Does Kontakt libraries [NKS] be loaded on MASCHINE+?

ethnikman
ethnikman Member Posts: 3 Newcomer
in Maschine

Hi community!

I am building a dawless setup and my missing link is to be able to play libraries from the spotlight Collections live (without a laptop).

Can Kontakt libraries (NI or 3rd party) be loaded as virtual instruments within Maschine+ ?

Any feedback is much appreciated!

Best Answer

  • LostInFoundation
    LostInFoundation Member Posts: 3,766 Expert
    Answer ✓

    @ethnikman You can find anything that can be loaded in Maschine+ in this page.

    https://www.native-instruments.com/en/products/maschine/production-systems/maschine-plus/sounds/


    Kontakt version in M+ is called Factory selection and contains only few instruments from Kontakt factory library, no other library can be loaded on it

    Nothing more is available on it, unless you sample the instruments with autosampler (as said above) and create your own instrument.

    Note that the last part of the page (the one after “CONNECT TO YOUR COMPUTER FOR EVEN MORE SOUNDS”) means you are using M+ as a controller for Maschine software (therefore like using a Maschine MK3) and not in standalone mode. The instruments listed there are run by the computer and not by Maschine+ itself.


«1

Answers

  • Sunborn
    Sunborn Member Posts: 1,552 Expert
    edited May 30

    Yes the can. But not all of them.

    Those who are officially supported by NI, usually can. Some others too as well.

    The rest can work too, but you have to do it manually, by saving the presets one by one.

  • ethnikman
    ethnikman Member Posts: 3 Newcomer

    Thanks @Sunborn for the quick response.

    Do you meant that presets needs to be saved manually (NKS) for the unofficial Kontakt libraries and custom ones?

    The officially supported one by NI or NI's libraries would work flawlessly?

  • LostInFoundation
    LostInFoundation Member Posts: 3,766 Expert
    edited May 30
    https://community.native-instruments.com/discussion/comment/73862#Comment_73862

    Really? How?

    Because the last information I had is that my Maschine+ only have few instruments from the Kontakt factory library (very few). No other NKS library can be loaded in M+, unless you sample them with autosampler

    Can you give some example of NI or 3rd party libraries that can be loaded in M+ standalone without the computer?

  • LostInFoundation
    LostInFoundation Member Posts: 3,766 Expert
    Answer ✓

    @ethnikman You can find anything that can be loaded in Maschine+ in this page.

    https://www.native-instruments.com/en/products/maschine/production-systems/maschine-plus/sounds/


    Kontakt version in M+ is called Factory selection and contains only few instruments from Kontakt factory library, no other library can be loaded on it

    Nothing more is available on it, unless you sample the instruments with autosampler (as said above) and create your own instrument.

    Note that the last part of the page (the one after “CONNECT TO YOUR COMPUTER FOR EVEN MORE SOUNDS”) means you are using M+ as a controller for Maschine software (therefore like using a Maschine MK3) and not in standalone mode. The instruments listed there are run by the computer and not by Maschine+ itself.


  • Sunborn
    Sunborn Member Posts: 1,552 Expert
    edited May 30
    https://community.native-instruments.com/discussion/comment/73878#Comment_73878

    Without the computer???? Of course not! How did you thought that? Without the software you have very limited options (if you have at all!)


    Edit: sorry, i didn't noticed the "without a laptop" on the original post :-)

  • Sunborn
    Sunborn Member Posts: 1,552 Expert
    https://community.native-instruments.com/discussion/comment/73867#Comment_73867

    Sorry, i somehow didn't paid attention to your "without a laptop" notice! My answer is correct if you use the software. If you don't, then i don't know, i always use software with my Maschine (or any other instrument)

  • ethnikman
    ethnikman Member Posts: 3 Newcomer

    Thank you all for your responses!

    It is a deal breaker for me unfortunately, since Push 3 standalone can handle the original Ableton project and I was hoping Maschine+ could handle clock sync'd live jamming on its amazing Kontakt libraries standalone.

    I'll keep bouncing audios from the Midi Kontakts tracks as WAV.

