How do i get sound from my Maschine Mikro?

MMM
MMM Member Posts: 15 Member
edited October 2024 in Maschine

I can see a response on the application when I hit the pads, but no sound comes out the speaker. I have a komplete kontrol and the sound works for that application. I have my preferences set please see pics for reference. What am doing wrong or not seeing. Any help would be appreciated.

3.PNG

2.PNG

Best Answer

  • MMM
    MMM Member Posts: 15 Member
    Answer ✓

    OK. now i have sound through headphones, but still not the speakers. WTH I'm definitely never going to forget this one when it gets figured out.

«1

Answers

  • Uwe303
    Uwe303 Moderator Posts: 4,214 mod

    Hello,

    if you have maschine open and you press play do you see some meters moving, you also can go into the mixer view (top left 3 grey or white faders depending on the state), do you have sound if you play some yt videos or something else.

  • MMM
    MMM Member Posts: 15 Member

    Hello,

    Yes! the meters move. and yes it works for my komplete kontrol as stated above. i have a behringer audio interface with asio driver for it. do i need a separate asio driver for maschine mikro?

  • Uwe303
    Uwe303 Moderator Posts: 4,214 mod
    https://community.native-instruments.com/discussion/comment/164014#Comment_164014

    No you don't need a separate asio driver for maschine mikro, I looked again on your pictures and I missed the meters moving the first time. Everything is set up correctly as far as I can see. Is your speaker connected to output 1/2 at the behringer interface, even if I think yes, otherwise you wouldn't hear anything from Komplete kontrol stand alone.

  • MMM
    MMM Member Posts: 15 Member

    Ok Great didn't think so. Ive had speakers connected to that and the one that says 1-4 and still no sound.

    And the sound works fine on the complete controller.

  • Uwe303
    Uwe303 Moderator Posts: 4,214 mod

    What is the exact model of your Behringer umc, a 404?

  • MMM
    MMM Member Posts: 15 Member

    Yes 404 uhd

  • MMM
    MMM Member Posts: 15 Member

    Sorry just HD not a u in front.

  • MMM
    MMM Member Posts: 15 Member

    behringer Uphoria umc 404hd

  • MMM
    MMM Member Posts: 15 Member

    ok now you tubes will not play sound. oddly enough my komplete kontrol still delivers a sound to my speakers. and even weirder when my Kontol in on when i try the maschine app it registers as i can see the meters moving. so boht maschine and kontrol are recognized but no sound from mashine app. I get sound from Komplete kontorl app and now no sound when i try to play u tube videos.

  • Uwe303
    Uwe303 Moderator Posts: 4,214 mod

    Normally you use the main output on this interface, cause it´s regulated by the main out pot on the front. And the mix knob above must be set to PB.

  • MMM
    MMM Member Posts: 15 Member

    What is PB? I was so frustrated I did a hard reset on my brand new pc build and re installed everything. Still no sound. not even on the komplete kontrol LMAO

  • MMM
    MMM Member Posts: 15 Member

    single on the meters for both but no sound.

  • Uwe303
    Uwe303 Moderator Posts: 4,214 mod

    On front of the interface you have a mix knob, you mix there the output for the headphones out and main out between PB (playback from computer) and IN (inputs on the front for direct monitoring them)

  • Mark Oxley
    Mark Oxley Member Posts: 359 Pro
    edited July 2024

    I have the u-phoria UMC204HD, same unit but with 2 inputs on the front. Try setting mix all the way to the right on PB and main out at 12 o'clock as indicated in my attached picture.

    What output jacks are you connecting speakers too. You should be connecting to main out with TRS leads not the A and B RCA outs, these are for monitoring speakers.

    IMG_20240711_063846.jpg

  • MMM
    MMM Member Posts: 15 Member

    So basically your saying it wont play because im hooked up to my stereo? that doesn't make sense because i already had a sound coming form my komplete kontrol just not my maschine. this is getting crazy. all settings and drivers are installed.

    all of the setting on the uphoria pic is what i have on my audio interface.

This discussion has been closed.
Back To Top

Categories