Gain Knob Doesn't Reset Filter

7Escher
7Escher Member Posts: 1 Newcomer
edited October 22 in Traktor Software & Hardware

Hello all. The gain knob button does not reset the filter knob whether it's set in SHIFT+Gain (for filter) or using the Gain knob on it's own.


Never had this issue before with Traktor Pro 2. Any way I can map a reset ?

Best Answer

Answers

  • Uwe303
    Uwe303 Moderator Posts: 4,022 mod
    edited December 2022

    Hello,

    can you tell what controller you use and what mapping? What software, i guess traktor 3? And yes you can normally map the reset for the filter.

  • Alex Dutch
    Alex Dutch Member Posts: 31 Member

    +1

    resetin knob to reset gain is not working anymore

    s4 mk2

    windows 10

    TP 3.8.0

  • Stevan
    Stevan Traktor Mapping Mod Posts: 2,044 mod

    Happens ever since 3.7

    The work around is to map the Gain Reset feature inside the Controller Manager.

    Add In --> Mixer --> Gain Adjust / type=button / mode=direct / value=reset (or 0.5)

  • beltron
    beltron Member Posts: 4 Member

    if the Gain knob is set to Filter as default, what's the mapping for Filter reset?


    the above input doesn't work, thanks in advance

  • Sûlherokhh
    Sûlherokhh Member, Traktor Mapping Mod Posts: 2,837 mod
    edited April 2023 Answer ✓
    https://community.native-instruments.com/discussion/comment/62267#Comment_62267

    What controller are you using? Make sure you have only one mapping for it in the controller manager. You have to add the assignment to the existing (empty) factory mapping. In and Out ports have to be assigned to your controller.

    C.Mng.3.jpg

    Do this for all filter/gain knobs (push). This is for the setting 'Filter (Shift:Gain)'. Just like @Stevan wrote.

  • beltron
    beltron Member Posts: 4 Member

    still using an S2MK1... it's still working with my new Ventura M2 MacBook Pro surprisingly, but did notice that the reset broke after 3.7.0 as well. my entries in Controller Editor were empty, but will try again according to your attachment later today.

  • Sûlherokhh
    Sûlherokhh Member, Traktor Mapping Mod Posts: 2,837 mod

    You are looking for filter reset, not gain reset, right?

  • beltron
    beltron Member Posts: 4 Member
    edited April 2023

    yes that's correct since I have the setting to use the Gain knob as Filter turned on - this is a setting and not that was added in CE. so i would like to be able to reset the filter by presseing the gain knob just like it did prior to 3.7.0 and want to do so using CE if that's the only way.

  • beltron
    beltron Member Posts: 4 Member

    this worked thank you!

This discussion has been closed.
Back To Top

Categories