapter, GaN II Compact Charger
US Specs:
Input: 100-240V~ 1A 50-60Hz
Output:
5.0V==3.0A 15W
9.0V==3.0A 27W
15.0V==2.0A 30W
20.0V==1.5A 30W
Thanks in advance.
PS
I know S88 mk3 requirements, asking if multiple output voltages are OK or it is recommended to use fixed 5V output charger.
Best Answers
-
Guys, Thank you very much for a full explanation of the topic.
I didn't know anything about USB-PD "profiles" or negotiation between “some chips” built in charger and S88 so that is where my concern came from. The S88 is very expensive for me, so I want to be sure that if I plug in something it won’t burn it. All my previous instruments/gear came with dedicated power supplies with unique plugs. So there was no thinking involved. If you have any suggestions of other good for the S88 and currently available chargers then let me know. I really appreciate your help.
Best regards
Kuba.2 -
Thank you all again, including recent post by reffahcs and acceptance of the question by Jeremy_NI.
0
Answers
-
I use a Dell (3rd party) laptop 20V 3.25A 65W charger on my s88 mk3 and it works fine.
back of mine (pic below) shows similar to yours although mine doesn’t show wattage (easy to work out)
As far as amps and wattage is concerned, a device will only draw what it needs, my charger is saying, if needed it can go up to 65 watts
There’s various USB standards, apart from USB-PD (which is what mine and the one you’re looking at are), all the other USB specs are 5V. USB-PD can support up to 20V, 5A, 100W. The USB-PD also states it HAS to also support 5V, 9V and 15V. Many also support 12V but that’s not part of the standard.
Wattage is simply voltage multiplied by amps. Hence:
5V at 1.5A will draw 7.5W
5V at 3A will draw 15W
20V at 5A will draw 100W
So if a device is using 5V and 1.5A, it will draw 7.5W, doesn’t matter how many watts the power supply can deliver, that’s how many watts are needed.
Likewise if a 5V device only wants 1.5A, doesn’t matter if the power supply is 3A, 1.5A is all it will use.
Think about your wall socket, in UK it’s 13A. When you plug in say a phone charger, a router, a games console etc it doesn’t draw anything like 13A, but plug in a 3000W kettle, it will use 12.5 amps ( to find amps it’s watts divided by volts, so 3000w / 240v in Uk)
0 -
Hello,
this shouldn´t be a problem, the charger will, in the case of the S88 MK3, never output more than 5V, cause this needs some chips to communicate with each other and what not.
0 -
The multiple voltages are the different USB-PD "profiles" that @Ojustaboo mentioned. It's really just to let you know if you want to charge something super fast it can go up to 20 volts @ 30 watts.
My laptop for example needs 65 watts to charge while it's powered on. So knowing that, your charger wouldn't be a good fit for my laptop. But Ojustaboo's Dell charger would be a perfect match.
The short answer is that USB-PD will negotiate between the charger and device to be charge and picked whatever is the best that can be supported. Anker is a solid brand, but this is why you need to be cautious of cheap USB power supplies.
0 -
Guys, Thank you very much for a full explanation of the topic.
I didn't know anything about USB-PD "profiles" or negotiation between “some chips” built in charger and S88 so that is where my concern came from. The S88 is very expensive for me, so I want to be sure that if I plug in something it won’t burn it. All my previous instruments/gear came with dedicated power supplies with unique plugs. So there was no thinking involved. If you have any suggestions of other good for the S88 and currently available chargers then let me know. I really appreciate your help.
Best regards
Kuba.2 -
Yeah I'm still surprised given all the issues with compatibility, needing USB-C hubs etc... that NI just didn't toss in a power supply they knew would work.
I use this hub and it works great for my S61 MK3, using the factory single USB-C cable. It's a powered hub so it should work fine for the S88 as well. I bought it specifically because I have a Mac Studio, so I can plug it into the back USB-A 3.2 ports and still connect USB-C to the hub, and it's pretty cheap too. But there are definitely other USB hubs that will work.
