Kontrol S88mk3 display mirrored - how can I fix that?

alpharecords
alpharecords Member Posts: 3 Newcomer
edited October 22 in Komplete Kontrol

for some reason the display is mirrored, power on off or reset did not help. What did I do wrong? I have no idea…

Best Answer

Answers

  • PoorFellow
    PoorFellow Moderator Posts: 4,894 mod
    edited May 30

    If keyboard is new and never been any other way plus you are referring to the way it displays text when not attached and the way that content is shown on keyboard screen when connected to the Komplete Kontrol app on computer then I think that you need to contact N.I. Hardware Support

  • alpharecords
    alpharecords Member Posts: 3 Newcomer

    the keyboard is 6 months old, yes I am referring to how everything is displayed. It is 180° flipped left/right no matter connected to the computer or to Komplete kontrol app. It for some reason did start behaving that way as per today. I thought I have activated an „option“ by mistake, but can not find anything regarding that so it maybe a hardware failure. Will contact support….

  • PoorFellow
    PoorFellow Moderator Posts: 4,894 mod

    It for some reason did start behaving that way as per today.

    In that case then the only 'reset' I know of is the below , but alas then I have no idea how far and how much it will reset. I suspect that it will sort of wipe as much as it can though I am not sure if it is able to return BIOS to factory but would suspect it to reset to factory settings for the present BIOS but I simply do not know.

    Power cycle the keyboard 5 times. At the 5th time, the recovery screen should appear and you can re-update the controller. In order to power cycle, turn on the device, wait 2-3 seconds and then turn it off again. Please repeat this 5 times.

  • alpharecords
    alpharecords Member Posts: 3 Newcomer

    thanks for your advice. Did everything what you've described, unfortunately with no effect :-/

    it is still flipped by 180º

  • PoorFellow
    PoorFellow Moderator Posts: 4,894 mod
    Answer ✓

    Did everything what you've described, unfortunately with no effect :-/

    Then I think that you need to contact N.I. Hardware Support .

This discussion has been closed.
Back To Top