Kontrol Z2 channel fader curve

D33p7
D33p7 Member Posts: 32 Member
edited October 22 in Traktor Software & Hardware
How to change the cutoff curve of channel volume faders?

I would like to be able to change the cutoff curve when I use analog vinyls for scratching, but also when I use software traktor.

How do I change the cutoff curve for both modes (analog/digital)?

Is there an instruction guide I can follow?

Thank you all
Tagged:

Best Answer

  • Martiniix_NI
    Martiniix_NI Customer Care Posts: 347 mod
    Answer ✓

    Heyo!

    This is not really possible in Traktor, as you might know the only adjustable feature for each channel would be the EQ and Filter adjustments.

    It is a bit complex since its not a really common suggestion but I would encourage you to experiment with these parameters!

    Screenshot 2024-05-03 at 11.25.36.png

Answers

  • Martiniix_NI
    Martiniix_NI Customer Care Posts: 347 mod
    Answer ✓

    Heyo!

    This is not really possible in Traktor, as you might know the only adjustable feature for each channel would be the EQ and Filter adjustments.

    It is a bit complex since its not a really common suggestion but I would encourage you to experiment with these parameters!

    Screenshot 2024-05-03 at 11.25.36.png

  • Stevan
    Stevan Traktor Mapping Mod Posts: 2,003 mod

    Creating different curve types is possible with modifiers but nobody made any instructions for it yet. Might need to add this to my tools section.

    Idea is to divide the fader range into several different sections where each section is changing the modifier value as you turn a knob or slide a fader. It really depends on what kind of curve would you like to create but once modifiers are set then you can use fader/relative message type to determine the speed of each section of the fader.

    Z2 faders wont accept button type of commands (which modifiers are) so for this to work you will need to map a global midi knob and use it to output the fader value into a modifier input command.

    Global midi knob overrides native control for Volume Adjust and everything is happening inside Midi.

  • Sûlherokhh
    Sûlherokhh Member, Traktor Mapping Mod Posts: 2,627 mod
    https://community.native-instruments.com/discussion/comment/151259#Comment_151259

    You beat me to it. The faderFX of the F1 TEKKEN mapping sprung to my mind right away, all using modifiers and then adding value changes of the parameters with varying percentages over the modifier range.

  • Stevan
    Stevan Traktor Mapping Mod Posts: 2,003 mod
    https://community.native-instruments.com/discussion/comment/151266#Comment_151266

    Here is original thread about basic of this modifier concept.

    https://forum.djtechtools.com/showthread.php?t=82323

  • Sûlherokhh
    Sûlherokhh Member, Traktor Mapping Mod Posts: 2,627 mod
    https://community.native-instruments.com/discussion/comment/151268#Comment_151268

    Thanks for digging out that one from of the treasure trove. 👍

  • pARty_bOy
    pARty_bOy Member Posts: 141 Pro
    edited May 3

    you can set the channel faders to logarithmic/linear using the calibration in Traktor settings, open settings window / traktor Z2 / Recalibrate Faders, move both faders down and press OK, then move both faders just a bit up and press OK. but it only works in Traktor, you would have to use the live inputs to have the same setting. wont work in Z2 standalone analog mode.

  • Sûlherokhh
    Sûlherokhh Member, Traktor Mapping Mod Posts: 2,627 mod
    https://community.native-instruments.com/discussion/comment/151342#Comment_151342

    So, you can deliberately de-calibrate your controls. I've never thought of that. Thanks. 😁

  • D33p7
    D33p7 Member Posts: 32 Member

    Thanks at all for info and suggestion

This discussion has been closed.
Back To Top

Categories