Maschine MK3 - Phones routing output on one side of headphones only

ivi apricot
ivi apricot Member Posts: 26 Member
edited October 2024 in Maschine

I have my headphones connected to my 3.5 to 6.3 jack converter to my Maschine MK3 Phones port.

I can only head output from one side of my headphones.

I connect the same converter with same headphones cable to my Focusrite interface, and I can now hear on both sides.

Same thing on my digital keyboard.

Is my Maschine faulty, or can I adjust the settings in the hardware or software?

Thank you

Tagged:

Best Answer

  • ivi apricot
    ivi apricot Member Posts: 26 Member
    edited March 2023 Answer ✓

    @Uwe303

    Well,

    I set up the headphones to output 1 L and R.

    It now works.

    Somehow, when you start connecting other devices, you mess up the default setup =)

    Thank you

Answers

  • Uwe303
    Uwe303 Moderator Posts: 4,213 mod

    Hello,

    you can check maschine audio settings and output normally you have 1-2 and 3-4 go out to the interface 1-2; 3-4 outputs. 3-4 is headpone out on maschine, so you maybe set maschine out 1-2 to go to 3-4, if you want to listen only through headphones.

  • ivi apricot
    ivi apricot Member Posts: 26 Member
    edited March 2023 Answer ✓

    @Uwe303

    Well,

    I set up the headphones to output 1 L and R.

    It now works.

    Somehow, when you start connecting other devices, you mess up the default setup =)

    Thank you

This discussion has been closed.
Back To Top

Categories