Kontrol S88 MK3 - remains in MiDi-Mode

Layman · 2025-01-31T15:28:16+00:00

There was an error rendering this rich post.

Hallo, my very new Kontrol S88 MK 3 is connected to a Win10-PC. I was just editing the MiDi-Setup, but now I can't get out of it. So I cannot come back to the Browser. Nevertheless I am really connected via USB C to Komplete Control and can play all sounds I've editing on the computer. I have extra full power supply. In the manual you can read: "As soon as a Kontakt or Komplete Kontrol instance is found on your computer (running as a stand-alone application or as a plug-in on the track currently selected in your DAW), your keyboard automatically switches from MIDI mode to Plug-in mode and lets you control this instance. But it doesn't do so.

What is going wrong? What shall I do?
There a no such problems with my 2 years old S49 MK2.

Waitin hopefully and thanks a lot for any advice
ULi F

Find more posts tagged with

Accepted answers

Uwe303

Hello,

have you tried to press "browse" or "plugin" over the 4d encoder. You can also press the keyboard sign within kk on the tp right.

All comments

Uwe303

Hello,

have you tried to press "browse" or "plugin" over the 4d encoder. You can also press the keyboard sign within kk on the tp right.

Layman

Thank you Uwe! But it didn't work. The "Browse"-button isn't aktive and so it dosn't work. I can't find a "Plugin"-button. And also no keyboard sign within Komplet Kontrol on the top right. I show you the situation.

But I have a new experience with my S 49 (MK2). I've …

PoorFellow

https://community.native-instruments.com/discussion/41993/kontrol-s88-mk3-remains-in-midi-mode

I am really connected via USB C to Komplete Control and can play all sounds I've editing on the computer.

You still ought to try using an USB-C hub , please check discussion here and forward.

Else then what is your Native Access and Komplete Kontrol version ? You need to use Komplete Kontrol version 3.x.x. to use with the MK3 keyboard .

Also then as far as I know then you can not have two N.I. keyboards connected to the same computer using USB.

Also I'd advice you to set keyboard to Midi 1.0 unless that that you have a specific reason not to : How to Switch a Kontrol S-Series MK3 Keyboard to MIDI 1.0

Can I Use More than One Kontrol S-Series MK3 Keyboard Simultaneously?

Using more than one Kontrol S MK3 keyboard simultaneously on the same computer (e.g. Kontrol MK3 and another Kontrol MK3 / MK2 / A or M keyboard) is not supported.

This can lead to inconsistent communication between your computer and the keyboards and cause a number of instabilities.

If you want to use two MIDI keyboard controllers simultaneously, it is possible to use a second non-Kontrol MIDI keyboard controller, as this should not interfere with the Kontrol integration.

My Komplete Kontrol Keyboard Does Not Start

Kontrol S-Series MK3 Troubleshooting Guide

Kontrol S-Series MK3: Troubleshooting Firmware Update Issues (appropriate trouble shooter even if not at firmware update step)

Alternatively then please contact N.I. Komplete Kontrol Support

In case that you need guidance contacting support : Please read : how to get support !

ALDREAD

https://community.native-instruments.com/discussion/41993/kontrol-s88-mk3-remains-in-midi-mode

it might be the kontrol mk2 overriding the mk3 in komplete kontrol , what happens if you put the mk2 in midi mode .

In maschine there’s a controller select option , little icon near the transport , that lets you select which controller you want in focus, is there that option in kk

donthackmike

I'm having the same issue with only an mk3 on Mac. I have to restart the keyboard multiple times. Even with an additional power supply.

PoorFellow

https://community.native-instruments.com/discussion/comment/227543#Comment_227543

You might have to try the USB-C hub advice :

Quote Mattew_NI 2025-04-23 :

USB-C Connectivity Issue:

Problem:
Some computer chipsets made between2020 and 2023 have a known USB-C error that can't be fixed. This can cause sporadic problems with USB-C peripherals like the Kontrol SMK3, including connection failures, freezing, or issues with firmware updates.

Solution:
If you experience these issues, try using a USB-C hub between your Kontrol S MK3 and your computer. This can help avoid the problem and ensure a stable connection. This is critically important during firmware updates, as data loss could cause broken firmware. Make sure the hub supports both power and data transfer.

My Komplete Kontrol Keyboard Does Not Start

Kontrol S-Series MK3 Troubleshooting Guide

Quick links

Unanswered questions