S61 Mk2 Keybed Doesn't Initialize
When running the Komplete Kontrol VST in FL Studio; booting up the project with the plugin in it, and turning on the keyboard... the keybed doesn't work until I first push the MIDI button and then back to the KK mode (by pushing the 'Plugin' or 'Browser' button).
The lightguide won't work and it won't send note messages. It's dead until I first 'initialize' the keybed by going into MIDI mode first. This happens 90% of the time, but sometimes it just up and works fine, without any reason it worked that time. It's strange. Does anyone know why this is?
that's maybe because you have not selected a track with kk in it when opening the project?1
@SuperTRev If you open Komplete Kontrol in standalone, can you post a screenshot of the selected MIDI inputs & outputs?1
I tried clicking around with all kinds of things in FLS, but nothing seems to activate the keybed, except for me pushing those onboard buttons. Thanks anyway.0
I only have the one input selected. I forgot which drivers are for what, except I remember that I have EXT -1 set up in FLS to use the MCU driver for transport controls.0
Have you set the keyboard up as mackie control? I mean the DAW port from the S61. https://support.native-instruments.com/hc/en-us/articles/4406832231441-How-to-Integrate-KOMPLETE-KONTROL-with-Your-DAW0
Here's the FLS MIDI settings. KK - 1 I have in the output to 'send master sync' for the tempo clock.
I discovered that the 'Instance' button also initializes the keybed.0
Seems correct to me, the ext channels are for the physical midi in out on the back of the keyboard0
Ya. This wasn't an issue before and it's strange. If the setup is wrong you would think it wouldn't work at all ever, but it does work after going to MIDI mode and back. And randomly it just works without having to do that.0
@SuperTRev You should tick the Komplete Kontrol DAW port for input and output, also the Komplete Kontrol 1 as output. Doesn't that make a difference in FL Studio?0
Those were already enabled. And the 'SYNC' label means the KK -1 output is sending master sync to the keyboard.
The only NI driver that isn't enabled is the EXT - 1. I forgot what that does; thought it's for the MIDI thru or something.0
Try port 102 for the in and out DAW ports, in the FL forum they say you need to set that port for mackie control - maybe that helps0
Oh. Well, the transport controls were already working. Oddly I didn't have it set to sync. Now I enabled that. No idea what clock the play button was using to blink the metronome. I didn't realize it wasn't synced.
Tried port 102 and it didn't seem to change anything, but I will take your word on it supposed to be there, so I will leave it.
It's just two button presses, but it's the principle that bugs me. This problem shouldn't be happening. It's been fine without this issue for like a year now. I haven't used it a lot, so it's not like it's beat up.0
Mackie Control Universal | Forum (image-line.com) found it here, right now i install a trial and see it myself, i also saw while install, that you can wipe all old settings, so maybe that could be a solution for you, or at least worth a try0
The transport controls aren't the issue here. The keyboard not initializing its keybed on bootup is the issue.
The transport controls have always worked for me. Although I have no idea why the author of the controls decided to disregard the metro, tempo, undo and quantize buttons. And to not use the 'loop' button as the pattern/song mode toggle, having the endless encoder button press as the grid snap toggle instead, but ok.
I just double checked and this same problem is happening in the KK standalone app. So I will reinstall it and see if that fixes it.0
I know but the mackie is important, so komplete kontrol knows what channel you have selected and then can automatically focus to it, and if kk is loaded there focus on that instance of kk - as far as I know. I also can't find a way that it works, if i select the mixer, for example, i can use the 4d encoder to go through the tracks but it doesn't focus on kk if it is loaded on a track i select. But it should be if i remember correctly.0
- 12K All Categories
- 21 Welcome
- 544 Hangout
- 66 NI News
- 264 Tech Talks
- 1.2K Native Access
- 5.6K Komplete
- 725 Komplete General
- 1.3K Komplete Kontrol
- 2.1K Kontakt
- 563 Reaktor
- 180 Battery 4
- 312 Guitar Rig & FX
- 220 Massive X & Synths
- 260 Other Software & Hardware
- 2.6K Maschine
- 24 Sampling Room
- 3K Traktor
- 2.8K Traktor Software & Hardware
- Check out everything you can do
- Create an account
- See member benefits
- Answer questions
- Ask the community
- See product news
- Connect with creators