    Unfortunately, I won't go the M+ route (Yet). Hopefully in a software update or if the option (if ever) is going to be in a newer standalone Maschine ++

    Great community, thank you!

  • tetsuneko
    tetsuneko Member Posts: 349 Pro

    You can create custom Kontakt 6 patches and they will load up in Maschine+, but anything released for Kontakt Player will not work, nor will DRM-protected commercial kontakt libraries. Kontakt patches from indie vendors such as Past 2 Future samples should work though

  • LostInFoundation
    LostInFoundation Member Posts: 3,766 Expert
    https://community.native-instruments.com/discussion/comment/73941#Comment_73941

    😶

    I didn’t know even this. Do you have a custom patch to send me to test on my Maschine+?

  • tetsuneko
    tetsuneko Member Posts: 349 Pro
    edited June 1

    hmm, let's see. I can't send you any P2F samples patches (copyrighted), I'd have to sample a patch myself.. I'll see if I can get something cooked up before tomorrow (depending on workload)

    When authoring custom Kontakt patches, same things apply as with Reaktor content, must be made with the same version or earlier than what exist in Maschine+.. so that's Kontakt desktop 6.4.3 or earlier I think?

  • LostInFoundation
    LostInFoundation Member Posts: 3,766 Expert
    https://community.native-instruments.com/discussion/comment/74263#Comment_74263

    Thank you. But if you have to build it I can make it on my own to spare you the work. I thought you had something ready to test before putting work on it ☺️

  • tetsuneko
    tetsuneko Member Posts: 349 Pro
    https://community.native-instruments.com/discussion/comment/74264#Comment_74264

    oh, no need to test, I have been using custom Kontakt patches for a long time now, they work

    Anyways, just wrapping up one patch.. I'll just test it first on my M+ just as a sanity check - its almost 500MB though!

  • tetsuneko
    tetsuneko Member Posts: 349 Pro
    edited June 1

    Yepp, seems to work as expected! I didn't include any custom UI for the Kontakt patch, and didn't optimize the UI in Maschine, so loading the patch results in 16 pages of worthless parameters displaying "n/a" in the M+ UI, other than that, works as expected.

    I could share the patch (just a basic Korg M1 piano, sampled at every key of the keyboard via Maschine+'s autosampler), but not sure if there is any interest in such a thing in the community, considering it weighs almost 500 megs uncompressed.. and I've no sensible way of hosting such a file for any reasonable period of time anyways

    Kontakt desktop 6.7.1 is the version which has 100% parity with Maschine+ standalone.. I misremembered earlier when I thought it was 6.4.3 (that's Reaktor, mixed them up in my head LOL)

  • LostInFoundation
    LostInFoundation Member Posts: 3,766 Expert
    edited June 1
    https://community.native-instruments.com/discussion/comment/74280#Comment_74280

    But…wait…so you sampled it with M+ autosampler? This I knew it could be made (being it a feature of M+ itself, or even Maschine software).

    Is importing a Kontakt instrument (built by the user) that was new to me

  • tetsuneko
    tetsuneko Member Posts: 349 Pro
    edited June 1
    https://community.native-instruments.com/discussion/comment/74285#Comment_74285

    I used the autosampler to capture 128 notes at 100 velocity, saved them onto the SD card. I then copied those samples to my mac, opened Kontakt 6.7.1, created a new instrument, and imported those 128 sampled notes into Group 1, saved the patch with samples, copied to my my SD card, booted M+ in standalone, and loaded it in from the browser from INSTRUMENTS - KONTAKT - USER

    This was just a quick test, I should now spend the time creating sensible envelope and fx controls for the patch in Kontakt before resaving. Obviously, the benefits of Kontakt do not really come in to play with such a simplistic patch.. but remember, Kontakt 6 has access to Replika delays, Solid EQ & Compressor, granular synthesis, and that is just the start.. ;)

    Peeps are sleeping on the vast potential within.. same with Reaktor.. Maschine+ really comes into its own when you roll up your sleeves and start using the full suite of content authoring tools available for the platform. Why NI does not promote the DIY potential of M+, I will never know..

Back To Top

Categories