Personally I like having a powered hub instead of a single dedicated "charger" for a device because hubs are more versatile. A 65 watt or even 30 watt power supply just for the S88 is pretty overkill.
2 -
Thank you all again, including recent post by reffahcs and acceptance of the question by Jeremy_NI.
0 -
I think it may be prohibitively expensive to try to figure out what power supplies work in which countries. By comparison, a USB-C plug is a USB-C plug, no matter in the world where you are.
Also, power supplies are little transformers and they're not clean and pure as the wind-driven snow to make. They require magnets, copper windings, management firmware, and lots of chemicals to make. There may even be an environment tax to sell such devices in some countries. There could be many reasons why manufacturers just don't include them anymore, but hassle factor is probably high on the list.
0 -
What's to figure out? The international power supply "problem" has been solved a long time ago. Universal AC adapters have been around for quite some time, it's not exactly cutting edge tech.
If Native Instruments was able to source a universal AC/DC adapter for the Maschine+ then there's no reason why they couldn't source one for the Kontrol MK3 keyboards. They simply didn't do it because they wanted to save cost and they assumed everyone has a spare USB-C charger sitting around collecting dust so nobody would care.
0 -
Yep, I THINK in the EU it was decided not to keep supplying new chargers with every product as most people had one or two already sitting in a drawer somewhere, and too many were being chucked away and ending in land fill.
Problem with the S series is that it uses USB-C and while many people might have USB-C, many others don’t, for instance my PC has no USB-C ports, my iPhone isn’t new enough to have USB-C, my iPad does have it, but I use that every day for charging.
From what I can gather, if I’ve understood correctly, if you have the mk3 88 note, you’re going to need a charger, this should at least be made very very clear on adverts (with a link to suitable chargers, while I might know what to get, many people wouldn’t have a clue) my new S88 sat there for a day while I waited for Amazon to deliver one as I was not made aware in advance that I needed one. not a happy start. I do think that if this is the case, they should have included one in the box, there’s too many dodgy ones on Amazon etc
1 -
I ordered two different dedicated USB-C Power supply that meets the specs declared by NI from amazon and still, I get the "Not enough power" warning. Anyone can point me to a specific sku from Amazon ?
0 -
Hi Gaetan
There is no SKU listed on Amazon. I don't know if I can post Amazon link here.
If you won't find let me know. I'll post it.Anker 715 Charger ( Nano II 65W )
Model Number: A2663
Today $27.98Description
Anker USB C Charger, 715 Charger (Nano II 65W), GaN II PPS Fast Compact Foldable Charger for MacBook Pro/Air, Galaxy S20/S10, Dell, Note 20/10+, iPhone 15/Pro/Pro Max, iPad Pro, Pixel, and MoreASIN B08T5QN2TR
Best regards, Kuba.
0 -
And I have used old (and new) Apple AC adapters; the ones new enough to have one or two female USB-C sockets on them. The lowest wattage one I have now is 35 Watts, though I might have had success with a 20 Watt unit back when I first bought my MK3.
A suggestion for anybody who is having no luck getting enough power even with multiple power adapters: Try a different cable. I actually have had USB cables go bad. And one was an actual Apple Thunderbolt cable. You can also try reversing the plug in one end of the cable, and then in the other end if the first try doesn't work. USB-C cables are not universally reversible; my cable tester says so; even with known-good cables.
0 -
Wow, a post from mid-February. But this still applies, so…
Yep, I THINK in the EU it was decided not to keep supplying new
chargers with every product as most people had one or two already
sitting in a drawer somewhere, and too many were being chucked away and
ending in land fill.Companies can't win for losing these days, it seems. If you provide a power supply/charger with your new product, then you get accused of making the e-waste problem worse. You might as well be making AC adapters and just putting them out for the trash collection that goes to the landfill.
Or you DON'T provide a free power supply/charger with your new devices, and you get accused of being greedy.
In a way, it's cruel. Society keeps beating the donkey whether he listens or not.
Problem with the S series is that it uses
USB-C and while many people might have USB-C, many others don’t, for
instance my PC has no USB-C ports, my iPhone isn’t new enough to have
USB-C, my iPad does have it, but I use that every day for charging.My PC has two USB-C ports in the motherboard, and I built this one probably 4+ years ago. I also have an Asus Thunderbolt PCI-E card installed, which gives me two TB ports on the back, so that I can drive my UAD Thunderbolt audio interface.
But really, I find Thunderbolt to be more of a hassle than it is worth, so my next audio interface will be a USB version.
And I still have the iPhone 12, so I too still have the old "Lightning connector", but truth be told, I only use a cord when I'm in the car and want to use Apple Carplay's features. Charging the phone at home is always done with wireless charging. I was planning to upgrade to the 15 last year when it was first announced, but then I got to thinking more about it, and I decided that this time, I could just go a whole 4 generations between upgrades.
At this rate, I could possibly decide to wait for the iPhone 17 to come out. I could then easily justify getting the battery service done on this old one (I think I'm at 85%), and maybe finally get around to replacing the cracked screen protector too, lol.
This iPhone 12 "Pro Max whatever-whatever" has certainly been durable. The main reasons I'd want to upgrade is for the camera advances and the switch to USB-C.
0 -
Companies can't win for losing these days, it seems. If you provide a power supply/charger with your new product, then you get accused of making the e-waste problem worse. You might as well be making AC adapters and just putting them out for the trash collection that goes to the landfill.
Or you DON'T provide a free power supply/charger with your new devices, and you get accused of being greedy.
In a way, it's cruel. Society keeps beating the donkey whether he listens or not.
True, but I think the situation with the 88 note is a little different, given the amount of people suffering power problems and needing to buy an additional adapter.
Even if the adverts stress “some people might need an additional power supply and we recommend getting one with the following minimum specs ……”. It would be ok, while I knew about the firmware update problems some people were having when I bought mine in January, the power issue had escaped me, hence mine was sitting doing nothing for 24 hrs while I waited for Amazon
My PC has two USB-C ports in the motherboard, and I built this one probably 4+ years ago.I only realised how old my PC was towards the end of last year, while that might sound like a stupid thing to say, what I mean is up until the latter part of last year, my PC ran everything I threw at it, at a speed I was more than happy with and I didn’t bother working out its age.
Even now there’s only a few things that’s showing its age,
I initially built my PC in 2013 (i7 LGA2011) so it’s 11 years old, since then (up to the latter part of last year) I updated the graphics card, added more memory and added/replaced the hard drives with SSDs
As it was going to be towards the end of this year/beginning of next before I can replace my PC, at the end of last year and beginning of this year I added both a PCI-E m.2 adaptor along with a 4TB M.2 and also a PCI-E USB-C card.
I added the USB-C card purely for the S88.
So, after 11 years:
There’s a handful of patches that this PC now struggles with regardless of (usable) buffer size / sample rate. Obviously as PC’s get better/faster, these sort of patches will become much more common.
Studio One struggles reading my loops collection (I downloaded everything that comes with Studio One Plus) unless I remove its 16 largest loop files
Apart from those, it still works very well with no noticeable slowdowns.
0
Categories
- All Categories
- 19 Welcome
- 1.4K Hangout
- 60 NI News
- 733 Tech Talks
- 3.9K Native Access
- 15.8K Komplete
- 1.9K Komplete General
- 4.1K Komplete Kontrol
- 5.5K Kontakt
- 1.5K Reaktor
- 364 Battery 4
- 814 Guitar Rig & FX
- 416 Massive X & Synths
- 1.2K Other Software & Hardware
- 5.5K Maschine
- 7K Traktor
- 7K Traktor Software & Hardware
- Check out everything you can do
- Create an account
- See member benefits
- Answer questions
- Ask the community
- See product news
- Connect with creators